본 연구에서는 높은 역학적, 내구적 성능이 확보된 UHPC(Ultra High Performance Concrete) 배합을 기반으로 보수재료를 개발하기 위해 일반 콘크리트 보수면을 대상으로 부착성능을 평가하였다. 보수 대상 모체의 표면의 거칠기와 습윤 상태 그리고 보수재료 배합에 폴리머 혼입 및 PP, PVA 섬유 사용을 고려하여 총 10가지 시험 변수를 적용하였다. 폴리머를 혼입함에 따라 큰 폭의 강도 저하가 발생하였으며 이는 워커빌리티 조정을 위해 추가로 사용한 감수제의 영향으로 사료된다. 또한 플라스틱 계열 섬유를 혼입함에 따라 플로우가 최대 13.8 % 감소하였다. 부착면의 상태를 고려한 보수재료의 부착 강도 평가 결과 UHPC 기반 보수재료를 사용하는 경우 보수 대상 모체의 표면이 건전하다면 별도의 면 처리 작업 없이 높은 부착성능을 확보할 수 있는 것으로 판단된다. 또한 UHPC 기반 보수재료는 부착면의 습윤하더라도 높은 부착성능을 나타내었다. 추후 UHPC 기반 보수재료의 개발을 위해 숏크리트 적용과 구배 타설에 대한 연구가 진행될 예정이며 콘크리트 구조 보수재료로써의 경제성과 성능 확보를 위해 지속적인 보수재료 배합 개선이 수행될 계획이다.
오늘날 기업들에서는 폐기물을 감량화, 재활용, 재이용하기 위해 노력하고 있다. 폐기물이 재활용되고 있지만, 많은 폐기물이 소각 또는 매립되고 있다. 이러한 문제를 해결하기 위하여, 산업단지를 중심으로 폐기물을 재활용하기 위한 다양한 사업이 진행 중이다. 하지만, 폐기물 재활용에 대한 정보의 부족으로, 재활용가능 폐기물은 여전히 소각되거나 매립되고 있다. 이러한 배경 하에, 본 연구는 기업의 폐기물을 원료로 재활용하는 폐기물 자원순환에 의해 저감되는 탄소배출량과 경제성 평가방법을 제시하고자 한다. 그 평가방법을 적용하여 폐합성수지와 폐유기용제의 자원순환사례를 평가하였다. 재활용과 소각 측면에서 환경적 및 경제적인 측면을 분석하였다. 폐플라스틱을 원료로 재이용함으로써, 탄소배출량은 2009년에 1,0705톤, 2010년에 1,234톤이 저감되었으며, 비용은 2009년에 6.57억원, 2010년에 7.55억원이 저감되었다. 폐유기용제를 재활용 할 시에는 2010년에 7.3톤, 2011년 5.6톤의 탄소배출량이 저감되었으며, 비용은 2010년에 1,591만원, 2011년에 1,218만원이 저감되는 것으로 나타났다.
폐소형가전의 재활용 공정에서 발생하는 플라스틱류 중 검정색 플라스틱의 경우 재질 선별이 어려워 혼합물의 형태로 저급 재활용 되고 있다. 본 연구에서는 검정색 플라스틱의 재질별 선별을 위하여 비중선별, 정전선별, 근적외선 선별 및 IR/Raman 분광법 등 기존 선별 기술의 검토를 통하여, 현장 적용에 대한 문제점 및 제한사항을 확인하였다. 검정색 플라스틱의 재질선별에 대한 기술적 한계를 극복하기 위하여 레이저유도붕괴분광법(Laser Induced Breakdown Spectroscopy, LIBS)을 이용하여 검정색 플라스틱의 각 재질별 LIBS 스펙트럼을 분석하였으며, 정규화 과정을 수행한 후 차원축소 알고리즘인 주성분 분석(Principal Component Analysis, PCA)을 수행하였다. 또한, 검정색 플라스틱의 각 재질별 LIBS 스펙트럼 분석 및 주성분 분석을 통하여 향후 재질별 인식 및 선별 기술의 현장적용을 위해서는 추가적으로 해결해야 할 문제점을 확인하였다. 검정색 플라스틱의 재질별 인식의 정확성 및 선별효율의 향상을 위하여 지능형 알고리즘 분야의 연구를 통하여 효율이 우수한 분류기를 설계하고 분류기의 성능 및 신뢰도 향상을 위한 연구가 추가적으로 진행되어야 할 것으로 사료된다.
