• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.600-608
• /
• 2003

This Paper describes a detailed experimental investigation of heat transfer in a reciprocating smooth rectangular duct having only the bottom wall heated with reference to the design of a piston for a marine propulsive diesel engine The Parametric test matrix involves Reynolds number and reciprocating radius, respectively, in the range of 1.280∼4.100, and 7∼15 cm with five different reciprocating frequency tested. namely. 1.7, 2.2, and 2.6 Hz. The effects of three different hemi-triangular wavy type tapers on the heat transfer in the reciprocating rectangular channel using the air as a working fluid were check out. The present work confirms that the Nusselt number in the channel with the triangular wavy type taper is lower than without the triangular wavy type taper.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.383-386
• /
• 2003

This paper deals with transmission loss of 3-dimensional rectangular plenum lined chamber. There are three kinds of rectangular plenum lined chamber: throughflow type, flow-reversal type, and end-in/side-out type. The combination of above three types of rectangular plenum lined chamber is used for the commercial HVAC system and automobile exhaust system. However, the ambiguity and complexity of sound absorbing material property and 3-dimensional property have impeded research. In this paper, the transmission loss of three kinds of rectangular plenum lined chamber is derived and calculated. The effect of increase of sound absorbing material is also considered. Analytical solution is calculated by using the locally-reacting property of sound absorbing material.

• Nonlinear Functional Analysis and Applications
• /
• 제28권4호
• /
• pp.1097-1113
• /
• 2023

In this paper, we extend some fixed point theorems in rectangular b-metric spaces using subadditive altering distance and establishing the existence and uniqueness of fixed point for Hardy-Roger type mappings. Our result generalizes many known results in fixed point theory. Finally, we offer a example to illustrate our result.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권6호
• /
• pp.264-269
• /
• 2005

The electrostatic comb drive actuator is one of the main building blocks in the field of micro electro-mechanical systems (MEMS). Most of the comb actuators presented previously have fingers that are rectangular in shape which produce a stable, constant force output during actuation. The use of sawtooth fixed fingers in a comb drive, which were presumed to produce an increasing force output with displacement due to the increased number of regions where fringing force, the driving force of comb actuators, appear. The dimensions of the sawtooth were derived from finite element analysis (FEA) of simplified finger models with sawtooth type fingers of various dimension and were compared to the rectangular finger model that showed that the sawtooth type fingers have $7\~9$ times stronger driving force. Finally, comb drive actuators with sawtooth type and rectangular fingers were fabricated and although the gap was bigger, the comb actuator with sawtooth type fingers showed about 1.7 times greater electrostatic force than the one with rectangular fingers at equal driving voltages. In conclusion, using the proposed sawtooth type comb fingers in a comb drive makes it possible to increase its displacement or reduce the driving voltage.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.55-61
• /
• 1998

The purpose of this study is to compare the predictive behaviors of the extended $k-{\varepsilon}$ turbulence model and the standard $k-{\varepsilon}$ turbulence model. Grid dependency is tested with the H-type grid and the O-type grid. Computations have been performed for a circular-to-rectangular transition duct. Numerical results for several sections along the streamwise have been obtained to compare with experimental results. The Reynolds number is 390,000 based on the bulk velocity at the inlet. The computed axial velocity contours, transverse velocity profiles, static pressure contours, peripheral skin friction coefficient, and peripheral wall static pressure distributions have been compared with experimental results. The computed results obtained with the extended $k-{\varepsilon}$ turbulence model show better agreement with experimental results than those obtained with the standard $k-{\varepsilon}$ turbulence model. Comparing to the computed results obtained with the H-type grid and O-type grid, those with H-type grid agree well with experimental results.

• 한국전산유체공학회지
• /
• 제3권2호
• /
• pp.9-16
• /
• 1998

Predictive behaviors by the extended k-${\varepsilon}$ turbulence model and the standard k-${\varepsilon}$ turbulence model are compared. Grid dependency is tested with the H-type grid as well as the O-type grid. Computations have been performed on a circular-to-rectangular transition duct. The Reynolds number is 390,000 based on the bulk velocity at the inlet. The computed axial velocity contours, transverse velocity profiles, static pressure contours, peripheral skin friction coefficient, peripheral wall static pressure distributions and turbulence kinetic energy have been compared with experimental results. The computed results than those obtained with the standard k-${\varepsilon}$ turbulence model. Comparing to the computed results obtained with the H-type grid and O-type grid, those with H-type grid seem to agree well with experimental results.

