• 한국지구과학회지
• /
• 제42권2호
• /
• pp.201-220
• /
• 2021

이 연구는 최근 연구가 활발히 진행되는 극지 과학에 대한 인식과 관심을 널리 확산하고, 극지 소양의 개념과 방향성을 설정하고자, 학교 공통교육과정에 해당하는 교과서에서 극지 내용을 다룬 현황을 분석했다. 우리나라를 포함해 극지 진출이 활발한 5개국-미국, 프랑스, 일본, 독일, 영국의 과학과와 사회(지리)과 교과서 110권으로부터 추출한 402건의 사례를 함께 분석했고, 내용적, 형식적, 수업 단계적 측면에서 양적·질적 분석을 시도했다. 분석 결과를 바탕으로 지질과학 교육으로서 극지 연구의 가치와 더불어 지구 환경 변화의 지표로서 극지 연구의 인식 확산이 필요함을 논의했다. 교과서는 극지 빙하, 극지 화산론, 고체지구물리학, 극지 기반 시설, 그리고 지질 유산의 보전과 지질 자원 등 주요한 극지 주제와 소재로 활용했다. 이를 통해 극지는 지구의 과거와 현재, 미래 환경에 중요한 단서를 지닌 연구 분야이며 좋은 지질학 교육 소재임을 알 수 있지만, 이를 체계적으로 강조할 교육학적 접근이 보완될 필요가 있다. 이를 위한 연구의 시사점으로 극지 과학 연구자와 교육자의 협력 체계 구축, 극지 소양을 위한 핵심 개념 추출과 그에 따른 내용 재구성, 교과와 연관된 새로운 극지 소재 발굴, 교과서 제시 형식의 다양화와 시각 자료 수준의 심화, 올바른 인지적 이해에 기반한 정의적 심상 고취 등을 제시했다. 교과서 속 극지 내용의 정비를 통해, 학생들의 극지 소양과 극지 과학 문화가 확산되고, 장차 지속 가능한 극지 연구의 원동력이 될 것으로 기대된다.

• 한국노년학
• /
• 제38권4호
• /
• pp.1083-1105
• /
• 2018

본 연구에서는 서울 및 수도권에 거주하는 65세 이상의 노인이 매일 느끼는 일상적 행복감(daily happiness)이 일주일 동안 변동하는지, 매일의 사회적 교류와 신체활동이 개인 내 일상적 행복감의 변동과 어떤 관련성을 갖는지 탐색한다. 다음으로, 노인의 성별, 연령, 학력, 건강에 따라 사회적 교류 및 신체활동과 일상적 행복감 사이의 관련성이 달라지는지 살펴본다. 마지막으로 일상적 행복감의 수준과 변동이 전반적 행복감(global happiness) 수준과 어떻게 관계되는지 확인한다. 이를 위하여 일주일 동안 수집한 생활일지(daily diary) 자료(n=175명${\times}$7일=1225응답)와 동일 기간 동안 활동량계로 수집한 신체활동 자료(n=16명${\times}$7일=112응답)를 활용하여 위계적 회귀분석과 위계적 선형모형(HLM)으로 분석하였다. 분석결과 첫째, 노인의 일상적 행복감 수준은 일주일 동안 변동하고 노인의 젠더와 건강에 따라 일상적 행복감의 수준과 변동 정도에 차이가 있었다. 둘째, 자녀와 대화한 날과 친구와 만난 날 노인의 일상적 행복감이 더 높아졌고, 형제자매와의 만남은 일상적 행복감 수준에 유의한 영향을 미치지 않았다. 하지만 건강상태와의 상호작용항을 투입 결과, 건강하지 않은 노인은 건강한 노인에 비해 형제자매와 만난 날 일상적 행복감이 더 큰 폭으로 높아지는 것이 발견되었다. 셋째, 많이 걸은 날은 일상적 행복감 수준이 높았으며, 저강도 활동시간이 긴 날은 일상적 행복감의 수준이 낮아졌다. 넷째, 일상적 행복감 수준과 전반적 행복감 수준 사이에는 긍정적 관계가 관찰되었으나, 일상적 행복감의 변동 정도는 전반적 행복과 유의미한 관련성을 보이지 않았다. 이상의 결과가 갖는 함의와 후속연구에 대한 제언을 제시하였다.

