• Journal of Chest Surgery
• /
• v.25 no.11
• /
• pp.1203-1208
• /
• 1992

Current methods of myocardial protection has been improved with cardioplegia and hypothermia. We compared St. Thomas hospital cardiopleic solution without oxygenation[Group I], with oxygenation[Group II] and with oxygenation with filter[Group III] under isolated working heart model. Heart rate recovery was more significantly improved in Group II than Group I after 15 minutes of recovery time [p<0.05]. Maximal systolic pressure shows no difference as it increases with time. Cardiac ouputs were not diffrent between groups. Recovery time was shorter significantly in group II and group III than group I [p<0.05] Use of filter showed no difference. As a conclusion, oxygenated cardioplegic solutions improves ability to protect the heart against ischemia and it is manifested by improved recovery time and heart rate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.216-221
• /
• 2006

Lifetime control technique by proton implantation has become an useful tool for production of modern power devices. In this work, punch-through type diodes were irradiated with protons for the high speed power diode fabrication. Proton irradiation which was capable of controlling carrier's lifetime locally was carried out at the various energy and dose conditions. Characterization of the device was performed by current-voltage, capacitance-voltage and reverse recovery time measurement. We obtained enhanced reverse recovery time characteristics which was about $45\;\%$ of original device reverse recovery time and about $73\;\%$ of electron irradiated device reverse recovery time. The measurement results showed that proton irradiation technique was able to effectively reduce minority carrier lifetime without degrading the other characteristics.

• Korean Journal of Optics and Photonics
• /
• v.29 no.1
• /
• pp.32-39
• /
• 2018

The impact of the amplified spontaneous emission (ASE) on the gain recovery time of a bulk semiconductor optical amplifier (SOA) is investigated. The gain-recovery time is obtained by determining the time evolution of the gain, carrier density, and ASE in an SOA, after the propagation of a short pump pulse and continuous-wave (CW) probe of gain dynamics. In the simulation, a wide-band-semiconductor model, which can be characterized by the material gain coefficient over a wide wavelength range, is used, because the gain bandwidth of a practical SOA is very wide. The pump pulse and counterpropagating CW probe field are considered in the simulation, with the ASE noise spectrum equally divided.

• 한국방재학회:학술대회논문집
• /
• 2009.02b
• /
• pp.26-35
• /
• 2009

Efficient recovery assistance for individual households is one of the inevitable issues in management after a disaster. Discussion on how the assistance should be provided to them, however, has been put aside whereas amount or contents of it have been disputed every time a disaster happens. Public support system in a time of disaster in Japan is very complicated because many laws are related to recovery support and each law covers just a part of total recovery needs of affected household. It is difficult to see whole picture of the system for affected households. Therefore, households must have many interactions with various sections in charge of particular assistance service to know the contents of each assistance and requirements to receive it to decide combination of supports they use. It is crucial for efficient recovery assistance operation to manage those customer relations since considerable part of troubles in individual recovery came from failure in each interactions caused by lack of common understanding on each recovery process between them. In this paper, I want to introduce how support system in Japan is fragmented, a case of Anamizu town which adopted a customer-oriented framework of information management system for their assistance operation after Mar. 2007 Noto peninsula earthquake and what was learned from the case.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.26-29
• /
• 2012

Recently, to efficiently support the real-time requirements of RTLS( Real Time Location System) services, interest in the main memory DBMS is rising. In the main memory DBMS, because all data can be lost when the system failure happens, the recovery method is very important for the stability of the database. Especially, disk I/O in executing the log and the checkpoint becomes the bottleneck of letting down the total system performance. Therefore, it is urgently necessary to research about the recovery method to reduce disk I/O in the main memory DBMS. Therefore, In this paper, we analyzed existing log techniques and check point techniques and existing main memory DBMSs' recovery techniques for recovery techniques research for main memory DBMS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.371-376
• /
• 2010

In this paper, we propose a new fast carrier recovery algorithm for high-order QAM systems. The proposed algorithm detects carrier frequency offset from the phase differences among the received symbols directly and combines it with the conventional carrier recovery, so that it is possible to achieve the carrier recovery with wide tracking range and fast acquisition time. Simulation results show that the proposed carrier recovery method reduces acquisition time at large frequency offset and low signal-to-noise ratio (SNR).

