Purpose: To evaluate the results of treatments by percutaneous Acutrak screw fixation for intra-articular tongue type fracture of calcaneus, especially in elderly patient or patients with underlying disease including diabetes mellitus. Materials and Methods: Seven cases with intra-articular tongue type fracture of calcaneus, from November 2003 to February 2005, were reviewed. There were 6 males and 1 female with 65 years old mean age (range: $61{\sim}71$ years old). The average follow-up period was 16 months (range: $10{\sim}25$ months). Two Steinmann pins were used for closed reduction. After closed reduction was done like Essex-Lopresti's method, two Acutrak screws were inserted. The third Acutrak screw was inserted at the sustentaculum tali away from sinus tarsi to fix the primary fracture line. The patients were evaluated with Salama scale, the extent of recovery of Bohler angle, state of subtalar joint. Results: Clinical results according Salama scale were excellent in 5 cases, and good in 2 cases. Average preoperative Bohler angle was $13^{\circ}$ (range: $12{\sim}15^{\circ}$). Average postoperative Bohler angle was 31o (range: $23^{\circ}-40^{\circ}$). There were no soft tissue complications. There were two mild subtalar arthritis. Conclusions: We think that percutaneous Acutrak screw fixation is a good option for tongue type fracture of calcaneus in elderly patient or patients with underlying disease including diabetes mellitus.
In the patients with hemiplegia caused by stroke and TBI. postural sway is increased and open displaced laterally over the non-affected leg, reflecting asymmetry in weight bearing on lower extremities during standing balance. Recovery of symmetric weight bearing and postural stability is an important aim in physical therapy. Plastic AFO has been used for hemiplegic patients in order to help their abnormal walking patterns. Past studies have mainly focused on the AFO influences on hemiplegic walking patterns without balance function approaches. The purpose of this study was to identify the immediate effects of plastic AFO and shoes on the static balance in hemiplegic patients. The scale for static balance were weight bearing on affected leg(%), sway area(mm2), sway path(mm), maximal sway velocity(mm/s), anteroposterior sway angle($^{\circ}$ ), and lateral angle($^{\circ}$ ). Seventeen hemiplegic patients participated in this study: 13 men and 4 women, with an average age of 50.18 years. Static balance was measured using BPM(balance performance monitor; dataprint software version 5.3) under four standing condition namely bare-foot standing. standing in shoes, standing with AFO, and standing in shoes with AFO. In order to assure the statistical significance of the results, an one-way ANOVA, the independent t-test. and a pearson's correlation were applied at the .05 level of significant. The results of this study were as follows: 1) There were statistically significant differences in weight bearing(%) on the static balance between affected leg and non-affected leg(p<.01). 2) There were statistically significant differences in sway reverse frequence(Hz) in standing with AFO between affected leg and non-affected leg(p<.05). 3) Sway area(mm2) on standing in shoes with AFO was lower than bare-foot standing(p<.05), Lateral sway angle($^{\circ}$ ) on standing in shoes with AFO was lower than bare-foot standing and standing in shoes(p<.05). 4) Weight bearing in affected leg was not significantly correlated with postural sway.
Kim, Kyang-Yul;Park, Young-Il;Yim, Moon-Sup;Yoon, Sung-Hwan
Journal of Korean Foot and Ankle Society
/
v.12
no.2
/
pp.168-173
/
2008
Purpose: To evaluate the results of treatments by percutaneous Acutrak screw fixation for intra-articular joint depression type fracture of calcaneus. Materials and Methods: Thirteen cases with intra-articular joint depression type fracture of calcaneus, from September 2004 to March 2006, were reviewed. There were 9 males and 4 females with 52.5 years old mean age (range: $31{\sim}74$ years old). The average follow-up period was 18 months (range: $8{\sim}32$ months). Steinmann pins and Freers were used for closed reduction. After closed reduction, Acutrak screws and K-wires were inserted. The patients were evaluated with Creighton-Nebraska health foundation assessment sheet for calcaneal fracture, the extent of recovery of Bohler angle, fragment size, and state of subtalar joint. Results: Clinical results according to Creighton-Nebraska health foundation assessment sheet for calcaneal fracture were excellent in 6 cases (46%), good in 4 cases (30%), fair in 2 cases (15%), and poor in 1 case (7%). Average preoperative Bohler angle was $7.6^{\circ}$ (range: $2^{\circ}{\sim}13^{\circ}$). Average postoperative Bohler angle was $24.4^{\circ}$ (range: $4^{\circ}{\sim}33^{\circ}$). There were no soft tissue complications. There were one mild subtalar arthritis and one moderate subtalar arthritis. Conclusion: We think that closed reduction and percutaneous Acutrak screw fixation with or without K-wire is a good option for joint depression type fracture of calcaneus.
