• ETRI Journal
• /
• v.42 no.4
• /
• pp.480-490
• /
• 2020

More than 42 000 fires occur nationwide and cause over 2500 casualties every year. There is a lack of specialized equipment, and rescue operations are conducted with a minimal number of apparatuses. Through-the-wall radars (TTWRs) can improve the rescue efficiency, particularly under limited visibility due to smoke, walls, and collapsed debris. To overcome detection challenges and maintain a small-form factor, a TTWR system-on-chip (SoC) and its architecture have been proposed. Additive reception based on coherent clocks and reconfigurability can fulfill the TTWR demands. A clock-based single-chip infrared radar transceiver with embedded control logic is implemented using a 130-nm complementary metal oxide semiconductor. Clock signals drive the radar operation. Signal-to-noise ratio enhancements are achieved using the repetitive coherent clock schemes. The hand-held prototype radar that uses the TTWR SoC operates in real time, allowing seamless data capture, processing, and display of the target information. The prototype is tested under various pseudo-disaster conditions. The test standards and methods, developed along with the system, are also presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2272-2278
• /
• 2011

It is essential to various evaluate about statistic character of the signal and additional noise for optimization of the optical communication system. We expressed various error probability with the m which was bandwidth and a bit numerical function and carried out performance evaluation of a PIN receiver. This research analyzed the receiving sensitivity of the PIN receiver and verified reception sensitivity through computer simulation in the optical communication system. As a result, the receiving sensitivity for PIN receiver are $9.2{\times}10^4$ photon/bit for given error probability.

• Journal of the Korea Society of Computer and Information
• /
• v.9 no.2
• /
• pp.97-104
• /
• 2004

As a channel of a DS-CDMA system is shared among several users, the receivers face the problem of MAI. Also the bandlimited channel leads to ISI. Both components are undesired, but unlike the additive noise process, which is usually completely unpredictable, their space-time structure helps to estimate and remove them. This paper investigates a DS-CDMA system with a fading multipath channel. The investigations have been separated into a channel estimation part and a reception part. In the estimation part of seperated two parts, the multipath parameters such as DOA and TOA are evaluated in this paper. In the part of receiver. we used these parameters and tested the performance of this receiver about space-time beamformers. To assess many different estimation techniques and beamformers, the simulation compared with theoretical values is performed.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.3
• /
• pp.264-269
• /
• 2013

Since MFC(macro-fiber composite) transducer has been developed, many researchers have tried to apply this transducer on SHM(structural health monitoring), because it is so flexible and durable that it can be easily embedded to various kinds of structures. The objective of this paper is to figure out the benefits and feasibility of applying MFC transducers to guided wave technique. For this, we have experimentally tested the performance of MFC patches as transmitter and sensors for excitation and reception of guided waves on the thin aluminum alloy plate. In order to enhance the signal accuracy, we applied the FIR filter for noise reduction as well as used STFT(short-time Fourier transform) algorithm to image the guided wave characteristics clearly. From the results, the guided wave generated based on MFC showed good agreement with its theoretical dispersion curves. Moreover, the ultrasonic Lamb wave techniques based on MFC patches in pitch-catch manner was tested for detection of surface notch defects of which depths are 10%, 20%, 30% and 40% of the aluminum plate thickness. Results showed that the notch was detectable well when the notch depth was 10% of the thickness or greater.

• Journal of Korean Association for Spatial Structures
• /
• v.17 no.4
• /
• pp.93-102
• /
• 2017

Wireless MEMS sensors have common features such as wireless communication, data measurement, embedded processing, battery-based self-power, and low cost, and increased measurement effectiveness. Wireless MEMS sensors enable efficient SHM without interfering with location because there is no requirement for triboelectric noise and cumbersome cables. However, there is little research on the communication distance with sensors and data. For instance, existing researches have limited communication distance experiments in civil engineering bridges. It is also necessary to investigate the characteristics of dynamic behavior and the communication distance of architectural structures with different wireless transmission/reception environments. Therefore, in a building structure with walls and slabs instead of open spaces, MEMS sensors and data loggers were used as distance experiments where communication disturbance between the vertical slab and the horizontal wall could actually be communicated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.1016-1023
• /
• 1998

