• Advances in concrete construction
• /
• 제6권3호
• /
• pp.311-322
• /
• 2018

This paper presents an experimental investigation on the performance of concrete with and without glass powder (GP) subjected to elevated temperatures. Mechanical and physicochemical properties of concretes were studied at both ambient and high temperatures. One of the major environmental concerns is disposal or recycling of the waste materials. However, a high volume of the industrial production has generated a considerable amount of waste materials which have a number of adverse impacts on the environment. Further, use of glass or by-products in concrete production has advantages for improving some or all of the concrete properties. The economic incentives and environmental benefits in terms of reduced carbon footprint are also the reason for using wastes in concrete. The occurrence of spalling, compressive strength, mass loss, chemical composition, crystalline phase, and thermal analysis of CPG before and after exposure to various temperatures (20, 200, 400, and $600^{\circ}C$) were comprehensively investigated. The results indicated that, the critical temperature range of CPG was between $400^{\circ}C$ and $600^{\circ}C$.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.23-26
• /
• 2007

In this study, recently it is urgently required that demolition waste concrete has to be recycled on the construction because urban development is accelerated and redevelopment project is rapidly expanded, production quantity of construction and demolition waste concrete is being increased. On the other hand, it has to be solved urgently the unbalance of demand and supply about the fine aggregate because the sea sand is restricted by exhaustion of river sand and intensification of environment influence evaluation. Therefore, the purpose of the study was to show the performance of the apparatus developed by the study and to propose the direction of the optimum operating conditions by having an experimental and positive evaluation about quality of recycled sand produced to develop a separating and selecting device of impurities for recycling of construction wastes which can have a bigger improvement of economical efficiency, productivity, environmental property and quality through a basic property of matter of recycled sand by each operating condition of sand flux in comparison with the existing production system of recycled sand.

• 환경위생공학
• /
• 제10권1호
• /
• pp.35-44
• /
• 1995

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul The responses from the 346 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful on 70.5% of total answers, but little portion(29.4 % ) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste system, the volume of refuse discharged in a day was decreased 30 ∼40% than before. In the problems of environmental sanitation after this system, the number of sanitary insect( cockroach etc ) and rat was decreased, also the production of orders and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuse was serious problems, the improvement for this one was demanded. The kind of difficult refuse treated was waste rubbers> electric products > furniture> foodstuffs> bottles, cans> papers, pulps etc, and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system In terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.

• 환경위생공학
• /
• 제13권1호
• /
• pp.82-90
• /
• 1998

The study was carried out to investigate on the response of environmental sanitation problems in action of the volume based waste charge system in Seoul. The responses from the 396 persons who dwelled in Seoul was stimulatively answered, this system was considered as a successful one 69.6% of total answers, but little portion (21.2%) of those was unknown on the mean of this system. And we knew that this system was need to the communication and education through the press media about this one. After the action of the volume based waste charge system, the volume of refuse discharged in a day was decreased 30-50% than before. In the problems of environmental sanitation after this system, the number of sanitary insect(cockroach etc) and rat was decreased, also the production of order and dust caused by refuse was decreased in comparison with those before. This results were considered that the Separate Collection should be perfectly performed. In response, the regular envelope of refuge was serious problems, the improvement for this one was demanded, The kind of difficult refuse treated was waste foodstuffs> electric products> rubbers> furniture> bottles, cans>papers, pulps etc. and the next proposal for this system should be prepared. Conclusively, the volume based waste charge system should be remarkable system in terms of resources recycling as well as wastes reduction. Above all in order to conform this system the separate collection system should be systematically performed, the next improvable proposal of the detailed methods in this system should be prepared.

• 한국전기전자재료학회논문지
• /
• 제33권4호
• /
• pp.310-314
• /
• 2020

Although waste oil derived fuel (WDF) production technology was developed under a government initiative ~10 years ago, it became stagnant owing to the small size of participating companies, residents' rejection of foul odor, and the nature of the technology for recycling waste that was avoided. However, this subject is under the spotlight again because of recent developments, such as garbage crisis. In particular, plastic is the most difficult waste to dispose of, with more than 4 million tons of plastic waste produced every year according to statistics from the Ministry of Environment. The most effective method for treating plastic waste is to produce WDF through low temperature thermal decomposition. The WDF includes several volatile ingredients that mostly limit the use of fuel for boilers, owing to safety concerns. In particular, flash point is legally stipulated because of secondary contamination in the distribution process and the risk of fire and explosion. It is required that external shipments (distribution) should be maintained in the range of at least 30~60℃ (excluding explosion prevention facilities) for diesel power generation. Therefore, this study seeks to find the flash point that is best suited to WDFs produced from plastic waste.