정부의 종량제 시행 15년의 결과로 생활폐기물 발생량이 감소하고 재활용품의 양이 증가하는 등 사회 경제적 편익이 발생하는 긍정적인 성과가 나타났다. 그럼에도 불구하고 쓰레기 분리 배출방법에 대한 사용자의 인식 부족으로 인해 음식물이 종량제 쓰레기봉투에 담겨 버려지는 등 사용방법에 대한 문제점들이 꾸준히 제기되는 실정이다. 이에 본 연구는 종량제 쓰레기 봉투에 인쇄되어 전달되는 시각정보들을 재정비함으로써 사용법에 대한 정보를 효율적으로 전달하기 위한 방법을 모색하고자 하였다. 따라서 시각정보디자인 관점에서 총 9개의 국내·외 종량제 쓰레기봉투 사례를 조사·분석하고, 서울시 3개구의 종량제 쓰레기봉투에 대해서는 사용자 인식조사와 설문조사를 실시하여 사용자가 선호하는 항목을 확인 할 수 있었다. 이를 토대로 종량제 쓰레기봉투에 기재할 정보를 선별하고 위계질서를 정립하였으며 사용법에 대한 정보를 그래픽으로 나타내어 정보전달의 주목성과 효과성을 향상시킨 디자인 개선안을 제안하였다. 또한, 디자인 개선안에 대한 사용자 인식을 비교 평가함으로써 디자인 개선안의 타당성을 검증하였다.
본 연구에서는 탄소섬유강화플라스틱(CFRP)을 열분해하여 얻은 폐 탄소섬유를 이용하여 기상 불소화를 통해 불화탄소를 제조하고 리튬일차전지의 환원극 소재로 재활용하고자 하였다. 먼저 열분해로 얻은 폐 탄소섬유의 물리화학적 특성을 파악하였으며, 이 폐 탄소섬유에 기상 불소화 효과를 평가하기 위하여 불화탄소의 구조적, 화학적 특성을 분석하였다. XRD 분석에 의해 폐 탄소섬유의 육각망탄소 적층구조(002피크)는 기상 불소화의 온도가 증가함에 따라 점차 불화탄소 구조(001피크)로 전환되었음을 확인하였다. 이 불화탄소를 이용하여 제조된 리튬일차전지의 방전용량은 최대 862 mAh/g이었다. 이는 다른 탄소 재료로 제조한 불화탄소 기반 리튬이온차전지의 방전용량과 비교하였을 때 우수한 성능을 보였다. 이러한 결과는 폐 CFRP 기반 폐탄소섬유를 이용한 불화탄소는 리튬일차전지의 환원극 소재로 활용할 수 있을 것으로 여겨진다.
The purpose of this study is to develop home economics educational programs on the theme of 'improving consumer life' for sustainable development. It is a program to enhance the changemaker mindset for responsible production and consumption among the 17 goals of the Sustainable Development Goals(SDGs). The program was developed 8 that to make solar cookers, make household goods from recycled materials, change maker-practice green life, eco-friendly journal 1, plastic warnings, design alternatives for disposable products, change maker-efforts and eco-friendly journal 2. The developed program was validated 3 times by a group of experts and students. This program has the following features. First, the Home Economics Education(HEE) program under the theme of 'Improving consumer life' for sustainable development are carried out at the stage of change-maker education with project-based process. It can improve students' collaboration skills, self-directed skills, communication skills and problem solving skills. Second, eight programs can increase understanding and interest in sustainable development, and learners are interested in social issues. This program can raise learners who play an active role in solving social problems by increasing their interest and interest in the class, free from the form of passive classes. Third, the HEE programs under the theme of 'Improving consumer life' for sustainable development are meaningful in that they are closely related to students' lives and encourage them to practice in their own lives. Fourth, since the program is well-suited to the present time and includes content elements for sustainable development, it can induce changes in learners' perceptions, attitudes and behaviors.
