• 제목/요약/키워드: Recovered Material

검색결과 310건 처리시간 0.022초

Recover of gypsum from waste plaster board and the refining process

  • Song, Young-Jun;Hiroki Yotsumoto
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.342-348
    • /
    • 2001
  • This study was conducted to obtain granular crystalline gypsum that can be used as raw material for plaster boards or cements from waste Plaster board. We could disintegrate preferentially gypsum to gypsum needle in 10${\mu}{\textrm}{m}$ or less size among the contents of waste plaster board (gypsum, paper, fiber, and inorganic material .etc.) by hydration afterwards the dehydration of crushed waste plaster board. In this case, the optimum conditions for minimizing the size of gypsum were dehydration rate of 75%~ 85%, hydration concentration of 10~20%, agitation speed of 250~400rpm, crushing size of 2cm or less. Gypsum of 98.21% grade was recovered with 99.0% yield from under screenings of 325mesh wet screening which followed by the dehydration-hydration process performed in the conditions of dehydration rate of 80%, hydration concentration of 15%, agitation speed of 300rpm, crushing size of 2cm or less. Subsequently, Plate-like Crystalline gypsum of is 151${\mu}{\textrm}{m}$ size and the grade of 99.49% with the Yield of 98.0% from the upper screenings of 270mesh wet screening carried out after the re-crystallization of the recovered gypsum needle slurry.

  • PDF

장기 사용 Cr-Mo강 열화재의 파괴 인성 평가와 수명예측 (Life Prediction and Evaluation of Fracture Toughness of a Cr-Mo Degraded Steel During Long Service)

  • 권재도
    • 대한기계학회논문집
    • /
    • 제16권8호
    • /
    • pp.1421-1428
    • /
    • 1992
  • 본 연구에서는 실제 고온, 고압용기에 장기 사용하여 재료 특성이 변화된 열 화재와 열화재를 열처리하여 충격치를 회복시킨 회복재의 두 종류의 재료를 사용하여 탄소성 파괴 인성치 J$_{IC}$실험을 수행하여 장기사용에 따른 재질열화에 의한 파괴 인성치의 변화 상태를 검토해 보고, 이를 응용한 수명예측 즉, 3차원 표면 균열을 갖 인 판이 열화된 경우와 건전한 경우를 가정하여 피로 파괴 과정중 파단 특성에 어떤 차이가 일어날까에 대해 연구 검토해 보았다.

Recovery of Cholesterol from the $\beta$-Cyclodexgtrin-Cholestrerol Complex Using Immobilized Cyclomaltodextrinas of Alkalophilic Bacillus sp. KJ 133

  • Kwon, Ho-Jeong;Jung, Hye-Jin;Kwak, Hae-Soo
    • Journal of Microbiology and Biotechnology
    • /
    • 제11권4호
    • /
    • pp.712-715
    • /
    • 2001
  • A new combined method including the enzymatic hydrolysis of $\beta$-cyclodextrin ($\beta$-CD) and solvent extraction fo cholesterol from the hydrolyzed mixture was developed to recover cholesterol from a $\beta$-CD-cholesterol complex prepared from dairy products, such as cream, milk, and cheese. Cyclomaltodextrinase (cyclomatodextrin dextrin hydrolase, EC 3.2.1.54, DCase_ prepared form alkalophilic Bacillus sp. KJ 133 hydrolyzed the $\beta$-DC of the $\beta$-CD-cholesterol complex, and then, free cholesterol was efficiently extracted from the hydrolyzed mixture by a nonpolar solvent such as ethyl acetate. To increase the stability of free CDase, immobilized CDase was developed using sodium alginate as a carrier. The immobilized CDase showed a high recovery yield of cholesterol in a time-dependent manner compared to the free CDase. A gas chromatography analysis showed that more than 70% of cholesterol was recovered from the $\beta$-DC-cholesterol complex of cream by the immobilized CDase, whereas only 3% and 29% of cholesterol were recovered when the solvent extraction and free CDase treatment were used, respectively. The cholesterol recovered can be used as a raw material for steroid synthesis. Furthermore, this method can be an efficient way to recover cholesterol or other organic compounds that are bound in a $\beta$ -DC-cholesterol or -organic compound complex.