• 한국환경보건학회지
• /
• 제39권5호
• /
• pp.418-425
• /
• 2013

Objective: This study was carried out for the purpose of identifying major substances contributing to the production of odor and evaluating the characteristic of odors. Methods: Complex odor and 17 odorous compounds were measured at 18 waste transfer stations located in Seoul. Results: The dilution ratio value of complex odor ranged from 4 to 30 times in the boundary layer of 18 waste transfer stations. At 6 measurement points among the 18 waste transfer stations, the dilution ratio values exceeded standards (15 times). When the results were evaluated in terms of their contribution to the formation of malodor, the patterns indicated that the highest concentration values in the residential waste disposal process were of i-valeraldehyde and acetaldehyde, while butyraldehyde and acetaldehyde accounted for a large proportion of odorous compounds from the waste recycling process. Conclusions: It was found that butyraldehyde and acetaldehyde were the primary compounds released from the food waste disposal process. Overall, aldehyde compounds were the greatest contributor to detectable odor intensity emitted at the waste transfer stations.

• 대한안전경영과학회지
• /
• 제11권2호
• /
• pp.145-152
• /
• 2009

As the industry develops, the amount of wastes is increasing in the economic system with various needs. As a result, the environmental problems are emerging as serious social issues and all the parties are required to make their best efforts. Among the issues proposed as the environmental issues, the logistics-related issues are exhaustion of the resources, global warming, environmental pollution, and acidification and so on. In order to respond to the environmental issues of the earth, the advanced countries are setting retrenched goals, reduction of the new greenhouse gases and accomplishment of retrenched goals by cooperation between the nations. Economic activities inevitably bring environmental problems and logistics is implementing those activities. The companies should perform the roles to resolve the environmental problems as the main cause of environmental pollution. Therefore, along with spreading recognition of social demand, the companies are required to establish policies regarding the environment and they should approach the issues from the perspective of resource circulation. These environment-friendly activities are emerging as the new source of competitiveness in the logistics field. Therefore, this study analyzes the effects of environment-friendly logistics activities on the reduction of logistics cost to reduce and resolve the environmental issues such as environment preservation, recycling and so on.

• 한국분말재료학회지
• /
• 제24권4호
• /
• pp.315-320
• /
• 2017

There has been much interest in recycling electronic wastes in order to mitigate environmental problems and to recover the large amount of constituent metals. Silver recovery from electronic waste is extensively studied because of environmental and economic benefits and the use of silver in fabricating nanodevices. Hydrometallurgical processing is often used for silver recovery because it has the advantages of low cost and ease of control. Research on synthesis recovered silver into nanoparticles is needed for application to transistors and solar cells. In this study, silver is selectively recovered from the by-product of electrodes. Silver precursors are prepared using the dissolution characteristics of the leaching solution. In the liquid reduction process, silver nanoparticles are synthesized under various surfactant conditions and then analyzed. The purity of the recovered silver is 99.24%, and the average particle size of the silver nanoparticles is 68 nm.

• 복식
• /
• 제54권6호
• /
• pp.141-148
• /
• 2004

This study examines the dyeability of fabrics in relation to dyeing temperature, time, concentration, and the number of repeated dyeings. For this study, at first we extracted natural dyes from the peel of C.umshiu mandarin, which is fast as a dye and considered as recycling agricultural wastes. Additionally, it represents the image of Jeju Island. Then, we dyed cotton, wool, silk and nylon fabrics with the extracted dyes. The findings of this study are as follows. 1) Dyed cotton, wool, silk and nylon fabrics with the extract of C.umshiu mandarin peel are generally yellow. 2) Wool, nylon, silk, and cotton, in this order, are of good dyeability; Wool fabrics have the highest dyeability and cotton fabrics have the lowest. The dyeabilty of cotton fabrics was not improved even after dyeing in different conditions. 3) Colorfastness with washing, rubbing and perspiration are all good, while colorfastness with light is poor. 4) Higher dyeing concentration makes better dyeability. 5) Dyeability is enhanced as the dyeing temperature increases, while the dyeability of silk and nylon is relatively good even at low temperatures. 6) Looking at dyeability according to dyeing time, the longer the dyeing time, the better the dyeablility. Sixty minutes of dyeing time is appropriate to dye fabrics. 7) With an increase in the number of repeated dyeings, increased dyeability is obtaihed.

• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.44-52
• /
• 2007

Recently, oystershell wastes cause serious environmental problem and the need for the researches on the recycling of oystershell have been increased and various methods are already in operation. Field plate bearing tests and numerical analysis were performed to investigate the bearing capacity of oystershell filled geotextile gabion which utilized the waste oystershell at the coastal oyster farm site. The waste oystershell mixed soil specimens were prepared for the laboratory test and field test in terms of varying blending ratio of granite soil and oystershell. Based on the cyclic plate load test results, the spring constant, subgrade modulus of ground, and the reinforcing parameters were determined. The field plate load test results indicate that the bearing capacity of the soil ground with the oystershell mixed ratio of 20% is greater than that of the original ground. Two-dimensional numerical analysis was evaluated the expected deformation in the given conditions. Analysis results show a similar characteristics on bearing capacity with the results of the field plate load test. These findings suggest that the oystershells are very promising construction materials for landfill and earth embankment in coastal area.