• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1998.04b
• /
• pp.6-6
• /
• 1998

In 1957, the first magnetic disk drive compatible with a movable head was introduced as an external file memory device for computer system. Since then, magnetic disks have been improved by increasing the recording density, which has brought about the development of a high performance thin film magnetic head. The thin film magnetic head has a magnetic circuit on a ceramic substrate using IC technology. The physical property of the substrate material is very important because it influences the tribology of head/disk interface and also manufacturing process of the head. $Al_{2}O_{3}$-TiC ceramics, so called ALTIC, is known to be one of the best substrate materials which satisfies this property requirement. Even though the head is not in direct contact with the disk, frequent instantaneous contacts are unavoidable due to its high rotating speed and the close gap between them. This may cause damage in the magnetic recording media and, thus, it is very important that the magnetic head has a good wear resistance. $Al_{2}O_{3}$-TiC ceramics has an excellent tribological property in head/disk interface. Manufacturing process of thin film head is similar to that of IC, which requires extremely smooth and flat surface of the substrate. The substrate must be readily sliced into the heads without chipping. $Al_{2}O_{3}$-TiC ceramics has excellent machineability and mechanical properties. $Al_{2}O_{3}$-TiC ceramics was first developed at Nippon Tungsten Co. as cutting tool materials in 1968, which was further developed to be used as the substrate materials for thin film head in collaboration with Sumitomo Special Metals Co., Ltd. in 1981. Today, we supply more than 60% of the substrates for thin film head market in the world. In this paper, we would like to present the sintering process of $Al_{2}O_{3}$-TiC ceramics and its property in detail.

• The Journal of Korean Medicine
• /
• v.15 no.2 s.28
• /
• pp.306-320
• /
• 1994

An account book of medical treatment is a form of collection materials for diagnostic standardization, and it is a basis of standardization, standardization of medical records is a preconsideration of each standardization. But an account book of medical treatment is only a kind of form for recording medical treatment, therefore standardization of medical treatment eventually holds the key to the standardization of recording charts. However until now we have gradually reformed medical records in accordance with individual characters of medical treatment, and didn't have even standard sheme of medical records, also medical terms for medical records had an inconsistency of redescription and reiterative representation for an identical terms in all parts of the East learning, medical terms for medical records didn't unity. To make better this realities, standardization study used orginated system in the process of existing study, it can get ready the basis of discussion between O.M.D and O.M.D. it can make analysis of diagnostic course and can clearly understand usable information by diagnostic course. for that reason we hope that the basis of standardization is accomplished. And in advance of study for this standardization we have to analysis the course of medical treatment with demonstration of roof, first of all we have to study term definition by diagnostic course and prepare basis by diagnostic course. because this study have limits of indivisual study, it needs to long and synthetic investigation in Association levels. Although we cann't completely alternate with methods of measurement which relyed on individual mastery, if we exclude erroes of individual measurement through mechanization and verify results of diagnosis through keynotes, we can realize standardization of medical treatment with demonstration of proof and in this process we can use medical records as a tool collecting exact data, also we can realize standardization of drawing up medical records.

• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.1-5
• /
• 2008

Magnetocardiography (MCG) is a non-contact, non-invasive, and harmless diagnostic tool to detect the abnormal electrical conductivities of the heart caused by the various coronary artery disease or cardiac muscular disease. The purpose of this study is to identify whether MCG signals and MCG parameter values vary depending on the location of sensor assembly. It will be an important reference for the standard measurement. Four healthy male subjects (33.3$\pm$6.3 years) participated in this study. Basal recording was made at 20 mm apart from the chest surface. All subjects were requested to take a regular breathe while MCG was taken. The gap between the chest surface and the bottom of the sensor assembly was 20, 40, 60, and 80 mm. Recording was made using 64 channel MCG system (Axial type, first order gradiometer) developed by Korea Research Institute of Standards and Science (KRISS). After resting for two minutes in a supine position on the bed in magnetically shielded room, MCG were recorded for 30 s. As the sensor location is getting away from the chest surface signal, the amplitude of R and T wave peak decreases to 70% (at 40 mm gap), 50% (at 60 mm), and 37% (at 80 mm) of the reference strength measured (y = $1.3903e^{-0.0169x}$, $R^2$ = 0.99; where y=amplitude remained after reduction, x=distance between chest surface and sensor location). The regression equations may be used as a good reference to calculate how much strength will be decreased by the distance. In MCG parameters, most values of parameters were decreased as the gap was increased. As an example, the current moment at T-wave peak reduced to 52% (at 40 mm gap), 33% (at 60 mm), and 19% (at 80 mm). However, the difference caused by the gap could be reduced by considering the distance when the MCG parameters were calculated. The study results can be used as a useful reference to design the baseline and the sensor location.