  • PDF

흰쥐에서 반회후두신경 손상 후 만성적 전기자극이 후두 기능 회복에 미치는 영향 (Effects of Chronic Electrical Stimulation on Functional Recovery Following Laryngeal Reinnervation in the Rat)

  • 김지연;조선희;한후재;박수경;신유리;정성민
    • 대한후두음성언어의학회지
    • /
    • 제11권2호
    • /
    • pp.172-177
    • /
    • 2000
  • Background and Objectives : Until now, various attempts have been made fir reinnervating paralyzed vocal cord. Nevertheless, the most cases did not produce satisfactory outcome due to occurrence of synkinesis of larynx secondary to misdirected axonal regeneration. Accordingly, the purpose of this investigation is to learn the effect of chronic electrical stimulation on regeneration of the recurrent laryngeal nerve. Material and Methods : Using 20 healthy male Sprague-Dawley rats(250-300g) with normal vocal functions, transections were made on their left recurrent laryngeal nerves and then primary anastomosis were performed under the operating microscope and they were divided into an experimental group and a control group each having 10 rats. After the procedure, for the experimental group, chronic electrical stimulation was carried out until vocal cord movement was functionally recovered. for the control group, only chronic electrical stimulation was not given. Result : In experimental group, the number of functionally recovered rats was two and in control group, that of functionally recovered rate was same. The reorganization of posterior cricoarytenoid muscle motoneuron in nucleus ambiguus appeared in the case of directed reinnervation of recurrent laryngeal nerve. Conclusion : The chronic electrical stimulation does not a direct beneficial effect on the early functional recovery in rats with injured recurrent laryngeal nerve.

  • PDF

냉열잠열축열조의 성능해석 (Performance of the Cold Latent Storage System)

  • 윤호식;노승탁
    • 대한설비공학회지:설비저널
    • /
    • 제17권4호
    • /
    • pp.456-465
    • /
    • 1988
  • The performance of the cold latent heat storage is investigated by experiment and by a simplified analytic approach. The heat storage tank has eight horizontal circular tubes and one path of refrigerant evaporating tube. The phase change material in the heat storage tank is water which is frozen by evaporating refrigerant of refrigeration system and melts by the warm air in the heat storage tank. In the experiment, the performance has been studied by the various conditions including the initial water temperature on solidification and flow rate and temperature of air. The rate of recovered heat has been simulated by a simplified model and the results shows a good agreement. In solidification process, initial water temperature causes time delay corresponding to the sensible heat and it is found that the shape of evaporator is important. In melting process, the recovered heat rate from the heat storage tank is proportional to $Re^{0.8}(T_{bi}-T_f)$ of air where $T_{bi}$ and $T_f$ indicate temperatures of inlet air and phase change, respectively. And the deminishing rate of the recovered heat is higher for the higher heat rate.

  • PDF

Study on the Rigidity of the Solid-HDDR Treated Nd-Fe-B-type Materials

  • Kang, S.J.;Kwon, H.W.
    • Journal of Magnetics
    • /
    • 제3권1호
    • /
    • pp.9-14
    • /
    • 1998
  • A non-coercive cast Nd-Fe-B-type material can be easily converted into a coercive one by employing HDDR process. Applying the conventional HDDR process to the Nd-Fe-B-type material generally leads to a powder-like material. HDDR treated material in a solid form can, however, be realised if the process is properly modified (solid-HDDR). In the present study, the change of rigidity (compressive strength) of the Nd-Fe-B-type material during the solid-HDDR has been investigated using a homogeneous sintered magnet with composition $Nd_{13.8}Dy_{0.7}Fe_{78.25}Si_{0.15}Mn_{0.6}B_{6.5}.$ It has been found that the low strength of the hydrided material was improved by the subsequent disproportionation. The restoration of the strength was explained by the eutectoid-like disproportionation structure containing fine neodymium hydride rod embedded in tough iron matrix. The high strength of disproportionated material was reduced radically in earlier stage of recombination, and this wes explained by the reduction of the disproportionated phase. The reduced strength was, however, recovered by further recombination, and this was explained by the fact that as the recombination continues the recombined grains adhere together. The optimally HDDR processed material has a comparable or even higher strength with respect to the initial sintered material prior to the solid-HDDR. The present study suggested that the rigidity of Nd-Fe-B-type material could be retained even after the solid-HDDR.

  • PDF

돼지의 수정란이식에 관한 고찰 (Studies on Embryo Transfer in Pigs)

  • 손동수
    • 한국수정란이식학회지
    • /
    • 제3권1호
    • /
    • pp.6-12
    • /
    • 1988
  • The possibility of embryo transfer technique in pigs to introduce a new genetic material into closed herds for disease control was investigated. The results investigated were as follows: 1. The exhibiting rate of estrus on the administration of altrenogest and PMSG ranged from 83.3 to 100% and the estrus exhibited within 4.0 - 5.3 days after the administration of altrenogest. 2. The average number of ovulation points per pig by the injection of PMSG and HCG were 14.0 - 30.7. 3. The average number of recovered embryos per pig was 15.7, and 72.8% of embryos were recovered. 4. The pregnancy rate of recipients was 63.6% and the survival rate of transferred embryos were 21%. 5. When the 1-cell embryos were cultured for 24hrs, they were all developed. Therefore it is possible to recover and preserve the embryos from the donor pigs which have high genetic ability, and to transfer embryos to recipient pigs which are separated from donor pigs in Korea.