• 한국과학교육학회지
• /
• 제42권3호
• /
• pp.311-324
• /
• 2022

이 연구에서는 초등 과학영재 학생의 과학티콘 유형 및 과학티콘 만들기에 대한 인식을 분석하였다. 이를 위해 서울특별시 소재 2개 과학영재교육 기관에서 과학영재교육을 받는 4~6학년 학생 71명을 대상으로 과학티콘 만들기 수업을 시행하고, 학생들이 만든 과학티콘을 그 수와 유형에 따라 분석하였다. 또한 설문지와 집단 면담을 통해 과학티콘 만들기에 대한 학생들의 인식을 조사하였다. 과학티콘의 '형태'에 따른 유형 분석 결과를 살펴보면, 과학영재 학생들은 글의 '기술 형태'에서는 '문답형'보다는 '단어형'이나 '문장형'이 더 많았고, '생성 형태'에서는 다른 유형보다 '발음 유희형'과 '혼합형'이 더 많았다. 그림의 '표현 형태'의 경우에는 '텍스트 유형'보다 '그래픽 유형'과 '애니메이션 유형'이 더 많았다. 과학티콘의 '정보'에 따른 유형 분석 결과에서는, '감정'의 경우 '긍정 감정'과 '부정 감정'이 고르게 나타났다. '구성 수준'에서는 기존의 과학티콘을 '일부 수정' 하거나 '전면 재구성'하기보다는 완전히 '새로 구성'한 경우가 더 많았다. '교육과정 초과 여부'에서는 해당 학년 이하보다 상위 학년의 과학과 교육과정에 포함된 과학 지식을 활용한 경우가 더 많았다. '과학 학문 영역'에서는 '에너지', '생명', '지구와 우주', '융합' 영역보다 '물질' 영역의 과학 지식을 활용한 경우가 더 많았다. '과학 지식활용'에서는 '특성 활용형'과 '원리 활용형'보다 '명칭 활용형'이 더 많았다. 학생들은 과학티콘 만들기에 대해 과학 지식의 습득, 다양한 고차원적 사고력 향상, 과학 지식의 설명, 활용, 기억, 이해의 용이성, 재미와 즐거움 및 과학에 관한 관심과 흥미 유발, 감정 표현 기회 증가 등의 긍정적인 인식을 가지고 있었다. 하지만 과학티콘 만들기 과정에서의 어려움, 시간 부족, 단순히 재미로 끝날 우려 등의 제한점도 일부 인식하고 있었다. 이에 대한 교육적 함의를 논하였다.

• 대한정형외과학회지
• /
• 제56권3호
• /
• pp.234-244
• /
• 2021

목적: 현재까지 군에서 발생하는 총기 및 폭발물 손상은 그 중요성에 비해 연구된 것이 제한적이었다. 이를 극복하기 위해 최근 4년간 총기 및 폭발물에 의해 수상한 군인 환자의 근골격계 손상에 대한 특징을 확인하고자 하였다. 대상 및 방법: 2015년 1월부터 2019년 7월까지 총기 및 폭발물에 의해 근골격계 손상을 당한 군인 환자를 대상으로 하였다. 의무 기록과 의료영상저장전송시스템 영상자료를 분석하고, 전화 면담을 통해 short musculoskeletal function assessment (SMFS)를 이용한 기능평가를 후향적으로 시행하였다. 기능평가에 대한 통계 분석으로 무기종류에 따른 분석은 t-test를, 다른 요인에 따른 분석은 ANOVA 분석을 실시하였다. 결과: 총기 및 폭발물에 의한 손상으로 치료받은 총 61명의 환자 중 30명(49.2%)이 근골격계 손상으로 정형외과적 치료를 시행받았다. 평균 수상 나이는 26.4세(21-52세)였다. 간부와 병사의 수는 비슷하였다. 총기 손상이 11명, 폭발물 손상이 19명이었다. 30명 중 수도병원에서 16명(53.3%)이, 민간병원에서 10명(33.3%)이 치료받았다. 12명에게 복수부위 손상이 있었고, 골절이 동반된 16명(53.3%)의 환자 중 절반 이상인 7명의 환자가 다발성 골절이었다. 수부와 하퇴부가 가장 흔한 수상 부위였다. 2명을 제외하고는 모두 개방창이 있었으며, 연부조직 재건술이 필요한 환자는 14명(46.7%)이었다. SMFS 기능평가에는 15명이 응답하였다. 계급에 따른 분석 결과, Borther Index에서 간부의 결과가 통계적으로 유의하게 낮은 것으로 분석되었다(p=0.05). 치료 병원에 따른 분석 결과, Dysfunction Index와 Bother Index 모두 수도병원에서 치료 받은 인원의 점수가 통계적으로 유의하게 낮은 것으로 분석되었다. (p=0.0008, p=0.0149) 결론: 국내 무기에 의해 수상한 군인 환자에 대해 분석한 첫 연구이다. 무기 손상 환자의 치료에 있어 orthopedic burden이 높음을 확인하였으며, 장기적으로 이런 환자들에 대한 치료평가 및 군 외상 시스템 발전을 위해 총기 및 폭발물에 의한 손상 환자를 포함한 군 외상환자 레지스트리 구축이 필요하겠다.

