• 펄프종이기술
• /
• 제47권2호
• /
• pp.24-33
• /
• 2015

This study aims to suggest wastewater treatment options for diaper recycling by identifying characteristic analysis of wastewater from diaper recycling process and efficiency evaluation of wastewater treatment units. The wastewater characteristic analysis showed that the concentration of organic pollutants and ionic materials were very high comparing to seawater. Through the investigation of similar wastewater treatment, six treatment units were identified to reduce pollutants. It is found UF(ultra-filtration), DAF(dissolved air flotation), fenton oxidation, electro-coagulation and chemical-coagulation are effective in reducing organic pollutants while membrane system and ion exchanger are effective in reducing ionic materials. Even though the target of water quality should be secured in terms of managing organic pollutants level, the application of treatment unit for reducing ionic material needs lots of considerations. This result suggests that reuse of pulping wastewater after controlling organic pollutants is better than direct discharge of pulping wastewater. To select the appropriate wastewater treatment unit, an economic analysis about operation condition, wastewater flow, cost, efficiency should be considered.

• 펄프종이기술
• /
• 제40권4호
• /
• pp.27-33
• /
• 2008

Polyethylene terephtahalate has been used in several areas such as fiber, film, bottle, and disposable products. Production of PET has been rapidly increasing these days. Since PET is a semi-permanent material, it has a non-biodegradable character in itself. Wasted PET products can cause serious environmental problems. Many countries around the world impose environmental legal restrictions over their abandonments. Many researches on the enviromental influence factors and treatment techniques of the wasted PET have been carried out. The main objective of this study is to develop a new sizing agent using recycling PET and improve its internal sizing effect. Dried powder of PET was used to make the modified PET. After extracting water-dispersible PET by subcritical hydrolysis, polyester resins have been extracted and triphenyl phosphate(TPP) has been added to obtain optimal internal sizing agent. It was found that the optimum dosage of TPP was 2% (per PET weight) and the hydrolysis temperature was independent on making the modified PET.

• 복식문화연구
• /
• 제25권3호
• /
• pp.315-326
• /
• 2017

The purpose of this study is to investigate the design methods and characteristics of papercraft fashion from 2001 to 2015. The study has been conducted through theoretical research and case study. Overall, types of papercraft expressions are classified into the following four categories: narrative papercraft fashion, organic papercraft fashion, variable papercraft fashion, and recycling papercraft fashion. The characteristics and aspects of each type of papercraft is described below. First, narrative papercraft fashion expresses as factual description of the natural environment. These works convey fantastic image by showing fairy tale animals or plants using paper folding or cutting. Second, organic papercraft fashion creates a futuristic shape by expressing organic parts in nature. Also, it often depicts future-oriented images by repeatedly representing organic shapes using uniform patterns in nature. Third, variable papercraft fashion expresses a variety of changing shapes through a flexible design based on the style of wearing. This variation may be accomplished through changeable dress connected to human gestures. Variable papercraft represents play-fulness, which conveys enjoyment to the wearer and the audience. Fourth, recycling papercraft fashion uses paper materials of the past, and recreates them into artworks through handicraft techniques. Recycling papercraft conveys high value added fashion by dissolving the material into pulp.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.3-7
• /
• 2007

알루미늄 지금 및 스크랩 용해시 발생되는 알루미늄 폐드로스를 사용하여 황산알루미늄(Alum)과 폴리염화알루미늄(pooly Aluminium Chloride: PAC)을 제조하였다. 알루미늄 폐드로스를 황산과 반응시켜 폐드로스 중에 잔류하는 금속알루미늄을 용액 중으로 침출시켜 황산알루미늄 용액으로 제조하였으며, 알루미늄 폐드로스를 염산과 반응시켜 PAC 용액으로 제조하여 수처리응집제로 재활용하고자 하였다. 이와 같이 알루미늄 폐드로스를 재활용함으로써 수산화알루미늄을 원료로 사용하여 황산알루미늄과 PAC를 제조하는 종래의 방법에 비해 제품의 원료비를 줄일 수 있고, 매립 등으로 폐기시켜야 할 폐드로스의 양을 줄이는 효과가 있었다.

• 한국가구학회지
• /
• 제27권1호
• /
• pp.15-25
• /
• 2016

Increasing concerns of environment need to make change furniture field to more environmentally friendly approach, such as reuse of by-products from wooden products. As it is, the methods of recycling wood for industrial purposes have the advantage of productivity and adaptability. However, the industrial way is required a certain production facility of processing wooden by-products and has possible hygienic problems due to contaminated sources. Many designers have developed their own methods for reuse of wood in unique and artistic ways. Even so, because of confined sources, it could be not enough supply. Therefore, I developed the design methodology utilizing wooden by-products from S Design Company to relieve former ways' problems. The design suggestion took materials from a safe and abundant source. The wooden leftover pieces were connected together with epoxy clay, so previous process traces of furniture are remained as a decorative factor. Moreover, the synthesized material was able to be processed by ordinary woodworking facilities without additional installations. In doing so, console table focused on a commercial purpose and dining table for an artistic objective were successfully fabricated as final suggestions. In consideration of the proposal using wooden furniture leftovers, diverse recycling designs should be investigated for future reference.