• Journal of Science Education
• /
• v.34 no.1
• /
• pp.105-112
• /
• 2010

The purpose of this research was to investigate relations between prior knowledge and primary grade science brilliant intellect's observation and inquiry. The subjects were selected 'Spider and cobweb' that self-regulation quest is available. Subjects were divided into two groups with one group having no prior knowledge about research subject. Compared observation method question type and level that appear between subject achievement to group. Target learning group are 5 ~ 6 school year 17 people for national university for the gifted center of local middle city. Researcher collected and analyzed data using summer vacation concentration education period. Source collection subject's research recording paper, subject's voice recording device, interview data etc. A data analysis tool took advantage of observation method that is studied in existing, question type, question level. Research was able to conclude : First, observation of prior knowledge happened than mass of students who many mass of students are few relatively vigorously. Second, primary grade science brilliant intellect students used more mainly manufacturing observation than simplicity observation that use senses regardless of relative quantity of prior knowledge. Third, prior knowledge expressed variety when many mass of students observe operation relatively.

• Physical Therapy Korea
• /
• v.14 no.1
• /
• pp.55-63
• /
• 2007

This study was designed to examine the relationship between clinical symptoms, self-efficacy, and performance of women with osteoarthritis. It is a survey study of 60 women who were diagnosed as osteoarthritis and given medical treatments from September, 2005 to October, 2005 in hospital 'H' located in Yongin-si. For clinical symptoms, radiographs of the subjects' knees were taken and evaluated the pathology grade by the Kellgren-Lawrence grade. Pain and stiffness was measured by the measure of WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index), and functional reach test was measured in order to examine balancing abilities. Self-efficacy was measured by a tool which has revised the ASES (Arthritis Self-Efficacy Scale), and performance was measured by recording the difficulty of the WOMAC measurements themselves, and the time taken for 20 m walking, going up and down 9 stairs, and 5 sit-down and stand-up repetitions. The resulting differences in the other variables according to performance and the relationship between performance with variables are the following. First, an increase in pain in women with osteoarthritis led to decreased functional ability. Second, an increase in stiffness in women with osteoarthritis led to a decrease in functional ability. Third, a decrease in balance in women with osteoarthritis led to a decrease in functional ability. Fourth, a decrease in self-efficacy in women with osteoarthritis led to a decrease in functional ability. Fifth, the variables for estimating the performance by self-report were pain and self-efficacy. The variables for estimating the performance by recording the time taken was balance and self-efficacy. As a result factors such as pain, balance and self-efficacy in women with osteoarthritis were closely related to performance. Based on the results, it seems that physical therapy programs to decrease pain and to increase the balance in women with osteoarthritis, and psychological approaches to increasing self-efficacy are needed. I hope that the results of this study will be useful data for clinical management and intervention for women with osteoarthritis.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.3
• /
• pp.309-316
• /
• 2010

In this study, a digital particle holographic system and its application to channel-flow measurements were investigated. A double-exposure hologram recording system that is capable of recording digital holograms in a short time interval was developed. A correlation coefficient method was used to determine the focal plane of particles. The Wiener filter was used to remove noises and improve image quality. Two-threshold and image segmentation methods were used for binary image transformation. The cross-correlation method was used for particle pairing. The developed system was employed to study channel flow fields, and the axial velocities of channel flow were measured. The measurement errors are acceptable, and this proves the feasibility of using the digital particle holographic system as a good tool for flow-field measurements.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.842-854
• /
• 2021

Performing industries in Korea and abroad have been attempting a wide range of artistic experiments utilizing online platforms ever since the Covid-19 pandemic. Accordingly, this study will shed light on the functional characteristics of Zoom, which was used as a creative tool for theater performances. At first, after examining theater performances presented in Korea and abroad using Zoom and their characteristics, the production stage of the Zoom play will be analyzed by dividing it into following stages; a research-based pre-production stage, a scene workshop stage that composes each scene based on the script, a recording stage filming each scene on Zoom, and Streaming stage for presenting the show. Furthermore, the actor's approaches to acting in this production process was presumed to be separation of gaze, re-recognition of space, utilization of expressive gestures, and reaction as an active action. As a result, it proposes the possibility of ongoing development of theatrical work using Zoom and the evolutionary aspect of actor's acting approaches in accordance with theatrical work via Zoom.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.216-221
• /
• 1995

Both manufacturing parameters and particles' chemical composition controll coercivity and its distribution of magnetic particles. The coercivity and its distribution are important properties for high density magnetic recording, so these are used as tool for evaluation of reproducibility of magnetic particles. We report in this paper the applications of dM/dH versus H curve, which is derived from magnetic hysteresis loop, to the evaluation of coercivity distribution of magnetic particles and oxidation studies of recording metal particles. The coercivity distri-bution can be estimated from the full width half rnaximun (FWHM) and the peak shape of the dM/dH versus H curve. The peak shape of the curve depends upon distribution of particles' coercivity. The peak of dM/dH versus H curve becomes broad and lor is splitted into two or rmre peaks. It depends on uniformity of particles' coercivity. When the coercivity difference between Ba-Ferrite and ${\gamma}-Fe_{2}O_{3}$ is larger than 600 Oe, the peak becomes broad and is consequently splitted into two peaks. Ununiformly substituted Ba-Ferrite particles show broad peak. It is apparent that the analysis of the curve is one of sensitive measuring techniques for determination of coercivity distri-bution and studies on magnetic properties of substituted Ba-Ferrite and oxidation of magnetic recording metal particles.

