• 제목/요약/키워드: Recovery Log

검색결과 123건 처리시간 0.027초

NAND 플래시 파일 시스템의 빠른 복구를 위한 로그 구조 설계 (Design of a Log Structure for Fast Recovery of a File System on NAND Flash Memory)

  • 김태훈;이주경;정기동
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (1)
    • /
    • pp.784-786
    • /
    • 2005
  • 본 논문에서는 기존의 플래시 파일 시스템과 차별되는 빠른 복구를 위한 로그 구조를 제안한다. 로그와 메타데이터를 플래시 메모리의 특정 영역에 기록하고, 오류가 발생하게 되면 복구단계에서 이 영역만을 스캔하기 때문에 파일 시스템의 오버헤드를 줄인다. 그리고 로깅연산은 트랜잭션으로 관리되어 다른 연산에 간섭받지 않고 독립적으로 수행이 되므로 동시성을 높이고 로깅에 따른 오버헤드가 크지 않다. 따라서 로깅과 복구에 필요한 시간을 최소화하여 신뢰성 있는 파일 시스템 구성이 가능하다.

  • PDF

일본 가가와현 산불피해지의 복구대책 (The Restoration of Forest Fire Area in Kagawa Prefecture, Japan)

  • 전근우;이시영;임영협;탄원등지자;강기차부
    • 한국방재학회:학술대회논문집
    • /
    • 한국방재학회 2007년도 정기총회 및 학술발표대회
    • /
    • pp.238-241
    • /
    • 2007
  • The forest seemed apparently to die on the forest fire area in Honjima, Kagawa Prefecture, Japan. However, the soil that became growing basic of vegetation hardly suffered damage, and the forest recovery was started by the sprout, etc. in the next year. For restoration of forest fire area, the fascine mulching works and log barrier works using the damaged trees were used for the upper-stream, and chack dam and erosion control dam were set up in the downstream. Also, the forest restoration was tried with the plants and the microorganism that inhabit in Honjima to preserve a peculiar forest ecosystem.

  • PDF

클라이언트/서버 환경에서 클라이언트 기반 로깅을 이용한 회복 기법 (A Recovery Technique Using Client-based Logging in Client/Server Environment)

  • 박용문;이찬섭;김희수;최의인
    • 한국정보처리학회논문지
    • /
    • 제7권8S호
    • /
    • pp.2735-2747
    • /
    • 2000
  • 클라이언트/서버 데이터베이스 시스템에서 로깅 기법을 사용하는 기존 회복 기법은 서버에서만 전체 로그를 관리한다. 이는 잠재적으로 각 클라이언트에서 수행되는 트랜잭션에 대한 로그 레코드의 전송 비용을 내포하고 있고, 네트워크 트래픽을 증가시킨다. 본 논문에서는 로그 레코드의 전송 비용을 제거하기 위해서 클라이언트 기반 로깅(client-based logging)을 지원하고, 중복된 before-image를 제거하고 재수행 전용 로그(redo-only log)만을 로깅하는 방법을 제안한다. 그리고 클라이언트 파손 시 클라이언트에서 자치적으로 한번의 후방향 클라이언트 로그 분석을 이용한 재수행 회복을 하고, 서버 파손 시 각 클라이언트에서는 병행적으로 후방향 클라이언트 로그 분석을 이용하여 회복해야 하는 페이지의 after-image만을 서버에 전송하며, 서버에서는 수신된 after-image와 후방향 서버 로그 분석을 이용하여 재수행 회복을 수행한다.