• 헤리티지:역사와 과학
• /
• 제56권2호
• /
• pp.246-262
• /
• 2023

본 연구는 사라진 문화재인 돈의문이 어떻게 디지털로 복원이 되었는지, 돈의문 복원이라는 정책집행 과정에 초점을 맞추어 정책집행 요인을 분석하였다. 이를 통하여 민관 다자간 협업으로 추진된 디지털 돈의문 복원 정책의 집행과정에 있어서 특성을 살펴 보고 이해관계가 다른 기관이 어떻게 집행 과정 속에서 문제를 해결하고 협업을 이루었는지 시사점을 얻고자 하였다. 연구방법은 정책 집행과정을 정책집행자 요인, 정책집행 내용 요인, 정책집행 자원 요인, 정책집행환경 요인으로 나누어 각각의 세부 구성요인별로 분석하였다. 이를 위하여 정책집행 참여자들의 심층인터뷰, 문헌 분석을 조사 하였다. 연구결과 정책집행자 요인에서 정책책임자의 신속한 의사결정 리더십과 정부기관 담당자의 유연한 태도는 각기 다른 이해집단의 갈등을 방지하는데 긍정 영향을 준 것으로 나타났다. 둘째, 정책집행 내용에서는 모두가 수긍할 수 있는 공동목표를 정립하여 일관성 있게 나아간 것이 신뢰를 주었고 시너지를 내게 하였다. 셋째, 정책집행 자원요인에서는 무엇보다 물적 자원인 예산의 중요성이 강조되었다. 마지막으로 정책집행의 환경 요인으로는 정책 추진 당시 4차산업혁명 부각과 함께 5G 이동통신이 세계 최초로 국내에서 개통된 부분이 시기적절한 요소로 작용하였다. 다만, 현재의 디지털 복원 기술이 곧 과거의 기술이 되는 것은 앞으로의 과제라고 할 수 있다. 디지털 돈의문은 사라진 문화재를 AR, VR로 복원한 최초의 사례로 대중매체의 관심과 지지를 받았고 대중의 관심을 끌었다. 이는 또한 디지털 복원이 문화재가 위치한 지역주민과의 갈등이나 실물의 보존과 복원에 있어 이해관계자들의 갈등 없이도 해결 방안이 될 수 있는 모범 사례가 될 수 있음을 보여준다 하겠다.

• 헤리티지:역사와 과학
• /
• 제56권1호
• /
• pp.22-43
• /
• 2023

본 논문은 만공이 1924년에 조성한 정혜사 석조관음보살입상에 대해 다루고 있다. 정혜사 석조관음보살입상은 만공이 제작한 현존하는 가장 이른 시기의 불상으로, 정혜사가 중창되는 과정에서 상징성이 부여된 작품이다. 지금까지 만공이 주도한 불사와 구체적 유물을 통해 사상과 신앙에 접근한 연구는 없었다. 본 연구에서는 만공이 남긴 법어와 일화 및 일제강점기 신문기사 등을 활용하여, 만공이 주석하던 시기 정혜사와 수덕사의 역학 관계를 추적하고 대형 보살상 조성으로 얻은 효과와 그 조성 위치가 갖는 의미에 대해 고찰하였다. 이를 위해 당시 조각을 담당했던 석장 후손과의 면담을 시도하여 정확한 공사 기간과 장인의 명단을 확인하였다. 정혜사 석조관음보살입상에서 보이는 이중보개와 방형보관, 신체에 비해 크게 표현된 손, 두부와 신체의 비례, 석주(石柱)와 같은 체구에서 느껴지는 괴량감 등은 관촉사 석조보살입상에서 영향을 받은 것으로 판단하여 고려 초기에 제작된 관촉사 석조보살입상이 어떻게 근대기 보살상 조성에까지 영향을 미칠 수 있었는지에 대해 살펴보았다. 또한 일제강점기 철도 부설을 계기로 시작된 관촉사 참배와 1929년에 개최된 조선박람회에서 충남을 대표하는 상징으로 활용된 관촉사 보살상의 이미지가 양식의 계승과 변용이라는 관점에서 어떻게 활용되었는지 다각적인 분석을 시도하였다. 본 연구를 계기로 근대기를 대표하는 선사 만공에 대한 이해와 근대기 한국 불교조각 연구의 지평이 넓어지길 기대한다.