Kang, K. C.;Kim, Y. J.;Ryou, Y. S.;Baek, Y.;Rhee, K. J.
Journal of Biosystems Engineering
/
v.25
no.6
/
pp.489-496
/
2000
This study was conducted in order to find an ideal working fluid kind and a proper filling amount in the heat pipe as well as an inclined angle of heat pipe when they are placed to recover exhaust gas heat in the hot air heater. Followings are the findings of this research. 1. Of the four different working fluids-gasoline kerosene distilled water and acetone-acetone filled heat pipe showed the best performance giving out more homogeneous temperature profile on the radiating part than the kerosene and gasoline heat pipe an carrying out heat transmitting function better than the distilled water heat pipe by 10~2$0^{\circ}C$ higher on the radiating part. Acetone would be a good choice for recycling of exhaust gas heat in the hot air heater. 2. Of the filling amount of working fluid inside the heat pipes dry-out situations possible caused by insufficient filling were found in the filling amount of 5, 7.5 and 10% heat pipes as heat supply rate increases gradually in the range of 50 to 15kJ/sec. but no dry-out and stabilized heat transmitting performance occurred in the heat pipes of 12.5 and 15% filling at the same heat supply rate. It recommends that filling amount shall exceed 12.5% at least with the working fluids of this experiment. 3. The test revealed that the heat transmitting performance of heat pipe was more affected by filling amount rather than inclined angle.
Journal of the Society of Naval Architects of Korea
/
v.44
no.6
/
pp.551-563
/
2007
Numerical analysis for flow characteristics of a twin skeg container ship was carried out according to skeg vertical angles($0^{\circ}$, $10^{\circ}$, $20^{\circ}$) and skeg distances(16m, 20m, 24m) by using a commercial CFD code, FLUENT. Computed: pressure distributions, wake distributions and resistance coefficients have been compared with experimental and WAVIS results carried out by MOERI. Flow characteristics from numerical analysis such as nominal wake fractions, wake distribution and directions of the transverse vectors give good agreement with WAVIS results, even though there are quantitative discrepancy comparing with experimental measurements at the propeller plane. It is found that the better resistance performance can be obtained with the increase of the skeg vertical angle and the decrease of the skeg distance, which are mainly caused by viscous pressure resistance due to the skeg form and pressure recovery around the skeg. In addition, a vertical angle of the skeg gives more effect to the resistance coefficient comparing with the skeg distance. On the basis of results of the present study, it shows that numerical analysis using the commercial code, FLUENT, is useful and efficient tool for the evaluation of the complex stern hull form with twin-skegs.
Reddy, K. Srinivasa;Murty, G.V. Ramana;Dasgupta, A.;Sharma, K.V.
International Journal of Fluid Machinery and Systems
/
v.3
no.1
/
pp.11-19
/
2010
The performance of the crossover system of a centrifugal compressor stage consisting of static components of $180^{\circ}$ U-bend, return channel vanes and exit ducting with a $90^{\circ}$ bend is investigated. This study is confined to the assessment of performance of the crossover system by varying the shape of the return channel vanes. For this purpose two different types of Return Channel Vanes (RCV1 and RCV2) were experimentally investigated. The performance of the crossover system is discussed in terms of total pressure loss coefficient, static pressure recovery coefficient and vane surface pressure distribution. The experimentation was carried out on a test setup in which static swirl vanes were used to simulate the flow at the exit of an actual centrifugal compressor impeller with a design flow coefficient of 0.053. The swirl vanes are connected to a mechanism with which the flow angle at the inlet of U-bend could be altered. The measurements were taken at five different operating conditions varying from 70% to 120% of design flow rate. On an overall assessment RCV1 is found to give better performance in comparison to RCV2 for different U-bend inlet flow angles. The performance of RCV2 was verified using numerical studies with the help of a CFD Code. Three dimensional sector models were used for simulating the flow through the crossover system. The turbulence was predicted with standard k-$\varepsilon$, 2-equation model. The iso-Mach contour plots on different planes and development of secondary flows were visualized through this study.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.47
no.3
/
pp.195-203
/
2019
Since the hypersonic intake is directly related to the overall performance of the engine, it is essential to analyze performance characteristics under various off-design conditions. In this paper, Busemann intake and conical intake with external compression were designed, and numerical simulations were performed at on/off-design conditions. Based on the results, the overall performance characteristics of two types of intake were analyzed in various Mach numbers and angle of attacks. The results showed that performance degradation of Busemann intake with truncation angle of 2 degrees was minimal. Also, the performance of Busemann intake was higher than external compression intake at various Mach numbers, however, the starting characteristics were significantly reduced with an angle of attack.
