• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제12권5호
• /
• pp.2272-2278
• /
• 2011

It is essential to various evaluate about statistic character of the signal and additional noise for optimization of the optical communication system. We expressed various error probability with the m which was bandwidth and a bit numerical function and carried out performance evaluation of a PIN receiver. This research analyzed the receiving sensitivity of the PIN receiver and verified reception sensitivity through computer simulation in the optical communication system. As a result, the receiving sensitivity for PIN receiver are $9.2{\times}10^4$ photon/bit for given error probability.

• Journal of the Korea Safety Management & Science
• /
• 제16권2호
• /
• pp.147-155
• /
• 2014

This paper suggests a specific model that could efficiently improve the interaction and the interface between WMS(Warehouse Management System) terminal and PDA terminal through real time processing in manufacturing shop. The proposed model shows that the new method can more efficiently perform to reduce processing time for shipping and receiving, compared with the current approach. As a result of the certain test among the main server, WMS system, and PDA terminal, it is noted in case of the new proposed system that the effects of proposed model are as follows: (a) While the receiving lead time for carrying by the current method was 2 hours, the receiving lead time by the new method was 20 minutes. (b) While the shipping lead time for carrying by the current method was 1 hours, the shipping lead time by the new method was 15 minutes. (c) While the inventory rate of accuracy by the current method was 85%, the inventory rate of accuracy by the new method was 98%.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제43권3호
• /
• pp.41-50
• /
• 2006

This paper presents a novel ultrasonic sensor system to overcome limited distance detection range that can be measured only more than 30cm by single ultrasonic transducer. This is accomplished by separation of receiving capacitive ultrasonic transducer from transmitting capacitive ultrasonic transducer. And hardwares and software of the system are described in detail. The system makes very close range as well as long range detect by wireless precisely. Frequency of trigger pulse is 10Hz, but it is very low frequency for transmitting data in wireless module. Therefore, for triggering between receiver and transmitter, an algorithm for mixing and distinguishing trigger pulse from carrier pulse by software is proposed. The system is designed by common microprocessor 8051. The performance of the proposed method has been assessed through two types. The first, transmitting and receiving transducer are put on both sides. And then, distance of two point is measured as far as 0mm. Secondly, transmitting transducer send out ultrasonic pulse and measure the time of flight(TOF) until a first echo from an object detected by the detached receiving transducer. The distance between the detached transducers and a reflecting object is measured as far as 7cm. Images of measured ultrasonic waves and TOF for two methods presented to prove effectiveness of results.

• Journal of the Institute of Electronics and Information Engineers
• /
• 제51권9호
• /
• pp.46-53
• /
• 2014

In this paper, ku-band RF transceiver system is designed for the unmanned aerial vehicle(UAV) line-of-sight(LOS) datalink. The RF transceiver system is consisted of the transmitting and receiving unit, RF front-end unit, and high power amplification unit. The transmitting and receiving unit has the functions of frequency up/down converting and channel changing. The RF front-end unit has the functions of transmitting and receiving signal duplexing, antenna selection, small signal amplification, and frequency filtering excluding the receiving signal. The high power amplification unit has the functions of ku-band power amplification and transmitting power variation(High/Middle/Low/Mute). The frequency up/down converting of transmitting and receiving unit is designed by using the superheterodyne method. The RF transceiver system is designed to obtain the broadband and high linearity properties for the reliable transmission and reception of high data-rate and high speed data. Also, the channel changing function is designed to use selectively the frequency as the operation environment of UAV.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제41권12호
• /
• pp.85-91
• /
• 2004

The land mobile antenna for two-way communication using geostationary satellite consists of a transmitting and receiving systems. The transmitting system plays the role of sending the signal to the satellite while the receiving system does the role of receiving signal from the satellite and tacking the target satellite. Especially, the land mobile antenna for satellite communication must be met with the international regulation such as antenna pattern, transmitting power and tracking error to protect the damage of the neighbor satellites. On the other hand, this paper thoroughly examined a receiving system to satisfy a stable satellite tracking performance and antenna pattern specified by the international regulation for Ku-band geostationary satellite.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.25-30
• /
• 1999

This paper covers the development of a highly portable and low cost SPOT image data receiving system. We followed two design approaches. One is the software-based approach by which most of the real-time processing is handled by software. With the complete software-based design, it is simple to add a function for receiving any additional satellite data. Satellite-specific format handlers including error correction, decompression and decryption can easily be accommodated. On the other approach. we used a general hardware platform, IBM-PC and a low cost SCSI RAID (Redundant Away of Independent Disks), and therefore, we can make a low cost system.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.268-271
• /
• 2005

COMS (Communication, Ocean, and Meteorological Satellite) will be launch at end of year 2008. For receiving of COMS LRlT, KARl (Korea Aerospace Research Institute) finished design and software realization of COMS SDUS (Small Data Utilization System). SDUS is a small station receiving LRlT data for distribute satellite image, weather information, and so on. For the future project, KARl preparing COMS MDUS (Mass Data Utilization System) that can receiving large size of data over than 2M BPS (Bit Per Seconds) data size.

• Korean Journal of Remote Sensing
• /
• 제24권5호
• /
• pp.409-416
• /
• 2008

Recently, KARI developed "KOMPSAT-2 Terminal for Polar Station" which is high performance system newly required for stimulating KOMPSAT-2 application. The KOMPSAT-2 Terminal for Polar Station consists of one receiving system and two processing systems. The receiving system has been installed at Svalbard Satellite Station located at Norwegian Svalbard island. and the two receiving systems have been installed at Kongsberg Satellite Service AS located at Tromso Norway and Spot Image SA located at Toulouse France respectively. In this paper overall items of KOMPSAT-2 Terminal for Polar Station, which includes requirements, designs and operation concepts, are to be addressed with the verification result on its performance.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.804-809
• /
• 2002

Remote sensing division of satellite technology research center (SaTReC), Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. Developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies related to the ground receiving system fur high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development, the system has been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialised system for KOMPSAT-1. Currently the system is under customisation for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.

• Korean Journal of Remote Sensing
• /
• 제19권3호
• /
• pp.191-200
• /
• 2003

Remote sensing division of satellite technology research center (SaTReC) , Korea advanced institute of science and technology (KAIST) has developed a ground receiving and processing system for high resolution satellite images. The developed system will be adapted and operated to receive, process and distributes images acquired from of the second Korean Multi-purpose Satellite (KOMPSAT-2), which will be launched in 2004. This project had initiated to develop and Koreanize the state-of-the-art technologies for the ground receiving system for high resolution remote sensing images, which range from direct ingestion of image data to the distribution of products through precise image correction. During four years development from Dec. 1998 until Aug. 2002, the system had been verified in various ways including real operation of custom-made systems such as a prototype system for SPOT and a commercialized system for KOMPSAT-1. Currently the system is under customization for installation at KOMPSAT-2 ground station. In this paper, we present accomplished work and future work.