• 한국산학기술학회논문지
• /
• 제14권6호
• /
• pp.3089-3095
• /
• 2013

흡음재로 널리 사용되는 헤드라이너는 발포성 폴리우레탄(PU foam)과 유리섬유(Glass Fiber,GF) 로 구성된 복합재료로, 제품의 생산 공정을 거치는 동안 부산물 형태의 폐기물이 발생한다. 헤드라이너 폐기물에 대한 효과적인 재활용을 위해 헤드라이너 구성성분에 대한 분리공정이 중요한 문제점이다. 헤드라이너에 대한 열분석결과에 의하면 중량의 감량 비율은 $400^{\circ}C$까지의 온도범위에서는 발포성 폴리우레탄 > 비발포성 폴리우레탄 > 부직포 > 1st layer > 유리섬유의 순으로 감량이 증가하는 결과를 보이고 있다. HDPE, LLDPE, PP 그리고 Master Batch 에 첨가제 형태로 폐 스크랩 첨가하여 sheet를 제작한 후 DSC 특성을 분석한 결과 PP를 제외한 다른 물질들에서는 결정화에 따른 발열전이가 나타나지 않는 것을 확인 하였다.

• 한국건축시공학회지
• /
• 제3권1호
• /
• pp.123-129
• /
• 2003

The production accounts of domestic by-product is increased after 1990's. It is worried about the life reduction of dump land, as dump land's capacity have reached to limitation and the amount of construction industrial wastes is going higher. Recently, recycling aggregates could be gained from the reconstruction works using recycle process, and the study research of recycle concretes developed concrete application methods. It could put some outcome of studies to practical use for concrete products. The methods of crushing waste concrete are going diverse. In this study. the fundamental experiments and recycling application is investigated and analyzed with use of recycling aggregate which made of mechanical crush and underwater electrical impact crush, and the difference between underwater electrical impact crush, mechanical crush and natural aggregates is studied.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술논문발표회
• /
• pp.51-55
• /
• 2002

The production accounts of domestic by-product is increased after 1990's. It is worried about the life reduction of dump land, as dump land's capacity have reached to limitation and the amount of construction industrial wastes is going higher Recently, Recycling aggregates could be gained from the reconstruction works using recycle process. and the study and research of recycle concretes developed concrete application methods, It could put some outcome of studies to practical use for concrete products. The methods of crushing waste concrete are going diverse. In this study, the fundamental experiments and recycling application is investigated and analyzed with use of recycling aggregate which made of mechanical crush and underwater electrical impact crush. and the difference between underwater electrical impact crush, mechanical crush and natural aggregates is studied.

• 유기물자원화
• /
• 제15권4호
• /
• pp.100-106
• /
• 2007

피혁 제조 공정중 탈모 공정 이후 나피를 분할(Splitting)하여 얻어지는 피혁 가공 부산물(Limed pelt scrap)을 이용하여 탈회 및 탈지 과정의 전처리 공정을 거친 뒤 비크롬 탄닝과 열처리에 의한 방법과 glycidyl methacrylate (GMA)와 MMA와 같은 아크릴 모노머를 이용한 그라프트 공중합을 이용한 방법으로 우수한 내열성을 갖는 미세 콜라겐 분말을 제조하였다. 물성의 비교에서 본 연구의 방법으로 생산된 콜라겐 분말들이 열분해 온도, 열 저항성, 수분변화, 입도분포 등에서 더 나은 특성을 보였다.

• 자원리싸이클링
• /
• 제27권5호
• /
• pp.61-68
• /
• 2018

알루미늄 드로스는 알루미늄 용해 공정에서 용탕 표면에 발생하는 산화물 덩어리로서, Salt 유무에 따라 화이트드로스와 블랙드로스로 구분된다. 화이트드로스의 경우 금속 함량이 높아 용해 공정으로 재활용 되지만, 블랙드로스는 금속 함량이 낮고 성분 분리가 어려워 대부분 매립 처리되며, 물과 반응하면 가스와 발열 반응이 일어나 토양오염의 원인으로 작용한다. 하지만 블랙드로스에는 NaCl과 KCl과 같은 Salt 성분과, $Al_2O_3$, MgO와 같은 무기소재가 포함되어 있어 이러한 유가자원을 회수하고 소재화하는 기술 연구가 필요하다. 본 연구에서는 알루미늄 블랙드로스를 재활용하기 위한 공정을 제시하였다. 파쇄-용해(Dissolution)-고액분리-감압증발을 거치는 공정을 통하여 블랙드로스에 존재하는 무기물과 용해성 물질을 분리하였다. 물과 블랙드로스 함량을 제어하여 조건에 따라 분리물의 회수율을 최적화하였으며, 블랙드로스:물 비율이 1:9 일 때 91 wt.%의 Salt flux 회수율을 보임을 확인하였다. 추가적으로, 회수된 무기물을 이용한 제올라이트의 합성을 통하여 블랙드로스의 소재화 가능성을 확인하였다.

• 자원리싸이클링
• /
• 제25권3호
• /
• pp.29-36
• /
• 2016

폐콘크리트의 순환자원화 과정에서 발생되는 슬러지의 활용 방안을 찾기 위하여, 기본특성 분석과 고알칼리 상등수의 pH 중화실험을 수행하였다. 슬러지의 평균입도(d50)는 $42.4{\mu}m$이며, -$45{\mu}m$ (-325 mesh) 크기의 미립자가 전체 슬러지 질량의 60% 이상을 차지한다. 미립자의 주요광물은 백운모와 탄산염광물이었으며, 미립으로 갈수록 탄산염 광물의 비율이 늘어났다. 또한 미립으로 갈수록 중금속의 함량이 증가했는데, 토양오염 우려기준의 2지역 기준값 보다는 낮았다. 고액분리를 위한 응집제의 사용은 기존 공정에서 과량의 응집제를 사용하고 있어서 별다른 효과를 관찰할 수 없었다. 슬러지 pH (약 12)가 높기 때문에 산 첨가에 의한 중화효과가 미미하였지만, 슬러지가 포함하고 있는 높은 농도의 Ca이온으로 인해 $CO_2$ 가스를 주입하는 방법으로 8.5 미만으로 중화가 가능하였다. 또한 침전물에 대한 XRD 분석 결과는 고순도의 $CaCO_3$로 회수될 수 있음을 보여주었다.

• 한국농공학회지
• /
• 제42권5호
• /
• pp.59-69
• /
• 2000

Sludge is generated in the process of water and wastewater treatment, and it has been causing various environmental problems. From this point of view, recycling of sludge appears to be the best way. The firing technology in pottery industry is applied to the sludge treatment , and the final product is called artificial soil. The effect of mixed artificial soil with upland soil was investigated through the crop growth experiment and the physical & chemical characteristics of the mixed soils were analyses. After the growth experiment , mixed soil plots contained more CEC, OM, TN, TP than upland soil plots. This result shows that the artificial soil produced form sludge can be mixed with upland soil, and crop can be increased. From the growth analysis, growth of soybean and corn in the mixed soil plots was better than that in the original upland soil plots. Heavy metals contents in the mixed soil plots were within the quality standard. This is a promising result since in most cases heavy metals are the most concern in the application of sludge product to farmland.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.625-629
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS (Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.225-239
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.141-159
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.