• 모자간호학회지
• /
• v.4 no.1
• /
• pp.3-11
• /
• 1994

Presently there is an increasing demand for home health care services due to changes in the demographic structure as a result of an increasing elderly population, socio-economic improvements, and changes in the family structure, as well as the growing number of people with degenerative diseases. In addition to these reasons, rising medical costs and there a shortage of patient beds space in the hospital, particularly since introduction of national medical insurance. There has been an increasing demand for health care health care services. This study was done to identify the basic data for home health care management. It focused on developing client selection criteria, assessment tools, and recording methods. This was accomplished by the researchers visiting the patients in their homes. The research process included preparation investigation, tool development, training of the project researcher, and visiting the clients in their homes. The research tools are as follows : 1. Record development : a) The selection criteria tool for home health care of postpartum women was a structured tool and consisted of four parts. b) The structured assessment tool consisted of a general items, obstetric history, past medical history, methods of feeding, medications taken before admission, laboratory test results, discharge instructions, discharge medications, family tree, economic status, environmental status, a map, health assessment of postpartum women and their newborns. c) The visit note I consisted of the frequency of visits. Visit note II consisted of the date ; nursing problems ; nursing process including the initial assessment ; nursing goal ; visit plan ; postpartum women and their neonate health status, diagnosis, goal, implementation, evaluation, summary, next plan, for visit revision. d) Problem note consisted of the date, problem numbers, nursing diagnosis, problem appearance date problem resolution date. The research results are as follows : 1. Nursing problems : The nursing problems of the postpartum women and their neonates were evaluated by the number of nursing diagnoses and the change in the pattern of nursing diagnosis related to the number of visits. a) Nursing diagnosis The nursing diagnosis was classified according to physical function, psychosocial function, family system maintained function. b) The changes of nursing diagnosis related to the number of visits. As the type of nursing diagnosis changed related to the number of visits the number of nursing diagnoses decreased. 2. Contents of home health care : The content was categorized according to assessment, direct care, counseling, education, family care, reporting to with the attending doctor. The recommendations based on the research results are as follows : 1. Tool development Replication of this study is needed to test the validity of the assessment tools used. 2. Home visit a) Home health care nurses should be licensed and qualified. A referral form from the attending doctor is needed for legal protection of nurses. b) The first home visit need to be within 24 hours of discharge from the hospital to decrease the anxiety of frightened postpartum women. c) When the changes occur in the newborn's status, home health care nurses should consult a pediatrician. Communication within the home healthcare team is essential and needs to consistent and done smoothly. 3. Home health care A Study is required to develop protocols for education of staff and for operation of all aspects of this program.

• Journal of the Korean Society of School Health
• /
• v.2 no.1
• /
• pp.131-146
• /
• 1989

This study was conducted for the development of recording system of students' health problems, and for the application of International Classification of Health Problem in Primary Care(ICHPPC) as a tool of morbidity classification in school health care. The data were collected from 12th of September to 24th of September in 1988. The objects were composed of health problems written by 10 school nurses who take service in the elementary school. The results were as follows: 1. The features of students' health problmes. The health problems of students were 68 problems from the total numbers of 361 codes of ICHPPC. The 93.4% of health problems was contained in 20 descriptive diagnoses and 97.0% was contained in 30 descriptive diagnoses. According to frequency of main health problems, There were abrasion, scratch and blister(26.7%); disorder of stomach function, other disease of stomach and duodenum (20.4%); headache(10.6%); bruise and contusion (5.3%); acute URI (5.0%); laceration and open wound(4.6%); Insect bite and sting(4.0%); epistaxis(3.4%): abdominal pain(2.6%): superficial tissue(1.7%). Out of all health problems, Category 17(accident, injury and poisoning was 44.7%. and Category 9(digestive system Disease) was 22.2%. 2. Applicability of ICHPPC by the school nurses. School nurses used 68 codes, among the total number of 361 codes from ICHPPC. According to ICHPPC method, school nurses can classified more diverse health problems systematically and objectively than that in other studies on school nurses activities. ICHPPC was found as a useful and applicable tool of morbidity classification in the practice of school nurses.