• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.168-169
• /
• 2000

We have tried to enhance the density of the near-field optical memory and to improve the recording/readout speed. The current optical memory has the limitation in both density and speed. This barrier due to the far-field nature can be overcome by the use of the near-field$^{(1)}$ . The optical data storage density can be increased by reducing the size of the nanometric aperture where the near-field is obtained. To fabricate the aperture in precise dimension, we applied the orientation-dependent / anisotropic etching property of crystal Si often employed in the field of MEMS$^{(2)}$ . And so we fabricated the 10$\times$10 aperture array. This array will be also the indispensable part for speeding up. One will see the possibility of the multi-tracking pickup in the phase changing type memory through this array$^{(3)}$ . This aperture array will be expected to write the bit-mark whose size is about 100nm. We will show the recent result obtained. (omitted)

• 한국생산제조학회지
• /
• 제19권2호
• /
• pp.301-305
• /
• 2010

Cutting procedures where qualities are determined by various demand factors largely influences shipbuilding productivity. Particularly, defects in cutting shapes and cutting surface results in delay for post shipbuilding stages such as in welding and assemblage lines which could become factors for reduced economic viability of the project. Existing cutting procedures utilize fossil fuels such as propane or ethylene as the main fuel component and these methods applied particularly to ship plate cutting gives relatively slow cutting speed and generates large quantities of harmful and sometimes poisonous polluting fumes of which warrants an urgent need to look for alternative cutting methods. Recent introduction of hydrox gas generated by electrically dissociating water into hydrogen and oxygen components to be utilize as an alternative cutting fuel has resulted not just in visible improvement on cutting quality and speed over the existing methods but it has also been welcomed as an environmentally friendly clean fuel source. This paper has been prepared to serve as the basis for accommodating this environmentally friendly hydrox gas cutting method into actual working environment by observing and recording hydrox gas cutting thermal characteristics.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3116-3123
• /
• 1999

Current disk systems are generally designed to reduce read traffic more effectively. Hence, write traffic of the I/O workload could potentially become a bottleneck of the disk system performance. In order to overcome this problem without much cost, this paper presents using outermost-zone track of multi-zoned recording disk as a secondary disk cache. The proposed disk cache improves the disk system performance by following exploitations: speed difference between block transfer and track transfer, difference in transfer rate between outermost-zone tracks and inner tracks, reduction in the seek time caused by decreasing the number of disk cache tracks, and idle period during burst accesses. In addition, it does not waste the disk space because it allocates the caching space by the cylinder unit. The simulation results show that the proposed system improves 2.54∼3.11 times better in terms of average response time for write operations than existing disk systems..

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.821-824
• /
• 2005

Probe storage is one of the strong candidates for future mobile storage device since it has potential of recording density over I $Tb/in^2$ with r/w speed over 100 Mbps. It also uses silicon-processing technology that suits the purpose of small form factor. In this paper, write characteristics of resistive probe that can rotate the field direction of PZT by field-induced resistance changes in a small resistive region at the apex of the tip will be presented. Also, the relationship between the size of tip and the available write width is investigated for different source bias conditions. For this study, two-dimensional computer simulation ($SILVACO^{TM}$) was performed. With optimum design, the width of the writing electric field can be smaller than 50nm

• 한국컴퓨터정보학회논문지
• /
• 제23권8호
• /
• pp.95-99
• /
• 2018

This research is related to GPS(global positioning system) enabled device navigation service and consists of two parts. The first is the logic that records the route guidance video and records GPS information in time, and the second is the logic that outputs the created video data based on real time GPS. The recording logic first determines the origin and destination, records the video from the origin to the destination and it adjusts the speed of the image in a specific area so that the user can see it easily. And insert ancillary information and advertisements that can help guide the route. In the output logic, we provide navigation services using the video and GPS data tables we created, and it receives user's GPS information in real time and corrects it based on the recent user location to reduce errors. This provides local guidance services to people who lack language skills like foreigners.

• 한국농림기상학회지
• /
• 제4권4호
• /
• pp.197-202
• /
• 2002

A new method is used to estimate the amount of water evaporation from Class A Pan with higher precision and accuracy. The principle of method is to detect the weight change of a buoyant sinker resulting from a change in water level of Class A Pan. A strain-gauge load cell is used to measure the weight change. Field observation of evaporation was done at Pohang Meteorological Station from June 24 to August 4, 2002. By using this new method, it is possible to measure hourly evaporation accurately even under a strong solar radiation and wind disturbance, enabling a direct comparison of evaporation with other meteorological elements. At night, under low humidity and high wind speed conditions, more evaporation was recorded than during daytime. Maximum evaporation rates observed during this period exceed 1.0 mm/hour under the sunny and windy conditions with low humidity. To understand relationships between meteorological elements and latent heat flux at ground level, we suggest intensive held experiments using high accuracy evaporation recording instruments with hourly time interval.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1465-1467
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. e are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1347-1350
• /
• 2005

Recently, as the road capacity reaches a limit and environmental problems become serious, there exists a gradual increasing need for railway vehicles that are environment-friendly, punctual, reliable and safe. Accordingly, in addition to conventional railroad vehicles, lots of vehicles are being newly developed. Using the developed installed measurement system, the performance characteristics of railway vehicle could be monitored precisely. After recording the input real time data of each signal from railway vehicle to the network line, we could acquire the needed information through post processing program. We could verify the running performances of railway vehicle using this system. As a result, many latent defects have been found and corrected in the prototype train. The measurement systems have contributed to dramatic reduction of the developing period.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.397-400
• /
• 2000

The demands of high data transfer rate and high recording density in optical disk memory device are being increased. In order to achieve high performance, lever actuator for optical disk is proposed. Firstly, the role of lever and structure are discussed and the flexure hinge is introduced to enhance the precise movement. Next is to present the magnetic circuit structure and concept design for the lever actuator. Finally, the dynamic modeling of the lever actuator is found and the analysis results are shown. Consequently, the lever actuator shows the possibility as a pickup actuator for the next generation optical disk.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2013년도 추계학술대회
• /
• pp.125-127
• /
• 2013

해상교통관제시스템(Vessel Traffic System: VTS)에서는 해상 사건/사고를 사후 확인하거나 해상 교통량 확인을 위해 사용하기 위한 목적으로 VTS에서 발생하는 데이터를 저장 및 관리한다. 특정 지역에 대한 장시간 교통량 확인에서는 녹화된 재생 데이터를 고속 배속으로 실행시켜 살펴보는 것이 시간 단축에 큰 도움이 된다. 그런데 일반 영상이 아닌 VTS 서브 시스템간 주고 받은 메시지와 영상이 포함된 VTS 녹화재생에서는 고속 배속을 지원하는데 자연스럽지 않은 문제점이 발생하고 있다. 따라서 본 논문에서는 VTS 녹화재생 기능이 고속 배속을 지원하기 위해 필요한 요구사항을 분석한다.