• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.144-149
• /
• 2020

A database called Home Location Register(HLR) plays a major role in location management in mobile cellular networks. The objectives of this paper are to identify the problems of the current HLR system through rigorous analysis, to suggest solutions to them. The current HLR backup method is a process of simply writing the changed memory SLD block to disk, which has a problem in maintaining database consistency. Since information change and backup are performed separately by separate processes, there is a risk of information inconsistency when an error restart occurs. To solve this problem, a transaction concept was introduced for subscriber-related operation functions and a recovery method through logging and checkpointing was introduced. The subscriber related functions of tasks terminated normally by the suggested process are recovered with consistency even after system restarts. Performance is also not affected seriously because disk tasks for log occur with only subscriber related functions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.75-78
• /
• 1989

In this paper, A last time delay damper is presented for HB ( HyBrid ) step motor, which has large oscillation characteristics.The design objective is to develop a cost-effective and good-performance damper that would be applyed to HB step motor / driver system without the addition of transducer that would add a weight, size and cost to the system. The Back EMF signal which is recovered from current and voltage signal is used for the measuring the rotor position. It would be possible to get more accurate delay time for the motor driver system. It is proved that the maximum overshoot can be reduced to 13% at stopping through experiment.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.459-460
• /
• 2008

In this paper, a 10Gbps clock and data recovery circuit is designed in $0.18{\mu}m$ CMOS technology. The circuit incorporates a multiphase LC oscillator, a quarter-rate Bang-Bang phase detector, a charge pump and a second order loop filter. The simulation results show that the designed circuit has a peak-to-peak clock jitter of 4.2ps and a peak-to-peak recovered data jitter of 8ps while consuming about 80mW from a 1.8V supply.

• 전기전자학회논문지
• /
• 제2권1호
• /
• pp.24-33
• /
• 1998

Independent Component analysis (ICA) is a new statistical method for extracting statistically independent components from their linear instantaneous mixtures which are generated by an unknown linear generative model. The recognition model is learned in unsupervised manner so that the recovered signals by the recognition model become the possibly scaled estimates of original source signals. This paper addresses the neural learning approach to ICA. As recognition models a linear feedforward network and a linear feedback network are considered. Associated learning algorithms for both networks are derived from maximum likelihood and information-theoretic approaches, using natural Riemannian gradient [1]. Theoretical results are confirmed by extensive computer simulations.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.868-871
• /
• 2002

Nowadays, zerotrees based digital watermarking techniques are considered to be an efficient watermarking technique used for multimedia data in a compressed form. This paper presents a technique for watermarking an image, by employing zerotrees derived from the wavelet packet coefficients of the transformed image to carry the watermark signal. By setting a proper threshold in zerotrees determining process, the watermark signal can be recovered without the need of original image. With our proposed technique, more amount of watermark signal can be embedded within the image, compared to ordinary wavelet transform based techniques. The experimental results show the improved performance in both qualities of the resultant watermarked image and robustness of the embedded watermark signal against common signal processing such as brightness/contrast enhancement, high-pass filtering, Gaussian noise adding and JPEG compression scheme

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1185-1188
• /
• 2003

This paper describes a design for a 2.5Gb/s serial data link CMOS transceiver based on the InfiniBand$^{TM}$ specification. The transceiver chip integrates data serializer, line driver, Tx PLL, deserializer, clock recovery, and lock detector. The designed transceiver is fabricated in a 0.25 ${\mu}{\textrm}{m}$ CMOS mixed-signal, 1-poly, 5-metal process. The first version chip occupies a 3.0mm x 3.3mm area and consumes 450mW with 2.5V supply. In 2.5 Gbps, the output jitter of transmitter measured at the point over a 1.2m, 50Ω coaxial cable is 8.811ps(rms), 68ps(p-p). In the receiver, VCO jitter is 18.5ps(rms), 130ps(p-p), the recovered data are found equivalent to the transmitted data as expected. In the design for second version chip, the proposed clock and data recovery circuit using linear phase detector can reduce jitter in the VCO of PLL.L.

• ETRI Journal
• /
• 제24권5호
• /
• pp.373-380
• /
• 2002

This paper presents a new method for a visual cryptography scheme that uses phase masks and an interferometer. To encrypt a binary image, we divided it into an arbitrary number of slides and encrypted them using an XOR process with a random key or keys. The phase mask for each encrypted image was fabricated nuder the proposed phase-assignment rule. For decryption, phase masks were placed on any path of the Mach-Zehnder interferometer. Through optical experiments, we confirmed that a secret binary image that was sliced could be recovered by the proposed method.

• 호남수학학술지
• /
• 제33권2호
• /
• pp.247-259
• /
• 2011

In this paper, the $(\frac{G'}{G})$-expansion method is used to construct new exact travelling wave solutions of some nonlinear evolution equations. The travelling wave solutions in general form are expressed by the hyperbolic functions, the trigonometric functions and the rational functions, as a result many previously known solitary waves are recovered as special cases. The $(\frac{G'}{G})$-expansion method is direct, concise, and effective, and can be applied to man other nonlinear evolution equations arising in mathematical physics.

• ETRI Journal
• /
• 제34권5호
• /
• pp.719-726
• /
• 2012

Messages are generally selected with the same probability in the encoding scheme of rateless codes for equal error protection. In addition, a belief propagation (BP) decoding scheme is generally used because of the low computational complexity. However, the probability of recovering a new message by BP decoding is reduced if both the recovered and unrecovered messages are selected uniformly. Thus, more codeword symbols than expected are required for the perfect recovery of message symbols. Therefore, a new encoding scheme with a nonuniform selection of messages is proposed in this paper. In addition, a BP-Gaussian elimination hybrid decoding scheme that complements the drawback of the BP decoding scheme is proposed. The performances of the proposed schemes are analyzed and compared with those of the conventional schemes.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.927-939
• /
• 2007

This paper concerns dynamics of a wheel-axle set on a tangent track which was already published in a book titled "Dynamics of Railway Vehicle Systems" authored by Garg and Dukkipati [1], pointing out several missing terms and erroneous parts in the derived expressions on the conventional governing equations of motion. It is indicated that the x-direction components of normal forces at left and right wheel-rail contact points in the equilibrium axis were missed. Another point is that in deriving the creepages the disturbed velocity components in both x and y directions in the equilibrium axis should not be disregarded in the first term of the numerators. When considering the creepage in the y direction in the body coordinate system, the second term of lateral velocity at the contact point also cannot be neglected. Besides, the hyper-assumptions in the final expressions of vertical components of normal forces at left and right wheel-rail contact points have been recovered in reaching the final stage of analytical model development. Finally it is noteworthy that the process of applying creep theory is deemed to contain a little bit inconsistencies and ambiguities to be clear.