• 한국추진공학회지
• /
• 제18권3호
• /
• pp.78-83
• /
• 2014

항공기 또는 유도무기와 같은 고속 비행체의 가압식 연료탱크에는 연료가 한 방향으로 몰려 이송이 단절되는 것을 방지하기 위해 특별한 유로개방장치가 필요하다. 이러한 필요에 의해 가속도추종 방식의 유로개방장치가 발명되었으며 본 논문에서는 이 장치의 구동성능을 예측하고 성능에 영향을 미치는 주요 파라미터의 선정을 위해 동역학 해석 프로그램인 RecurDyn을 이용해 해석을 수행하였다. 해석결과를 통해 장치의 내부 균형추가 연료의 쏠림을 잘 추종해 유로를 개방시키는 것을 확인하였다.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.98-103
• /
• 2015

가속도추종 유로개방장치는 고속 비행체의 가압식 연료탱크에서 연료가 쏠림현상으로 인해 단절되는 것을 막아 연속적으로 흐르게 한다. 기개발된 이 유로개방장치를 실제 고속으로 시험하는 것은 까다로운 시험조건과 비용문제로 많은 어려움이 따른다. 따라서 본 논문에서는 저속 항공기에 탑재해 기본적인 역중력 시험(Negative-g test)을 수행하고 RecurDyn으로 해석한 결과와 비교하였다. 그리고 고속비행체의 비행궤적에 따른 유로개방장치의 동역학적 거동을 RecurDyn으로 알아보았다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.430-437
• /
• 2000

Fertilizer impaction mechanism was simulated using a commercial program RecurDyn$^{(R)}$ a dynamic program that could handle contact problems. Even if there had been numerous papers on modeling of fertilizer applicator, the performance predictions were not satisfactory due to simplification in modeling. The most significant simplification was assumption of fertilizer particles as a solid particle. The assumption would eliminate rotation of fertilizer particles during the impaction mechanism. However, impaction of rotating body would be different from that of a solid particle. This paper introduced how the impaction was modeled using RecurDyn$^{(R)}$. In order to simulate, restitution coefficient and contact time was measured. A stiffness coefficient and a damping coefficient of a fertilizer was theoretically estimated using the measured data. Validity of the simulation result was not proved yet, but judged to be promising.ged to be promising.ing.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.107-115
• /
• 2015

유연 다물체 동역학은 실제 시스템을 가능한 유사하게 수치화하여 해석할 수 있기 때문에 일반 동역학 연구에 대한 차세대 주제로 각광을 받고 있다. 이러한 유연 다물체 동역학에 대한 해석 기술은 리커다인이라는 상용 소프트웨어에 효과적으로 적용되어 있는데, 특히 강체와 유연체를 통합하여 하나의 솔버에서 해석을 할 수 있는 특징을 가지고 있다. 본 논문에서는 이러한 리커다인의 유연 다물체 동역학 솔버의 기술들을 살펴보고자 한다. 기본적으로 리커다인의 유연 다물체 동역학 해법은 동시회전 기법을 사용하는 증분 유한요소 정식화를 기존의 순환공식을 이용한 동역학 정식화에 결합함으로써 구현되어 진다. 이 과정에서 강체와 유연체 사이의 조인트나 힘 요소 등의 효율적 처리를 위해 가상 바디와 유연체 조인트 개념이 사용된다.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.778-784
• /
• 2011

This paper presents the study on orientations interpolation of 6-axis articulated robot using quaternion. In this paper, we propose a control algorithm between given two orientations of 6-axis articulated robot by using a quaternion with spherical linear interpolation. In order to study the quaternion interpolation, We created Inverse kinematics program and Interpolation program using LabVIE$^{(R)}$. The rotation angle of each axis were calculated using both euler orientations interpolation program and quaternion orientations interpolation program. The proposed control algorithm is shown to be effective in terms of motor angles and torques when compared to a conventional Euler angle interpolation, by using both LabVIEW$^{(R)}$ and RecurDyn$^{(R)}$.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.109-115
• /
• 2019

