• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.130-135
• /
• 2003

This paper presents the method for structure borne noise analysis of a flexible body in multibody system. The proposed method is the superposition method using flexible muitibody dynamic analysis and finite element one. This method is executed in 3 steps. In the la step, time dependent quantities such as dynamic loads, modal coordinates ana gross body motion of the flexible body are calculated efficiently through flexible multibody dynamic analysis. And frequency response functions are computed using Fourier transforms of those time dependent quantities. In the 2$\^$nd/ step, acoustic pressure coefficients are obtained through structure-acoustic coupling analysis by finite element analysis. In the final step, frequency responses of acoustic pressure at the acoustic nodes are recovered through linear superposition of frequency response functions with acoustic pressure coefficients. The accuracy of the proposed method is verified in the numerical example of a simple car model.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.353-354
• /
• 2006

This paper suggests the packet loss recovery method to communicate in real-time in the Internet. To reduce the effects of packet loss, Forward Error Correction(FEC) that adds redundant information to voice packets can be used. The major cause for speech quality degradation in IP-networks is packet loss. So, We recovered single lossy packet by using FEC method and concealed continued errors. The proposed scheme is evaluated in the Gilbert Internet channel model. The high quality of audio maintained up to 30% packet loss.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.197-198
• /
• 2007

In this paper, a 10Gbps Clock and Data Recovery circuit is designed in $0.18{\mu}m$ CMOS Technology. The circuit incorporates a multiphase LC oscillator, a quarter-rate Bang-Bang phase detector, a Charge Pump and a second order loop filter. The simulation results show that the designed circuit has a peak-to-peak clock jitter of 4.1ps and a peak-to-peak recovered data jitter of 8ps while consuming about 44mW from a 1.8V supply.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.5
• /
• pp.105-110
• /
• 2017

It is natural that the medical advertisement should be guaranteed as part of the basic commercial activities of medical institutions. However, the general public are non-specialist and they have less informed about medical care than medical specialists, and it is not easy to judge and select medical information. Also, if someone damaged by illegal medical advertising, it cannot be recovered to the original. In this regard, medical advertising has been legislated so that medical organizations can pre - screen the medical laws. However, In December 2015, after the Constitutional Court ruled unconstitutional preliminary censorship, it became virtually impossible to pre-screen. In recent years, illegal medical advertisement have been on the rise, and false and exaggerated medical advertising are increasing the damage to medical consumers. Therefore it is urgent to take countermeasures about this. Thus, this paper try to analyzes the characteristics of general commercial and other medical advertisements and looks for alternatives that can minimize the damage caused by illegal medical advertisements and institutional weaknesses by analyzing the regulatory trends in medical advertising.

• 제어로봇시스템학회:학술대회논문집
• /
• 1998.10a
• /
• pp.20-25
• /
• 1998

This paper proposes a new compliant contact control strategy for the robot manipulators accidentally interacting with an unknown environment. The main features of the proposed method are summarized as follows: First, each entry in the diagonal stiffness matrix corresponding to the task coordinate in Cartesian space is adaptively adjusted during con-tact along the corresponding axis based on the contact force with its environment. Second, it can be used for both unconstrained and constrained motions without any switching mechanism which often causes undesirable instability and/or vibrational motion of the end effector. Third, the adjusted stiffness gains are automatically recovered to initially specified stiffness gains when the task is changed from constrained motion to unconstrained motion. The simulation results show the effectiveness of the proposed method by employing a two-link direct drive manipulator interacting with an unknown environment.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.1
• /
• pp.104-113
• /
• 2012

Wind farm grid codes require wind generators to ride through voltage sags, which means that normal power production should be re-initiated once the nominal grid voltage has been recovered. Doubly Fed Induction Generator (DFIG) based wind farm is gaining popularity these days because of its inherent advantages like variable speed operation and independent controllability of active and reactive power over conventional Induction Generator (IG). This paper proposes a new control strategy using DFIGs for stabilizing a wind farm composed of DFIGs and IGs. Simulation analysis by using PSCAD/EMTDC shows that the DFIGs can effectively stabilize the IGs and hence the entire wind farm through the proposed control scheme by providing sufficient reactive power to the system.

• Journal of Digital Contents Society
• /
• v.4 no.2
• /
• pp.139-146
• /
• 2003

This paper explains the design and implementation of the ERA(Error Recovery Agent). ERA is a system that is suitable for detecting, sharing and recovering software error based on multimedia distance education system. This system consists of an ED, ES, and ER. ED detects an error by hooking techniques. ES is an agent which is an error sharing system for distributed multimedia distance education system. We propose how an error application can be treated and recovered as 'media' in a multimedia collaborative environment.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2005.12a
• /
• pp.80-81
• /
• 2005

The resilience of the exchange bias ($H_{EX}$) in ferromagnet / antiferromagnet bilayers is generally studied in terms of repeated hysteresis loop cycling or by protracted annealing under reversed field (training and long-term relaxation respectively). The stability of $H_{EX}$ is fundamental for practical application of exchange bias systems. In this paper we report measurements of training and relaxation in FeNi films coupled with the antiferromagnet FeMn. We show that $H_{EX}$ suppressed both by training and relaxation was partially recovered as soon as a field cycling for consecutive hysteresis loop measurement was stopped or the magnetization of the ferromagnet was switched back to the biased direction.

• The Pure and Applied Mathematics
• /
• v.14 no.2 s.36
• /
• pp.127-137
• /
• 2007

The classical Bohr's inequality states that $|z+w|^2{\leq}p|z|^2+q|w|^2$ for all $z,\;w{\in}\mathbb{C}$ and all p, q>1 with $\frac{1}{p}+\frac{1}{q}=1$. In this paper, Bohr's inequality is generalized to the setting of n-inner product spaces for all positive conjugate exponents $p,\;q{\in}\mathbb{R}$. In. In particular, the parallelogram law is recovered and an interesting operator inequality is obtained.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.103-104
• /
• 2017

This paper is to provide a method to prevent air loss of the concrete using reject ash based ternary blended aggregate due to absorption of AE agents by reject ash by adding AE agents into reject ash before mixing concrete. Test results indicate that air loss due to presence of reject ash in ternary blended aggregate can be recovered by over use of AE agents into aggregate directly before mixing.