  • PDF

자기부상 시스템의 본드선도 모델링 및 LQG/LTR 제어기 설계 (Bond Graph Modeling and LQG/LTR Controller Design of Magnetically Levitation Systems)

  • 김종식;박전수
    • 대한기계학회논문집
    • /
    • 제15권5호
    • /
    • pp.1620-1634
    • /
    • 1991
  • 본 연구에서는 전기/자기 및 기계적 요소들이 복합되어 이루어진 자기부상 시 스템의 설현을 위한 기초단계로서 제어동역학(controlled dynamics) 측면에 입각한 모 델식을 본드선도 기법을 이용하여 보다 조직적으로 유도한다. 우선, 자속흐름 확장 및 자속 유출량을 고려하여 부상 시스템을 모델링하고 차량/레일 및 2차 현가(second ary suspension)장치를 포함한 자기부상 시스템을 모델링한다. 다음, 지지 및 안내 방향의 동역학을 동시에 고려한 2차원 자기부상 시스템을 본드선도의 다접점 필드(mu- ltiport field) 개념을 이용하여 모델링한다. 끝으로, 본드선도 기법으로 모델링된 2차원 자기부상 시스템의 안정도와 성능을 향상시키기 위하여 LOG/LTR(linear quadra- tic Gaussian control with loop transfer recovery) 제어시스템을 설계한다. LQG/ LTR 제어방법은 Doyle과 Stein에 의해 인성(stability-robustness) 문제와 주파수역 성능을 설계시에 직접 고려할 수 있는 강력한 선형 다변수 제어시스템 설곕방법으로 현재 널리 사용되고 있다.

비공유 공간 데이터베이스 클러스터에서 확장성 해싱 기반의 로그를 이용한 회복 기법 (Recovery Method Using Extendable Hashing Based Log in A Shared-Nothing Spatial Database Cluster)

  • 장일국;장용일;박순영;배해영
    • 한국GIS학회:학술대회논문집
    • /
    • 한국GIS학회 2004년도 GIS/RS 공동 춘계학술대회 논문집
    • /
    • pp.7-10
    • /
    • 2004
  • 회복기법은 비공유 공간 데이터베이스 클러스터에서 고가용성을 위해 매우 중요하게 고려되고 있다. 일반적으로 데이터베이스 클러스터의 회복기법은 노드의 오류가 발생한 경우 로컬 로그와는 별도로 클러스터 로그를 생성하며, 이를 기반으로 해당 노드에서의 회복과정을 수행한다. 그러나, 기존의 기법은 하나의 레코드를 위해 다수의 갱신정보를 유지함으로써 클러스터 로그의 크기가 증가되고, 전송비용이 증가된다. 이는 회복노드에서 하나의 레코드에 대해 털러 번의 불필요한 연산을 실행하여 회복시간이 증가되고, 전체적인 시스템의 부하를 증가시키는 문제를 발생시킨다. 본 논문에서는 비공유 공간 데이터베이스 클러스터에서 확장성 해싱 기반의 로그를 이용한 회복기법을 제안한다. 제안기법에서의 클러스터 로그는 레코드 키값을 이용한 확장성 해싱을 기반으로 레코드의 변경사항과 실제 데이터를 가리키는 포인터 정보로 구성된다. 확장성 해싱 기반의 클러스터 로그는 크기와 전송비용이 감소하며, 회복노드는 하나의 레코드에 대해 한번의 갱신연산만 실행하므로 빠른 회복이 가능하다. 따라서 제안 기법은 확장성 해싱 기반의 클러스터 로그를 이용하여 효율적인 회복처리를 수행하며, 시스템의 가용성을 향상시킨다.

  • PDF

An Efficient Monocular Depth Prediction Network Using Coordinate Attention and Feature Fusion

  • Huihui, Xu;Fei ,Li
    • Journal of Information Processing Systems
    • /
    • 제18권6호
    • /
    • pp.794-802
    • /
    • 2022
  • The recovery of reasonable depth information from different scenes is a popular topic in the field of computer vision. For generating depth maps with better details, we present an efficacious monocular depth prediction framework with coordinate attention and feature fusion. Specifically, the proposed framework contains attention, multi-scale and feature fusion modules. The attention module improves features based on coordinate attention to enhance the predicted effect, whereas the multi-scale module integrates useful low- and high-level contextual features with higher resolution. Moreover, we developed a feature fusion module to combine the heterogeneous features to generate high-quality depth outputs. We also designed a hybrid loss function that measures prediction errors from the perspective of depth and scale-invariant gradients, which contribute to preserving rich details. We conducted the experiments on public RGBD datasets, and the evaluation results show that the proposed scheme can considerably enhance the accuracy of depth prediction, achieving 0.051 for log10 and 0.992 for δ<1.253 on the NYUv2 dataset.