• 자원리싸이클링
• /
• 제15권4호
• /
• pp.60-63
• /
• 2006

국내 알루미늄 재생업체에서 알루미늄 용해시 발생되는 알루미늄 폐드로스를 사용하여 수처리응집제로 사용되는 황산알루미늄을 제조하였다. 알루미늄 폐드로스를 황산과 반응시켜 폐드로스 중에 잔류하는 금속알루미늄을 황산알루미늄용액으로 제조함으로써 수산화알루미늄을 원료로 사용하여 황산알루미늄을 제조하는 종래의 방법에 비해 제품의 원료비를 줄일 수 있고, 알루미늄 폐드로스를 재활용함으로써 매립 등으로 폐기시켜야 할 폐드로스의 양을 줄이는 효과가 있었다.

• 한국폐기물자원순환학회지
• /
• 제35권8호
• /
• pp.709-720
• /
• 2018

Since the import ban of plastic waste in China has been enforced, plastic wastes were not properly collected and recycled in Korea. Hence, the management strategies for plastic waste in Korea should be improved by examining the regulations and policy in developed countries such as United States, Japan, EU and United Kingdom. The management strategy for the recycling cycle should be implemented to expand the labeling system of separation and discharge, reduce the consumption of plastic products, automate the separation and sorting method in recycling facilities, and improve the economical efficiency of the recycling cycle. The concept of residual waste (secondary waste) in the material flow analysis should be implemented to identify the shortage point in the plastic waste stream. Finally, the cooperation with international communities is required for a transboundary movement of plastic waste, which includes participation at the working group of international standards to recycle plastic waste.

• 유기물자원화
• /
• 제30권2호
• /
• pp.5-15
• /
• 2022

본 연구에서는 궐련형 담배의 담뱃잎 바이오매스 폐기물을 수거하여 슈퍼커패시터용 활물질로 제조 및 응용하였다. 수거한 담뱃잎 폐기물을 질소 환경에서 다양한 온도(800/850/950℃)로 탄화하였으며, 탄소/산소 성분비(C/O ratio) 분석을 통해 850℃에서 가장 우수한 품질의 탄소 물질이 제조되었음을 확인하였다. 추가적으로 담뱃잎 기반의 탄소 물질에 폴리피롤(Polypyrrole)을 저온중합법을 통해 코팅하여 전기화학적 성능을 향상시켰다. 탄소 물질(CTL-850)과 폴리피롤을 코팅한 탄소 물질(CTL-850/PPy)을 기반으로 한 전극의 전기화학적 성능을 측정한 결과, -1.0-0.0V와 0.0-1.0V의 전위창에서 각각 100.2F g^-1@1 A g^-1과 155.3F g^-1@1 A g^-1의 우수한 비정전용량(Specific capacitance)를 나타내었다. 두 개의 전극을 활용하여 비대칭형 슈퍼커패시터 소자(Asymmetric supercapacitor device)를 제작하였으며, 제조한 비대칭형 CTL-850//CTL-850/PPy 소자는 2.0V의 구동전압 범위와 비정전용량(31.1F g^-1@1 A g^-1)을 가지고 있음을 확인하였다. 또한, 제조한 슈퍼커패시터 소자의 방전을 통해 1.8V의 Red Led를 점등할 수 있음을 확인하였다. 본 연구 결과를 통해 바이오매스를 우수한 성능의 친환경 에너지 저장매체로 활용하는 후속 연구에 대한 방향성을 제시할 수 있을 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.156-157
• /
• 2014

Inorganic binding material was made by recycled resource and its applicability as pile-filling material was examined. The result was that the material had same liquidity with the liquidity of OPC and high reactivity with site soil. According to dynamic/static loading tests by site test-construction, the inorganic binding material met both design bearing capacity and settlement. Since the inorganic binding material showed same or better performance than OPC, the utilization possibility of the inorganic binding material made of recycled resource as pile-filling material was verified.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.8-10
• /
• 2013

Inorganic binding material was made by recycled resource and its applicability as pile-filling material was examined. The result was that the material had same liquidity with the liquidity of OPC and high reactivity with site soil. According to dynamic/static loading tests by site test-construction, the inorganic binding material met both design bearing capacity and settlement. Since the inorganic binding material showed same or better performance than OPC, the utilization possibility of the inorganic binding material made of recycled resource as pile-filling material was verified.