• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.65-75
• /
• 1996

The probability distributio function (pdf) of transmitted symbols should be asymmectric for recovering the received data in the 3rd order blind equalizer system. In this paper, we hav edesigned the blind equalizer using symmetric-asymmetric (SA) and asymmetric-symmetric (AS) transforms for less computational complexities and robustness in the noisy environments. The method of SA and AS transform was peformed using natural logarithmic operation. This paper proves that the proposed in this paper can be performed as real time operation. This paper proves that the compression factor k has no effet on transmitted symbols. Also 3rd order equalization method proposed in this paper can be performed as real time operation. As a result of computer simulatio, the computational complexity of proposed algorithm is reduced to be an half of 4th order method and MSE is enhanced as 10dB at the case of 4-PAM and 15dB at the case of 8-PAM respectivley. Conclusively, we have found that 3rd order blind equalizer can be implemented when the pdf of transmitter is asymmetric.

• Journal of Industrial Technology
• /
• v.24 no.B
• /
• pp.207-214
• /
• 2004

An active stick which supplies force feedback to the operator is developed in this study. A mathematical model of the active stick is derived, and compared with the experimental result. It turns out that the frictional torque due to the mechanical contacts of several parts of the stick is one of the major barriers to achieve high precision operation of the stick. The frictional effect of the stick is cancelled out by using a friction observer. The efficacy of the friction observer is verified through the numerical simulation. Because of the observer dynamics, there are some limitations in exact recovering the static friction and Stribeck effect. However, the friction observer follows the real friction on the average. It's anticipated that the application of the friction observer to the closed loop control of the active stick improves the performance of the displacement versus force characteristics, which will be proved experimentally in the further study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.4
• /
• pp.39-49
• /
• 2006

LYNX ESM has not only ESM function but Datalink function. The LYNX boarded equipment Interface and Channel coding is needed for LYNX Datalink to support the mother ship with tactical data included threat radar analysis data of LYNX ESM, navigation data, Radar and Sonar of LYNX. The interface of loaded equipments are various protocol like as ARINC419/429, RS232, Synchro, Sync Serial. The Channel coding of Convolution-Scrambler-Interleaver-Bit Stuffing is applied for recovering the transmission data mixed with propagation errors in sea environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.591-592
• /
• 2010

The strong adjacent interference in the receiver channel may cause difficulties in recovering the signal and also it degrades the system performance very seriously. Therefore, in this paper, the cancellation method was investigated to minimize these interference effects. It was supposed that the strong transmission power was leaked into the receiver channel. the usual LMS algorithm was applied for cancellation. Weight coefficients for adaptation converged very fast within 10 micro seconds and it showed the cancellation capability of 50dB approximately.

• Structural Engineering and Mechanics
• /
• v.65 no.3
• /
• pp.251-261
• /
• 2018

Self-centering concentrically braced frames (SCCBFs) are emerging as high performance seismically resistant braced framing system, due to the capacity of withstanding strong earthquake attacks and promptly recovering after events. To get a further insight into the seismic performance of SCCBFs, systematical evaluations are currently conducted from the perspective of modal contributions. In this paper, the modal pushover analysis (MPA) approach is utilized to obtain the realistic seismic demands by summarizing the contribution of each single vibration mode. The MPA-based results are compared with the exact results from nonlinear response history analysis. The adopted SCCBFs originate from existing buckling-restrained braced frames (BRBF), which are also analyzed for purpose of comparison. In the analysis of these comparable framing systems, interested performance indices that closely relate to the structural damage degree include the interstory drift ratio, floor acceleration, and absorbed hysteretic energy. The study shows that the MPA approach produces acceptable predictions in comparison to the exact results for SCCBFs. In addition, the high-modes effect on the seismic behavior increases with the building height, and is more evident in the SCCBFs than the BRBFs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.746-751
• /
• 2002

This purpose of this study was to design the effect of recovering of a hand amputees by myoelectronic hand. It was designed with 2 degree of freedom in tile laboratory. Myoelectronic hand had only one degree of freedom and one movement until now. Also this myoelectronic hand had multi-joint system. Myoelectronic hand data was obtained by measuring hand and data was applied when it was designed myoelectronic hand. PID controll of myoelectronic hand was used to it. Displacement control was applied the first link of finger. Experiment was accomlkished in Tip grasp, power grasp and Hook grasp modes. Displacement controll was good in low frequency. Velocity control was applied to each mode. This myoelectronic hand with a hand amputees could do some jobs such as grasping materials. Further studies were needed to evaluate the effect of a myoelectronic hand with more precise laboratory equipment.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.4
• /
• pp.36-41
• /
• 2014

Most faults that occur on transmission lines are caused by extreme weather with lightning storms in the distance. These are not only prolongs the time of removing and recovering, but also increases economical damages. If faults can be precisely located, maintenance crews can reach them quickly, and remove the faults in time. So, the precise locating of the faulted point on a transmission line is very important to improve the system reliability, and decreases economic damages as an inherent consequence of long term outages. Also, fault location methods are becoming of much importance for utilities and research. In this paper, two single-terminal impedance-based fault location techniques will be investigated to show the reliability and evaluated the performance of reactance and Takagi method by using MATHCAD program simulations.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.376-381
• /
• 2007

GHP system utilize national gas as a heat source. It reduces electric peak demand in summer and maintains a constant performance in winter by recovering the waste heat from the engine. Although the initial investment cost of GHP is higher than that of EHP, the overall operating cost of GHP is cheaper than of the EHP. In this study, items for dissatisfaction were summarized based on the results of user questionnaire(200 users), and field tests were made for 10 GHP installation places. The measured COP was estimated much lower than the rated COP by the manufacturer mainly due to partial load operation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.04a
• /
• pp.166-173
• /
• 2002

Seismic bridge failure due to the combined effects of earthquake and local scour are examined in probabilistic perspectives. The seismic responses of multi-span continuous bridge with deep foundations are evaluated with a simplified mechanical model. The probabilistic local scour depths around the deep foundations are estimated by using the Monte Carlo simulation. From the simulation results, it is found that seismic responses of a bridge slightly increase due to the local scour effect. The effect of local scour on the global motion of the continuous bridge is found to be significant under weak seismic intensity. In addition, the duration to regain its original foundation stiffness is critical in estimating the probability of foundation failure under earthquake. Therefore, the duration in recovering the foundation stiffness should be determined reasonably and the safely of the whole bridge system should be evaluated by considering the scour effect.

• Journal of the military operations research society of Korea
• /
• v.28 no.1
• /
• pp.97-114
• /
• 2002

An estimation of economic life for a new weapon system is a critical issue in aquisition process. In general a life cycle cost consists of, development cost, aquisition cost, and maintenance cost. These costs are not identified and obtained in the beginning of the aquisition process. This paper deals with an economic life for KlAl tank which is being deployed recently, using PRICE model. In order to estimate an KlAl economic life, we use equivalent annual cost method which is sum of capital recovering with return and equivalent O&M cost method. This method determines an economic life by minimizing annual investment cost and operation and maintenance cost. In this paper, an aquisition cost of KlAl is obtained from PRICE H and O&M cost from PRICE HL model. We obtained various results depending upon production quantity. An economic life for KlAl is estimated 18 years when 300 tanks are produced.