활성슬러지공정 하수종말처리장의 분원성 지표세균의 농도 및 비교 (Enumeration and Comparison of Fecal Indicator Bacteria in a Sewage Treatment Plant Using Activated Sludge Process)

  • 이동근;성기문;정미라;박성주
    • 한국환경보건학회지
    • /
    • 제36권2호
    • /
    • pp.141-147
    • /
    • 2010
  • Indicator bacteria of fecal pollution were enumerated and compared by various detection methods for influent and final effluent of a sewage treatment plant. Total coliforms were enumerated by four methods including most probable numbers, chromogenic enzyme substrate test, membrane filtration, and plate counts and were about $10^4$ for influent and $10^2{\sim}10^3\;CFU/ml$ for final effluent. Fecal coliforms ranged between $10^3$ and $10^4$ for influent and $10^2\;CFU/ml$ for effluent by chromogenic enzyme substrate test and membrane filtration. Fecal streptococci counts were 1-log less than fecal coliforms counts, $10^2{\sim}10^3$ for influent and $10^1\;CFU/ml$ for effluent. Total coliforms numbers by plate count both in influent and in effluent showed 1-log higher than by the other three methods. Statistical analysis revealed that numbers of total coliforms by plate count in final effluent had the highest average of correlation (r=0.778, p<0.01) compared with those by the other three methods. In addition, total coliforms numbers by plate count showed most significant correlation (r=0.835, p<0.01) with those by chromogenic test which is well-known as its highest recovery efficiency. These results suggest that the plate count would be the optimum detection method for total coliforms in wastewater treatment plants which are the only microbiological standard of final effluent from wastewater treatment plants in the Republic of Korea, considering economic aspects and difficulties in laboratories.

낙엽송 소경재(小徑材)의 제재이용구조(製材利用構造)에 관(關)한 연구(硏究) (A Study on Sawing and Utilization Structure of Lumber from Small - diameter Logs of Larix leptolepis)

  • 이춘택;김수창
    • Journal of the Korean Wood Science and Technology
    • /
    • 제18권3호
    • /
    • pp.53-68
    • /
    • 1990
  • This research has been executed for maximization of lumber yield and more efficient use of small diameter logs. Sample logs from thinnings carne from densed artificial stands at the Kwangnung Experimental Forests situated in the central region of Korean peninsula. Species of sample logs were obtained to execute sawing and strength test for larch, and lumber strength test in full size for pitch pine and Korean pine. A survey on sawmills consuming domestic logs was carried out to know sawmill production, costs and utilization structure of lumber as a guide to business analysis. Results showed that sawing pattern from small logs less than 15cm in diameter was necessary to cut 9cm by 9cm square per one log in order to obtain high lumber recovery and provide for wide market needs. The total lumber yield of squares plus side boards was 56 percent to 58 percent from small logs and the yield for log sweep in 30 percent decreased by 24.5 percent in sawing production, compared to yield for straight logs. In sawing efficiency, production of lumber by twin band saw could be improved 238 percent higher than lumber of the same species produced by conventional sawmilling methods, and sawing accuracy with twin band saw was much higher at the lumber production than band saw. Lumber from the small larch logs has shown 70 knots per $m^2$ on its faces and also lumber showed lots of face checkings by air drying on the yard, compared to other species. MOR in bending of lumber in full size from small logs of larch was found ranging from 380kg/$cm^2$ to 460kg/$cm^2$, resulting in 40 percent less than the strength from clear small specimens. In lumber containing knots, cross grain, etc, longitudinal stress wave speed was delayed about 48 percent by defects in lumber from both larch and pitch pine logs. The surveyed sample sawmills consumed the domestic logs at the rate of 54 percent to 84 percent in the total timber consumption, showing high consumption at mills located in the mountains.