DS-CDMA system requeires a power-efficient transmission and reception scheme to increase capacity. In this paper, coherent detection of DS-CDMA system with M-ary orthogonal signaling is considered, and multistage decision-directed channel estimator is proposed. The multistage decision-directed channel estimator is based on the fact that better channel estimation can be obtained by using the final decisions of the detector with a conventional decision-directed channel estimator. In this scheme, symbol detector and channel estimator operate algernaely. by simulation, it is shown that the proposed method achieves performance gain capare to conventional method, specially at low signal to noise ratio over fast time-variant channel with diversity.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2043-2046
• /
• 2002

This paper studies on Sun interference effects or Sun outage effects on C-band satellite reception signal for THAICOM2. The THAICOM2 satellite is at 78.5 degree East 〔co-located with THAICOM3〕. The down link station was located in Khon-kaen, longitude 102.83 degree East and latitude 16.43 degree North. The antenna diameter is 4.6 meters for C-band downlink station. Total 9 times of sun interference events were occurred during summer and fall of 2001 and these about 53 minutes altogether. The Maximum CM degradation of the THAICOM2 system was around 11 dB. The Sun interference events of 53 minutes of one year are 0.0122 percents of the C-band contact time when 21 hours of contact time is used f3r broadcasting a day.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.167-171
• /
• 2002

As a channel of a DS-CDMA system is shared among several users, the receivers face the problem of MAI. Also the multipath scenario leads to ISI. Both components are undesired, but unlike the additive noise process, which is usually completely unpredictable, their space-time structure helps to estimate and remove them. This paper investigates a DS-CDMA system with a fading multipath channel. The investigations have been separated into a channel estimation part and a reception part. In the first part, the estimation of multipath parameters(DOA, TOA) are considered, space-time beamformers(Decorrelating, Match-Filter, Wiener-Hopf) are performed in the second part. To assess many different estimation techniques and beamformers, the simulation compared with theoretical values is performed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.15 no.3
• /
• pp.381-389
• /
• 2015

A fully integrated multistandard multiband CMOS mobile TV tuner with small silicon area and low power consumption is proposed for receiving multiple mobile digital TV signals and FM signal. In order to reduce the silicon area of the multistandard multiband receiver, other RF front-end circuits except LNAs are shared and a local oscillator (LO) signal generation architecture with a single VCO for a frequency synthesizer is proposed. To reduce the low frequency noise and the power consumption, a vertical NPN BJT is used in an analog baseband circuits. The RF tuner IC is implemented in a $0.18-{\mu}m$ CMOS technology. The RF tuner IC satisfies all specifications for DVB-H/T, T-DMB, and ISDB-T with a sufficient margin and a successful demonstration has been carried out for DVB-H/T, T-DMB, and ISDB-T with a digital demodulator.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.150-161
• /
• 2016

Coordinated multi-point transmission (CoMP) techniques are being touted as enabling technologies for interference mitigation in next generation heterogeneous wireless networks (HetNets). In this paper, we present a comparative performance study of uplink (UL) CoMP algorithms for the 3GPP LTE HetNets. Focusing on a distributed and functionally-split architecture, we consider six distinct UL-CoMP algorithms: 1. Joint reception in the frequency-domain (JRFD) 2. Two-stage equalization (TSEQ) 3. Log-likelihood ratio exchange (LLR-E) 4. Symmetric TSEQ (S-TSEQ) 5. Transport block selection diversity (TBSD) 6. Coordinated scheduling with adaptive interference mitigation (CS-AIM) where JRFD, TSEQ, S-TSEQ, TBSD and CS-AIM are our main contributions in this paper, and quantify their relative performances via the post-processing signal-to-interference-plus-noise ratio distributions.We also compare the CoMP-specific front-haul rate requirements for all the schemes considered in this paper. Our results indicate that, with a linear minimum mean-square error receiver, the JRFD and TSEQ have identical performances, whereas S-TSEQ relaxes the front-haul latency requirements while approaching the performance of TSEQ. Furthermore, in a HetNet environment, we find that CS-AIM provides an attractive alternative to TBSD and LLR-E with a significantly reduced CoMP-specific front-haul rate requirement.