• Journal of the Korean Home Economics Association
• /
• v.25 no.1
• /
• pp.11-18
• /
• 1987

The purpose of this study was to investigate the crease recovery and the elastic recovery as a function of the direction of plain woven fabrics. The crease recovery was measured by Mosanto's Method and the elastic recovery was investigated by Autograph for ten kinds of plain woven fabric samples. The results were as follows; 1. Values of crease recovery were in the order of bias>weft>warp. 2. The lengthening of recovery time had a little effect on crease recovery. 3. The directions of crease recovery were affected by that of thread twist. 4. The linearity was shown between total crease recovery and warp-weft crease recovery. 5. The linearity was found between crease recovery and elastic recovery in the fabrics.

• Journal of Korean Academy of Nursing Administration
• /
• v.12 no.1
• /
• pp.63-75
• /
• 2006

Purpose: This study was aimed to specify roles of nurses from the anesthesia and recovery room by analyzing nursing activities as well as anesthesia nursing during surgery. Method: The objects were 12 RNs working in the recovery room of a university hospital located in Incheon. Self-report was performed by measuring stop-watch for five days from May 17th to May 21st in 2004. Research method was designed to record the time and frequency of the nursing activity from anesthesia and recovery room based on nurses' statement and other references for five days. The data were analyzed with descriptive statistics, ANOVA, and t-test via SPSS Win 10.0 program. Result: Nursing activities in anesthesia recovery room were classified into two different characteristics such as direct and indirect nursing activity. The activities consisted of 11 direct nursing areas and 39 nursing activities in anesthesia preparation room. The indirect nursing was classified into 8 nursing areas and 32 nursing activities. The direct nursing was classified into 12 nursing areas and 55 nursing activity. Also, the indirect nursing was classified into 7 nursing areas and 21 nursing activities in recovery room. In terms of prevalence of nursing activities in the anesthesia preparation room, observation and cooperation of anesthesia was the most prevalent activity, drug and eqipment management the second prevalent, and drug administration the third. On the other hand, in the recovery room, the most prevalent activity was vital sign checking and observation, the second most prevalent activity informative activity, and the third body temperature control. Nursing activity time was recorded according to the nursing characteristics. In the anesthesia preparation room, the direct nursing spent for 8092.20 minutes was larger than the indirect nursing spent for 7198.50 minutes. Also, in the recovery room, the direct nursing spent for 2361.16 minutes was larger than the indirect nursing spent for 1134.13 minutes. 4. Nursing activity time was compared to duty shifts. In the anesthesia preparation room, the direct nursing was more prevalent on day shift and the indirect nursing was prevalent on evening shift. However, in the recovery room, both direct and indirect nursing activities were prevalent on day shift. Conclusion: The role of anesthesia and recovery room nurses was analysed according to the time, frequency, and its characteristics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.6
• /
• pp.653-657
• /
• 2011

The efficiency of clove oil, MS-222, and 2-phenoxyethanol was evaluated as anesthetics in juvenile Scomber japonicus. Stage A5 of anesthesia was assumed to be sufficient for conducting routine aquaculture procedures in less than 3 min, with recovery (stage R5) in less than 5 min. The lowest effective doses of the three anesthetics were 50 mg $L^{-1}$ clove oil (anesthetic time of 71.3 s and recovery time of 167.0 s), 100 mg $L^{-1}$ MS-222 (anesthetic time of 70.7 s and recovery time of 115.7 s), and 400 mg $L^{-1}$ 2-phenoxyethanol (anesthetic time of 86.7 s and recovery time of 95.0 s). Anesthetic times decreased with increasing doses for all three anesthetic agents, and fish anesthetized with clove oil exhibited the longest recovery times. After 30 min, the highest plasma cortisol and lactate levels were detected with the use of clove oil, whereas the lowest values were observed with 2-phenoxyethanol. In addition, high glucose levels were maintained during recovery with clove oil, but the treatments did not significantly differ. The most effective of the three anesthetic agents was 2-phenoxyethanol, although all were considered acceptable for use in cultures of juvenile Scomber japonicus.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.13 no.5
• /
• pp.235-243
• /
• 2018

NAND flash memory has been widely used for embedded systems as storage device and the flash memory file systems such as JFFS2, YAFFS/YAFFS2 have been adopted by these embedded systems. The flash memory file systems provide the high performance and overcome the limitations of flash memory. However, these file systems don't solve the slow mount time problem when a sudden power failure happens. In this paper, we proposed a flash memory management method for enhancing the recovery performance. The proposed method manages the flash memory block type and stores the block type information at recovery image block. When file operations are occurred, our method stores the file information at the metadata block before and after the file operation. When mounting the flash memory, our method only scans the recovery image blocks and metadata blocks. The proposed method reduces the mount time by seeking the metadata block locations fast by using the recovery image blocks. We implemented the proposed method and evaluation results show that our method reduces the mount time 13 ~ 46 % compared with YAFFS2.