  • PDF

Synthesis of TiCx Powder via the Underwater Explosion of an Explosive

  • Tanaka, Shigeru;Bataev, Ivan;Hamashima, Hideki;Tsurui, Akihiko;Hokamoto, Kazuyuki
    • Metals and materials international
    • /
    • 제24권6호
    • /
    • pp.1327-1332
    • /
    • 2018
  • In this study, a novel approach to the explosive synthesis of titanium carbide (TiC) is discussed. Nonstoichiometric $TiC_x$ powder was produced via the underwater explosion of a Ti powder encapsulated within a spherical explosive charge. The explosion process, bubble formation, and synthesis process were visualized using high-speed camera imaging. It was concluded that synthesis occurred within the detonation gas during the first expansion/contraction cycle of the bubble, which was accompanied by a strong emission of light. The recovered powders were studied using scanning electron microscopy and X-ray diffraction. Submicron particles were generated during the explosion. An increase in the carbon content of the starting powder resulted in an increase in the carbon content of the final product. No oxide byproducts were observed within the recovered powders.

An Insight Into the Recycling of Waste Flexible Polyurethane Foam Using Glycolysis

  • Woo Seok Jin;Pranabesh Sahu;Gyuri Kim;Seongrok Jeong;Cheon Young Jeon;Tae Gyu Lee;Sang Ho Lee;Jeong Seok Oh
    • Elastomers and Composites
    • /
    • 제58권1호
    • /
    • pp.32-43
    • /
    • 2023
  • The worldwide use of polyurethane foam products generates large amounts of waste, which in turn has detrimental effects on the surroundings. Hence, finding an economical and environmentally friendly way to dispose of or recycle foam waste is an utmost priority for researchers to overcome this problem. In that sense, the glycolysis of waste flexible polyurethane foam (WFPF) from automotive seat cushions using different industrial-grade glycols and potassium hydroxide as a catalyst to produce recovered polyol was investigated. The effect of different molecular weight polyols, catalyst concentration, and material ratio (PU foam: Glycols) on the reaction conversion and viscosity of the recovered polyols was determined. The obtained recovered polyols are obtained as single or split-phase reaction products. Besides, the foaming characteristics and physical properties such as cell morphology, thermal stability, and compressive stress-strain nature of the regenerated flexible foams based on the recovered polyols were discussed. It was observed that the regenerated flexible foams displayed good seating comfort properties as a function of hardness, sag factor, and hysteresis loss compared to the reference virgin foam. With the growing demand for a sustainable and circular economy, a global valorization of glycolysis products from polyurethane scraps can be realized by transforming them into profitable substances.

Recycling of end-of-life LiNixCoyMnzO2 batteries for rare metals recovery

  • Sattar, Rabia;Ilyas, Sadia;Kousar, Sidra;Khalid, Amaila;Sajid, Munazzah;Bukhari, Sania Iqbal
    • Environmental Engineering Research
    • /
    • 제25권1호
    • /
    • pp.88-95
    • /
    • 2020
  • An investigation of rare metals recovery from LiNixCoyMnzO2 cathode material of the end-of-life lithium-ion batteries is presented. To determine the influence of reductant on the leach process, the cathode material (containing Li 7.6%, Co 20.4%, Mn 19.4%, and Ni 19.3%) was leached in H2SO4 solutions either with or without H2O2. The optimal process parameters with respect to acid concentration, addition dosage of H2O2, temperature, and the leaching time were found to be 2.0 M H2SO4, 4 vol.% H2O2, 70℃, and 150 min, respectively. The yield of metal values in the leach liquor was > 99%. The leach liquor was subsequently treated by precipitation techniques to recover nickel as Ni(C4H7N2O2)2 and lithium as Li2CO3 with stoichiometric ratios of 2:1 and 1.2:1 of dimethylglyoxime:Ni and Na2CO3:Li, respectively. Cobalt was recovered by solvent extraction following a 3-stage process using Na-Cyanex 272 at pHeq ~5.0 with an organic-to-aqueous phase ratio (O/A) of 2/3. The loaded organic phase was stripped with 2.0 M H2SO4 at an O/A ratio of 8/1 to yield a solution of 114 g/L CoSO4; finally recovered CoSO4.xH2O by crystallization. The process economics were analyzed and found to be viable with a margin of $476 per ton of the cathode material.