• 상하수도학회지
• /
• 제27권5호
• /
• pp.561-570
• /
• 2013

There are two types of rectangular secondary clarifier at biological nutrient removal (BNR) facility to settle MLSS; conventional activated sludge secondary clarifier and Gould Type I clarifier. In this study, the performances of two types at respective biological nutrient removal facility are compared using weekly operational data. Surface Overflow Rate (SOR), Surface Loading Rate (SLR), Sludge Volume Index (SVI), secondary effluent SS concentration are studied. It has found that Gould Type I has 3.5 times less average secondary effluent SS concentration that is 2.4 mg/L than that of conventional activated sludge secondary clarifier. Both SOR and SLR have shown little effect on secondary effluent SS concentrations at Gould Type I clarifier in contrary that SOR affects the secondary effluent SS concentrations at conventional activated sludge rectangular secondary clarifier. From this study, it is recommended that Gould Type I must be considered for secondary clarifier when BNR plant is designed.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제30권2호
• /
• pp.169-190
• /
• 2023

In this paper, we introduce an extension of rectangular metric spaces called controlled rectangular metric spaces, by changing the rectangular inequality in the definition of a metric space. We also establish some fixed point theorems for self-mappings defined on such spaces. Our main results extends and improves many results existing in the literature. Moreover, an illustrative example is presented to support the obtained results.

• 한국광학회지
• /
• 제17권6호
• /
• pp.519-524
• /
• 2006

일반적으로 Lohmann형 이진 홀로그램에서 홀로그램의 진폭과 위상을 표현할 때 사각 셀이 이용된다. 본 논문에서는 기존의 사각 셀 대신에 원형 셀을 이용하여 진폭과 위상을 표현하는 방법을 시도하였으며, 기존의 사각 셀과 본 논문에서 사용한 원형 셀을 이용하여 구현된 컴퓨터 형성 홀로그램(CCH)의 특성을 비교하기 위하여 컴퓨터 실험과 광학적 실험 데이터를 토대로 재생된 결과를 비교 분석하였다. 실험 결과 원형 셀을 여러 픽셀로 나눌 경우 보다 뚜렷한 재생상을 얻을 수 있었으며, 원형 셀이 사각 셀 보다 균일할 재생상을 얻는 측면에서는 다소 차이가 있었으나 재생시에 원형 셀이 사각 셀 보다 더욱 밝은 재생상을 얻을 수 있었다.

• 수산해양기술연구
• /
• 제58권2호
• /
• pp.95-105
• /
• 2022

In this study, the fishery status of the octopus pot fishery in the east coastal sea were investigated, and the fishing performance of each pot shape was compared and analyzed. The fishery status survey was conducted through listening surveys at Jukbyeon Port, Uljin Port and Pohang Daebo Port in Gyeongbuk Province, and the amount of fishing gear used, fishing method, size and loss of octopus pot fishery was investigated. On the east coastal sea, octopus is one of the commercially important fish stocks and is caught in inshore pots, inshore combos, inshore gillnets and offshore pots. Among these fishing methods, pot fishing yields the highest catch. The shape of the pot differs depending on the region. In Uljin (Jukbyeon Port and Hupo Port), Gyeongbuk, rectangular type net pots are mainly used, and in Pohang (Daebo Port) in Gyeongbuk, drum-type pots are mostly used. Enteroctopus dofleini accounts for more than 90% of the catch of octopus. For the octopus fishing performance test by trap type, three types of traps (rectangular pot, drum pot and cylinder pot) were used on the coastal sea of Pohang Daebo. As a result, the total catch by pot shape was shown in the order of rectangular-type pot > drum-type pot > cylinder-type pot. The catch of octopus, the target species, was in the following order: rectangular-type pot > drum-type pot > cylinder-type pot. Such result shows a significant difference (Mann-Whitney test, p<0.05).