Journal of The Korean Society of Integrative Medicine
/
v.11
no.3
/
pp.195-204
/
2023
Purpose : This study applied general training (control group) or cranio-cervical flexor training (experimental group) using a pressure biofeedback unit along with general training for 4 weeks to secondary school teachers with moderate to severe neck pain and forward head posture. After that, we tried to compare the effects through differences in neck pain intensity (using numberical rating scale), functional performance (using neck disability index), and cranio-vertebral angle change. Methods : All 50 subjects were randomly assigned to either the "experimental group (n= 25)" or the "control group (n= 25)", and the measurements were evaluated in the same way before the intervention (baseline) and after the intervention (4 weeks). During the intervention period, the subject visited the physiotherapy center and made a reservation three times a week at a fixed time as much as possible, and each training session was thoroughly conducted under the 1:1 guidance of the therapist in charge so that the correct movement and number of times could be performed without compensatory action. Results : As a result of the homogeneity analysis on the general characteristics of the subjects, there were no significant differences between the groups in all variables (p>.05). Compared to the "control group", the "experimental group" showed significant improvement after intervention in all measured variables of neck pain intensity, functional performance, and cranial-vertebral angle (p<.05). Conclusion : For secondary school teachers with forward head accompanied by neck pain, cranio-cervical flexor training using a compression biofeedback unit is an excellent method to show superior pain reduction and functional performance improvement compared to general training alone. In addition, it can be presented as a more effective intervention method that can promote recovery of forward head posture, which is an essential element of the solution.
Rice whitening is performed by basically two different whitening actions known as abrasive and frictional. The former adopted in the emery stone abrasive type whiteners and the latter in the jet-air friction type. Comparative milling yields and whitening efficiencies between the whitening system consisting of jet-air friction type whiteners only and the system consisting of both abrasive- and jet-air friction-types have not yet been rigorously defined. This study was to examine the effect of combined operations of abrasive- and jet-air friction-type rice whiteners on milling yields and whitening efficiencies. The small capacity commercial units of the abrasive- and friction-type whiteners were used for the experiments. The combinations of whitening treatments were: 1) Once in the abrasive type and then two to three times in the friction type, 2) twice in the abrasive and then two to three times in the friction type and 3) three to five times in friction type. In these tests, counter pressures for the friction type whiteners were established differently as required to get about the same degree of whitening at the end of predetermined numbers of the repeated operations. The speed of emery stone and the slot angle of the screen were also the factors varied in the abrasive type whitener. Sheukwang rice variety having 13.05% M.C. was used in the tests. The dependent variables were the milled- and head-rice recoveries and electricity consumption. The results of the study are summarized as follows: 1. It was found that in the whitening systems consisting of abrasive- and friction-type whiteners slot angle of the screen, the rotational speed of emery stone roller had significant effect on the milling yields and whitening efficiency. In general, the increase of the emery stone roller speed from 690 to 950 rpm presented a positive effect on milling yield, and one-pass abrasive milling combinations had higher milling yields than two-pass abrasive milling combinations. 2. It was apparent that if the slot angle of the screen and the speed of emery stone roller are modified and set at an optimum level, the combination whitening system consisting of abrasive- and friction-type whiteners is better than the pure frictional whitening system consisting of jet-air friction type in terms of milling yields and efficiencies. 3. In the rice whitening system consisting of abrasive- and jet-air friction-type whiteners, the best whitening performance was obtained when the slot angle of the screen and the rotational speed of emery stone roller were $45^{\circ}$ and 950rpm, respectively, for the one-pass abrasive milling combinations. However, for the two-pass abrasive mi11ing combinations, the best performance was obtained with $75^{\circ}$ of slot angle and 950 rpm of the emery stone roller speed. 4. As compared with pure frictional whitening systems, the combination systems produced more milled rice by 0.8-1.0% point and more head rice by 0.5-1.5% point, and consumed less electricity by 0.15-0.20 KwH per 100kg of milled rice when the abrasive whiteners were operated in the modified conditions as described in item 3 above. Further study is recommended to find out optimum operational and design conditions of abrasive type whiterners.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2008.10a
/
pp.245-248
/
2008
This paper deals with the parameter study of roller leveling process of steel cord using finite element analysis. A simplified model of roller leveling process is constructed for the efficient numerical simulation considering the computing time. Using the constructed simulation scheme, the parameter study of main process parameters, such as back-tension and intermesh, is carried out in order to evaluate elastic recovery angle and roller force quantitatively. The effect of the initial shape of steel cord is also evaluated during the parameter study. And the mechanism of roller leveling process is verified by investigating the residual stress distribution.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.