  • PDF

HFL-I 세포의 잠재적 치사 손상 회복에 따른 세포 생존율 변화 (Change of Surviving Fractions based on the Recovery of Potentially Lethal Damage in HFL-I Cell Line)

  • 최은애
    • 한국방사선학회논문지
    • /
    • 제11권3호
    • /
    • pp.147-151
    • /
    • 2017
  • HFL-I 세포를 이용하여 immediate assay를 시행하였다. 발생한 repair의 양이 없기 때문에 $LogSn=-n{\gamma}({\alpha}d+{\beta}d^2$)에서 ${\gamma}$의 값은 1이며 이는 LQ model과 같다. 그리고 세포생존율의 데이터를 바탕으로 ${\alpha}$, ${\beta}$, ${\alpha}/{\beta}$의 값을 얻었다. 또한 12시간, 36시간, 48시간 후 delayed assay를 시행하여 marchese model 통해 ${\gamma}$값을 도출한 후 Pot entially lethal damage repair (PLDR)가 발생한 양을 확인하였다. delay time이 길어질수록 ${\gamma}$값은 감소함으로써 PLDR의 양이 증가함을 확인하였고 이에 따라 세포생존율은 상승됨을 보였다. 탄소빔의 1분할, 2분할, 3분할, 4분할 조사 시 각각의 interval 시간동안 나타나는 ${\gamma}$값 역시 감소하고 있음을 확인하여 PLDR의 발생을 확인할 수 있었지만 ${\gamma}$값만 감안한 marchese model을 surviving fraction값에 적용 시 오류 발생함을 보였다. 이는 탄소빔 분할조사 시 다른 회복의 매커니즘이 존재함을 뜻하여 이를 적용할 수 있는 새로운 파라미터가 고려되어져야 할 것이다.

Improvement of Virus Safety of an Antihemophilc Factor IX by Virus Filtration Process

  • Kim, In-Seop;Choi, Yong-Woon;Kang, Yong;Sung, Hark-Mo;Sohn, Ki-Whan;Kim, Yong-Sung
    • Journal of Microbiology and Biotechnology
    • /
    • 제18권7호
    • /
    • pp.1317-1325
    • /
    • 2008
  • Viral safety is an important prerequisite for clinical preparations of plasma-derived pharmaceuticals. One potential way to increase the safety of therapeutic biological products is the use of a virus-retentive filter. In order to increase the viral safety of human antihemophilic factor IX, particularly in regard to non-enveloped viruses, a virus removal process using a polyvinylidene fluoride membrane filter (Viresolve NFP) has been optimized. The most critical factor affecting the filtration efficiency was operating pH and the optimum pH was 6 or 7. Flow rate increased with increasing operating pressure and temperature. Recovery yield in the optimized production-scale process was 96%. No substantial changes were observed in the physical and biochemical characteristics of the filtered factor IX in comparison with those before filtration. A 47-mm disk membrane filter was used to simulate the process performance of the production-scale cartridges and to test if it could remove several experimental model viruses for human pathogenic viruses, including human hepatitis A virus (HAV), porcine parvovirus (PPV), murine encephalomyocarditis virus (EMCV), human immunodeficiency virus type 1 (HIV), bovine viral diarrhea virus (BVDV), and bovine herpes virus (BHV). Non-enveloped viruses (HAV, PPV, and EMCV) as well as enveloped viruses (HIV, BVDV, and BHV) were completely removed during filtration. The log reduction factors achieved were $\geq$6.12 for HAV, $\geq$4.28 for PPV, $\geq$5.33 for EMCV, $\geq$5.51 for HIV, $\geq$5.17 for BVDV, and $\geq$5.75 for BHV. These results indicate that the virus filtration process successfully improved the viral safety of factor IX.