In arc-welding applying to the present automobile part manufacturing process, a wrist-hollow type arc welding robot can shorten the welding cycle time, because feedability of a welding wire is not affected by a robot posture and thus facilitates high-quality arc welding, based on stable feeding with no entanglement. In this paper, we will propose the optimization of wrist design for a wrist-hollow type 6-Axis articulated robot. Specifically, we will perform the investigation on the optimized design of inner diameter of hollow arms (Axis 4 and Axis 6) and width of the upper arm by using the simulation of robot motion characteristics, using a Genetic Algorithm (i.e., GA). Our simulations are based on $SolidWorks^{(R)}$ for robot modeling, $MATLAB^{(R)}$ for GA optimization, and $RecurDyn^{(R)}$ for analyzing dynamic characteristics of a robot. Especially $RecurDyn^{(R)}$ is incorporated in the GA module of $MATLAB^{(R)}$ for the optimization process. The results of the simulations will be verified by using $RecurDyn^{(R)}$ to show that the driving torque of each axis of the writs-hollow 6-axis robot with the optimized wrist design should be smaller than the rated output torque of each joint servomotor. Our paper will be a guide for improving the wrist-hollow design by optimizing the wrist shape at a detail design stage when the driving torque of each joint for the wrist-hollow 6-axis robot (to being developed) is not matched with the servomotor specifications.

• 대한기계학회논문집B
• /
• 제35권11호
• /
• pp.1243-1248
• /
• 2011

본 연구에서는 한국인 표준체형과 유사한 사람의 의료 영상 자료를 이용하여 인체 골격계 모델을 만들었다. 이를 동역학 해석 상용 소프웨트어인 $RecurDyn^{TM}$에 탑재시켜 인체 시뮬레이션 모듈을 개발하였고, 노인의 보행 동작해석을 통해 모델을 검증하여 보행기(elderly walker) 사용 유무에 따른 앉기-서기 및 보행을 분석하였다. 노인이 보행기를 사용하였을 때 앉기-서기 동작 시 하지관절 기구학의 변화는 미비하였고, 보행 시 각 관절의 가동범위가 조금 줄었고 동작시간이 상당히 길어졌다. 또한 근전도 해석결과 일부 발목 주변 근육들과 햄스트링 근육에서 근활성치가 줄거나 활성시간이 줄었다. 이러한 변화는 보행기를 통해 보행할 때 하지의 기여도가 감소했기 때문이라고 생각되었다. 본 연구를 통해 얻어진 시뮬레이션 기술은 여러 가지의 생체역학 연구에 널리 활용될 것으로 생각된다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권2호
• /
• pp.89-96
• /
• 2015

Based on multi-body dynamic software RecurDyn, this paper proposes a modified form of timing silent chain system combing with the existing problem that vibration and chain tension is too large, which is applied for complicated conditions in a V-type engine, such as high speed, variable loads. The analysis of chain drive meshing characteristics is completed. Using the multi-body dynamic soft-ware RecurDyn, the dynamics characteristics of the improved system is studied, including chain tension, transmission error, chain fluctuations, equivalent spring force in different operating conditions. The study results show that chain tension, transmission error, chain fluctuation and equivalent spring force are within the scope of permission, all of them can meet the design requirement. There-fore, the design of this system is reasonable and practicable. The research results will provide a basis for assessing timing silent chain system in a V-type engine and a theoretical reference for designing and optimizing the timing silent chain system.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.103-111
• /
• 2008

This study proposes a technique to estimate the material property of a paper by using an experimental methods and commercial CAE software. Under gravitation, if one side of the paper is attached to the ground, the opposite side of paper is largely deformed, and vibrates freely. Since the paper has an orthotropic characteristic due to its treatment, the deformations in two orthogonal directions of the dry paper are different. An experimental method to measure the static deformation of the paper introduces this phenomenon. And dynamic behavior, frequency of free vibration is measured. And then. virtual prototypes that can represent the static and dynamic behavior are modeled by using the commercial CAE software $RecurDyn^{MT}$/MTT3D, which has been widely used by the printer makers. While comparing the deformation and frequency from the experiment and simulation, a design optimization technique in the commercial CAE software of R-INOPL, $RecurDyn^{TM}$/AutoDesign is used to estimate the material property such as Young's modulus, shear modulus and density of the paper.

• 한국기계가공학회지
• /
• 제16권6호
• /
• pp.55-62
• /
• 2017

This paper aims to realize additional axes, which increase the processing efficiency of a robot by controlling in harmful environments. Ultimately, this is to create time and energy savings in industrial sites with 6-axis articulated welding robots (RS2). Using $RecurDyn^{(R)}$ a simulation technique is applied. The motion paths of the welding rod are compared for two cases in order to verify the necessity of the additional axes: 1) when there are no additional axes and 2) when there are additional axes during welding using the RS2. For this purpose, the angle variations of the RS2 axes required for the simulation are compared, on the assumption that each of the four points of the welding bed installed on the additional axes of the welding rod in $Solidworks^{(R)}$ is point-welded. Then, actual additional axes equipment is grafted on to the RS2 and the process times compared using $LabVIEW^{(R)}$.