• 핵의학기술
• /
• 제27권2호
• /
• pp.99-109
• /
• 2023

Purpose: CT scan makes up for the weak point of the nuclear medicine image having a low resolution and also were used for attenuation correction on image reconstruction. Recently, many studies try to make use of CT images additionally, one of them is to measure the bone mineral density(BMD) using Quantitative CT(QCT) software. BMD exams are performed to scan lumbar and femur with DXA(Dual-Energy X-Ray Absorptiometry) in order to diagnose bone disease such as osteopenia, osteoporosis. The purpose of this study is to identify the usefulness of QCT_BMD analyzed with low dose CT images on L-spine Bone SPECT/CT comparing with DXA_BMD. Materials and Methods: Fifty five women over 50 years old (mean 66.4 ± 9.1) who took the both examinations(L-spine Bone SPECT/CT with SIEMENS Intevo 16 and DXA scan with GE Lunar prodigy advance) within 90 days from April 2017 to July 2022, BMD, T-score and disease classification were analyzed. Three-dimensional BMD was analyzed with low dose CT images acquired on L-spine Bone SPECT/CT scan on Mindways QCT PRO^TM software and two-dimensional BMD was analyzed on DXA scan. Basically, Lumbar 1-4 were analyzed and the patients who has lesion or spine implants on L-spine were excluded for this study. Pearson's correlation analysis was performed in BMD and T-score, chi-square test was performed in disease classification between QCT and DXA. Results: On 55 patients, the minimum of QCT_BMD was 18.10, maximum was 166.50, average was 82.71 ± 31.5 mg/cm³. And the minimum of DXA-BMD was 0.540, maximum was 1.302, average was 0.902 ± 0.201 g/cm², respectively. The result shows a strong statistical correlation between QCT_BMD and DXA_BMD(p<0.001, r=0.76). The minimum of QCT_T-score was -5.7, maximum was -0.1, average was -3.2 ± 1.3 and the minimum of DXA_T-score was -5.0, maximum was 1.7, average was -2.0 ± 1.3, respectively. The result shows a statistical correlation between QCT T-score and DXA T-score (p<0.001, r=0.66). On the disease classification, normal was 5, osteopenia was 25, osteoporosis was 25 in QCT and normal was 10, osteopenia was 25, osteoporosis was 20 in DXA. There was under-estimation of bone decrease relatively on DXA than QCT, but there was no significant differences statistically by chi-square test between QCT and DXA. Conclusion: Through this study, we could identify that the QCT measurement with low dose CT images QCT from L-Spine Bone SPECT/CT was reliable because of a strong statistical correlation between QCT_BMD and DXA_BMD. Bone SPECT/CT scan can provide three-dimensional information also BMD measurement with CT images. In the future, rather than various exams such as CT, BMD, Bone scan are performed, it will be possible to provide multipurpose information via only SPECT/CT scan. In addition, it will be very helpful clinically in the sense that we can provide a diagnosis of potential osteoporosis, especially in middle-aged patients.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국산림과학회지
• /
• 제48권1호
• /
• pp.1-24
• /
• 1980

