• 한국포장학회지
• /
• 제21권1호
• /
• pp.19-26
• /
• 2015

종이팩 포장재는 크게 살균팩(Gable top carton)과 멸균팩(Aseptic carton)으로 구분할 수 있는데, 현재 종이팩 재활용 공정에서 가장 중요한 문제는 알루미늄 호일이 첩합된 종이팩이 화장지를 제조하는 재활용 공정에 유입될 경우 제품의 품질에 문제가 생길 수 있다. 최근에는 종이팩 상단의 마개나 종이팩 옆면의 스트로우 합성수지와 같은 성형구조물을 부착한 포장용기가 많이 판매되고 있는데, 이러한 성형구조물은 재활용에 방해가 되는 요인 중의 하나이다. 이와 관련하여 환경부는 2014 '포장재 재질 구조 개선 등에 관한 기준'을 고시하면서 재활용이 용이한 포장재(1등급), 재활용이 어려운 포장재(2, 3등급)로 구분하여 포장재 설계 시 가이드라인이 될 수 있도록 관련 지침을 발표하였다. 종이팩 몸체의 알루미늄 첩합(2등급)을 실리카 증착 등 투명필름 차단제(1등급)로 변경 시 재활용 공정 중 선별 작업의 효율화 및 재활용 수율의 증가를 통해 재활용 경제성을 증가 및 재생제품의 품질을 향상시키는 파급효과가 예측되었다. 또한 종이팩의 잡자재를 합성수지 성형 구조물(2등급) 사용을 제외할 시에도 펄프 회수율 상승과 재생 원료의 품질을 향상, 재활용 공정 중 선별 작업의 효율화를 통해 재활용 경제성을 증가시킬 것으로 예측된다.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• 자원리싸이클링
• /
• 제23권4호
• /
• pp.69-74
• /
• 2014

심해저 망간단괴를 용융환원 제련시 발생된 슬래그에 규사와 cokes를 일정량 배합하여 아크로에서 재용융하여 Fe-Si-Mn 합금철을 제조하는 과정에서 발생하는 2차 슬래그는 아직 특정 용도가 개발되지 않은 폐슬래그로 취급되는데, 이 폐슬래그의 재활용 방안에 대하여 요업 원료로의 활용가능성과 건설재료로의 활용가능성을 검토하였다. 망간단괴 폐슬래그를 포틀랜드시멘트, 캐스타블내화물과 같은 요업원료로 사용하는 것은 조성 차이가 많아서 직접적인 활용이 곤란하고, 다른 활용방법으로서 폐슬래그를 도로 노반재나 성토재 및 복토재 등과 같은 건설재료로 활용하는 것이 무난하다고 판단된다. 도로 건설재료로 사용시 혹시 있을지도 모를 토양 오염에 대비하여 유해물질들에 대한 용출시험을 KS 기준에 따라 수행한 결과 폐슬래그의 무해성을 확인할 수 있었다. 따라서, 망간단괴 폐슬래그를 도로 성토재나 노반재와 같은 건설재료로 활용하는 방안을 제안코자 한다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2005년도 춘계임시총회 및 제25회 학술발표대회
• /
• pp.206-208
• /
• 2005

• 세라미스트
• /
• 제14권2호
• /
• pp.7-14
• /
• 2011

This paper has investigated physicochemical properties and conventional and environmental-friendly treatment methods of paper mill sludge to emphasize the importance and necessity of the sludge recycling. The paper mill sludge generally shows high contents of calcium and water, and is mostly discharged by landfill after incineration process rather than being recycled due to technical or economical problems. In recent years, however, several possible methods for recycling the paper mill sludge have been suggested for its sustainable process as follows; compost, raw material for the construction and paper industry, new energy source for reducing fossil fuel use and raw material of activated carbon for treating paper mill wastewater. Thus the authors suggest that practical recycling technologies of the paper mill sludge must be developed for substantiality in the paper industry through comprehending physicochemical compositions and generation status of the sludge and actively performing various related studies. Furthermore, this investigation could be used as preliminary information for the study on recycled paper development using paper mill sludge incineration ash.

• 대한안전경영과학회지
• /
• 제9권3호
• /
• pp.85-93
• /
• 2007

The purpose of this study is to examine the actual condition of environment conscious logistics system which is essential to make material recycling economic society. Environment conscious logistics management which means simple recycling tends to promote material reduction, reuse and recycling. We have made some case studies about advanced environment conscious logistics system. To examine Korean companies,' environment-conscious logistics practices we made a survey form which contains 81 questions and asked companies to respond. Thus we have the analysis from the survey responses. As a result of this study, we propose the way of constructing environment conscious logistics system in Korea.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.381-386
• /
• 2001

The dust generated from the electric arc furnace steel making process is classified as hazardous material by Korean Environmental Protection Acts, mainly because of the existence of water teachable Pb, Zn and Cd. Thus the treatment of EAF dust is being carried out to fulfill both the environmental aspect and recovery of valuable metals. To establish the proper process for recovering the valuable metals (Fe, Zn, Pb and Cd) and producing the non-toxic slag from EAF dust, using RAPID-10 system, feasibility study have been carried out. To find out the scale-up factor for designing the commercial scale EAF dust treatment process(capacity 50,000 ton EAF dust per year) entitled RAPID-50 system. The design and construction of RAPID-50 (RIST Arc Plasma Industrial Device) system for treating 50,000 ton of EAF dust per year is now undergoing. Overall plan for treating EAF dust generated in KOREA will be setup after successful operation (December, 2002) of RAPID-50 system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.387-392
• /
• 2001

Kobe Steel, LTD. and Midrex Technologies Inc. jointly developed the FASTMET$\circledR$ process as a steel mill waste recycle technology in which the DRI product meets BF feed material or BOF/EAF feed material requirements. FASTMET(R) process turns value-less wastes into valuable DRI and sellable zinc oxide, and gives the solution for the steel mill wastes recycling from both economical and environmental viewpoints. During the development of the process, Laboratory, Pilot Plant and Demonstration Plant tests were carried out from 1990 to 1998. The first FASTMET(R) commercial plant began operation in April, 2000 and the second commercial plant started in April, 2001 Both commercial plants have proceeded successfully preying that FASTMET$\circledR$ is a suitable process for recycling steel mill waste and for producing DRI as an iron source.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.102-105
• /
• 2001

Gypsum has been known as a prominent material for improving alkali soil, and this material can be supplied easily in large scale by recycling waste gypsum plasterboard from construction and demolition sites in advanced countries. In April 2000, in the part of western Jilin Province in China, where alkali soil spread vastly, we conducted a cultivating experiment of corn and rice after treating with granule recycled waste gypsum at six alkali soil fields which total area were 14000$m^2$. We confirmed that pH of soil decreased in a short period and alkali soil changed soft a desirable condition for farm work, and furthermore, gypsum caused to accelerate the growth of a plant, both corn and rice.

• 한국전기전자재료학회논문지
• /
• 제26권5호
• /
• pp.415-420
• /
• 2013

The new recycling technology for aged Aluminum wires in overhead conductor have been carried out. We are attempting to develop remanufacturing method for them for more effective way of recycling in stead of its conventional remelting process. The weld of aged aluminum wires play a vital role in remanufacture process. The paper investigates the mechanical properties during cold welding process of aged Aluminum wire. The tensile tests and microscopic analysis results are discussed to underscore the hardening features of welded aluminum wire. Various graphs are presented accompanied by discussion about their relevance on the process.