In Korea, the Vehicle Dismantler and Recycler industry is supervised by the Ministry of Land, Infrastructure and Transport under the Automobile Management Act. Also, Korean Automotive recycling businesses are supervised by the Minister of Environment under the Resource Recirculation Act. The main concern of the Minister of Environment is how the wastes from Dismantled vehicles will be environmentally removed, stored, treated, recycled or disposed. In 2000, the European Union (EU) adopted the End-of-Life Vehicles Directive (2000/53/EC) which required Members to ensure the collection, treatment and recovery of end-of-life vehicles (ELVs). The Directive, the most tightly regulated and precautionary legal systems, required that the last owner of a vehicle could drop off the ELV at an authorized treatment facility and that the producers of the ELV should pay the cost of the program. The adoption of the ELVs directive has led the development of Automotive Dismantler and Recycler networks to reuse, refurbish, remanufacture, recycle and recover parts and materials embedded in ELVs. Also, the ELVs directive which has had an insignificant impact on Korean manufacturers has strong presence in the European market and has been successfully externalized on them. The Korean manufacturers not only achieve the 85% recycling target set by the ELVs directive but also meet the Extended Producer Responsibility (EPR) which requires manufacturers to contribute dismantling process. In order to improve the Korean vehicle dismantling and recycling system, the Automobile Management Act and the Resource Recirculation Act should be harmonized. Particularly the roles of the Ministry of Land, Infrastructure and Transport and the Minister of Environment should be sharply divided. Like Japan, the ELV management needs to be highly centralized, regulated, and controlled by the ministry specialized in Vehicle, namely the Ministry of Land, Infrastructure and Transport and the sub organizations. Like EU Members, recovery, reuse, and recycling must be distinguished. Recovery is defined as the final productive use of the parts and materials embedded in ELVs, which includes reuse and remanufacture of parts and recycling of the other materials. Dismantling process and reuse and remanufacture of parts must be governed by the Ministry of Land, Infrastructure and Transport. For environmental recycling or disposal of waste materials, such as CFCs, glass and plastic material, and toxic substances, governmental financial support system should be in place.
플레저 선박은 주로 FRP(Fiber reinforced plastic)를 주재료로 제작되고 있으나 2000년대에 들어오면서 FRP 선체에 대한 환경오염 및 해양안전에 관한 법규 규제가 강화되고 있다. 즉, FRP는 재활용이 불가능하며 폐기시 자연에서 분해되는 데 100년이상 걸리는 매우 반환경적 특성을 가지고 있다. 일반 선체 재료로서는 강, 알루미늄, FRP를 제안하고 있으며 이에 따른 구조설계규격 및 재료설계강도를 제안하고 있다. 그러나 소형 선박에 적합한 염가 재료에 대한 연구는 전혀 진행되지 않고 있으며 단지 소형조선산 업계에서 카누나 카약 선체를 폴리에틸렌을 이용하여 제작하여 판매하고 있다. 따라서 본 연구에서는 고 밀도 폴리에틸렌을 이용하여 보트를 설계 및 제작하기 위하여 실적선을 기초로 선체의 선형을 완성한 뒤 ISO 12215-5의 소형 선체에 대한 구조설계기준을 적용하여 선체 치수를 결정하였다.
Building on/with expansive soils with no treatment brings complications. Compacted expansive soils specifically fall short in satisfying the minimum requirements for transport embankment infrastructures, requiring the adoption of hauled virgin mineral aggregates or a sustainable alternative. Use of hauled aggregates comes at a high carbon and economical cost. On average, every 9m high embankment built with quarried/hauled soils cost $12600MJ.m^{-2}$ Embodied Energy (EE). A prospect of using mixed cutting-arising expansive soils with industrial/domestic wastes can reduce the carbon cost and ease the pressure on landfills. The widespread use of recycled materials has been extensively limited due to concerns over their long-term performance, generally low shear strength and stiffness. In this contribution, hydromechanical properties of a waste tyre sand-sized rubber (a mixture of polybutadiene, polyisoprene, elastomers, and styrene-butadiene) and expansive silt is studied, allowing the short- and long-term behaviour of optimum compacted composites to be better established. The inclusion of tyre shred substantially decreased the swelling potential/pressure and modestly lowered the compression index. Silt-Tyre powder replacement lowered the bulk density, allowing construction of lighter reinforced earth structures. The shear strength and stiffness decreased on addition of tyre powder, yet the contribution of matric suction to the shear strength remained constant for tyre shred contents up to 20%. Reinforced soils adopted a ductile post-peak plastic behaviour with enhanced failure strain, offering the opportunity to build more flexible subgrades as recommended for expansive soils. Residual water content and tyre shred content are directly correlated; tyre-reinforced silt showed a greater capacity of water storage (than natural silts) and hence a sustainable solution to waterlogging and surficial flooding particularly in urban settings. Crushed fine tyre shred mixed with expansive silts/sands at 15 to 20 wt% appear to offer the maximum reduction in swelling-shrinking properties at minimum cracking, strength loss and enhanced compressibility expenses.
Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.