우리나라에서 도로(道路)의 녹화(綠化) 및 조경(造景)에 관(関)한 새로운 기술(技術)의 개발(開発) 및 발전(発展)을 위한 주요한 기초과제중(基礎課題中)의 하나는 현재(現在)까지 시행(施行)되고 있는 이 분야(分野)의 기술현황(技術現況)을 조사분석(調査分析)하여 현재(現在)의 기술수준(技術水準)을 평가(評価)하고, 이러한 자료(資料)와 선진국(先進国)의 기술(技術)을 종합(綜合)하여 우리나라의 실정(実情)에 적용(適用)할 수 있는 도로녹화조경기술기준(道路綠化造景技術基準)을 설정(設定)함에 있다고 본다. 도록녹화조경기술(道路綠化造景技術)은 도로(道路)의 녹화(綠化) 및 경관(景観)의 조성(造成)과 도로환경(道路環境)의 수복보전(修復保全)을 통하여 도로기능(道路機能)을 향상(向上)하기위하여 도로용지내(道路用地內)에 식물(植物) (녹색환경(綠色環境))을 도입(導入)하는 녹화(綠化) 및 조경기술(造景技術)로서 최근(最近)에 와서는 도로(道路)의 녹화조경면(綠化造景面)에서 뿐만 아니라 국민(国民)의 생활환경보전면(生活環境保全面)에서도 그 중요성(重要性)이 강조(强調)되고 있다. 1. 도로녹화조경(道路綠化造景)의 기본기술(基本技術)은 도로건설예정지내(道路建設豫定地內)에 있는 기존 유용자연식생(有用自然植生)을 최대한(最大限) 보존활용(保存活用)함은 물론 도로건설시(道路建設時) 또는 건설후(建設後)에 각종(各種) 조경식물(造景植物)을 식재육성(植栽育成)하는 것이므로, 이러한 도로식재(道路植栽)는 조속히 도로환경(道路環境)을 녹화(綠化)하고 보다 아름다운 도로경관(道路景観)을 조성(造成)하여 쾌적(快適)한 도로(道路)가 되도록 계획(計劃) 설계(設計) 시공(施工) 관리(管理)해야 될 것이다. 2. 도로녹화조경(道路綠化造景)의 기본대상(基本対象)은 도로녹화(道路綠化), 보도식재(步道植栽) 및 식수대(植樹帶) 환경시설대(環境施設帶) 및 꽃동산, 가로수등(街路樹等)의 식재(植栽) 및 조성(造成)과 도로(道路)비탈면의 안정녹화조경(安定綠化造景)이며 그밖에 중앙분리대(中央分離帶) 및 교통도(交通島), "인터체인지" 및 휴게시설등(休憩施設等)도 필수요소(必須要素)가 된다. 3. 도로녹화조경기술개발(道路綠化造景技術開発)의 기본방향(基本方向)은 도로교통(道路交通)의 안전(安全)과 쾌적성(快適性)을 높이고 연도(沿道)의 자연환경(自然環境)의 보전(保全) 및 생활환경(生活環境)의 녹화개선(綠化改善)에 기여하여 종합적(綜合的)인 도로기능(道路機能)을 발휘(発揮)할 수 있도록 설정(設定)해야 될 것이다. 4. 도로녹화조경(道路綠化造景)의 기본기능(基本機能)은 개개(個個) 수목(樹木)의 식재(植栽)로서 복수녹(複数綠)의 효용(効用)을 구성(構成)함에 있으며, 이러한 기본기능(基本機能)은 경관조성기능(景観造成機能)(경관조절기능(景観調整機能) 및 경관연출기능(景観演出機能)), 환경보전기능(環境保全機能)((재해방지기능(災害防止機能) 및 환경조화기능(環境調和機能)), 그리고 교통안전기능(交通安全機能) (유도기능(誘導機能), 사고방지기능(事故防止機能) 및 휴게조성기능(休憩助成機能)으로 대별(大別)하여 분석평가(分析評価)하는 제도(制度)가 수립(樹立)되어야 할 것이다. 5. 도로(道路)비탈면의 녹화조경시(綠化造景時)에는 특(特)히 교통안전성(交通安全性)의 확보(確保), 생활환경(生活環境)의 보전(保全), 경관(景観)의 조화(調和)와 창조(創造), 조경식물(造景植物)의 선택(選択) 및 생육기반(生育基盤)의 안정시(安定等)에 관(関)한 세부적인 조사(調査)가 선행(先行)되어야 한다. 6. 도로식재시공(道路植栽施工)에 있어서는 기본공정관리계획(基本工程管理計劃), 즉 품질관리(品質管理), 공정관리(工程管理), 안전관리(安全管理)에 관(関)한 사항(事項)은 물론 적기적수(適期適樹) 및 적지적수(適地適樹)가 되도록 해야 된다. 7. 녹화수(綠化樹)의 식재(植栽)(특(特)히 가로수(街路樹))에 있어서는 지주설치(支柱設置)의 재료(材料) 및 형식(型式), 시공(施工) 및 관리기술(管理技術)에 관(関)한 시험연구(試驗硏究)가 시급히 요망(要望)된다. 8. 도로녹화조경관리기술(道路綠化造景管理技術)의 기본방향(基本方向)은 풍부한 푸른경관(景観)과 쾌적(快適)한 도로환경(道路環境)을 지속적으로 확보(確保) 유지(維持) 향상(向上)할수 있도록 설정(設定)해야 될것이며, 이를 위해서는 수목(樹木)의 전정(剪定) 및 정자(整姿), 병충해(病虫害)의 방제(防除), 식재지(植栽地) 및 식재수(植栽樹)의 유지관리(維持管理)등에 대해서 정규적인 점검을 실시하여 필요(必要)한 조치를 제때에 취할수 있도록 하는 점검관리제(占検管理制)를 채택(採択)해야 될 것이다.