• The KIPS Transactions:PartC
• /
• v.15C no.4
• /
• pp.281-288
• /
• 2008

Recently, the advance of multimedia hardware has fostered the development of wireless multimedia sensor network which is able to ubiquitously obtain multimedia content such as image or audio from the environment. The multimedia data which has several characteristics such as large size and correlation between the data requires reliability in transmission. However, the existing solution which take the focus on the efficiency of network mainly, is not appropriate to transmit the multimedia data. In the paper, we proposes a reliable asynchronous image transfer protocol, RAIT. RAIT applies double sliding window method in node-to-node image tansfer to prevent the packet loss caused by network congestion. The double sliding window consists of one sliding window for the receiving queue, which is used for prevention of packet loss caused by communication failure between nodes and the other sliding window for the sending queue which prevents the packet loss caused by network congestion. the routing node prevents the packet loss and guarantees the fairness between the nodes by scheduling the packets based on the image non-preemptively. The RAIT implements the double sliding window method by cross layer design between RAIT layer, routing layer, and queue layer. The experiment shows that RAIT guarantees the reliability of image transmission compared with the existing protocol.

• Journal of Internet Computing and Services
• /
• v.17 no.6
• /
• pp.17-23
• /
• 2016

In the future network such as Internet of Things (IoT), the number of computing devices are expected to grow exponentially, and each of the things communicates with the others and acquires information by itself. Due to the growing interest in IoT applications, the broadcasting in Opportunistic ad-hoc networks such as Machine-to-Machine (M2M) is very important transmission strategy which allows fast data dissemination. In distributed networks for IoT, the energy efficiency of the nodes is a key factor in the network performance. In this paper, we propose a fuzzy logic based probabilistic multi-hop broadcast (FPMCAST) algorithm which statistically disseminates data accordingly to the remaining energy rate, the replication density rate of sending node, and the distance rate between sending and receiving nodes. In proposed FPMCAST, the inference engine is based the fuzzy rule base which is consists of 27 if-then rules. It maps input and output parameters to membership functions of input and output. The output of fuzzy system defines the fuzzy sets for rebroadcasting probability, and defuzzification is used to extract a numeric result from the fuzzy set. Here Center of Gravity (COG) method is used to defuzzify the fuzzy set. Then, the performance of FPMCAST is evaluated through a simulation study. From the simulation, we demonstrate that the proposed FPMCAST algorithm significantly outperforms flooding and gossiping algorithms. Specially, the FPMCAST algorithm has longer network lifetime because the residual energy of each node consumes evenly.

• Journal of Distribution Science
• /
• v.12 no.8
• /
• pp.91-102
• /
• 2014

Purpose - Today, the importance of the service industry has increased. Social welfare businesses that follow the non-profit principle have neglected the distribution of the service. However, an intangible service, when produced and consumed, has a similar service delivery system to common service distribution and social welfare. Therefore, the author has assumed the efficiency of the service delivery system of social welfare to be equivalent to the service distribution industry. Hence, various kinds of social welfare services for the prevention of elderly suicide, from the perspective of distribution, are discussed. Studies on generational relations have thus far investigated depression from parent-children conflict, and satisfaction with their lives. Studies on the relationship between family solidarity and elderly suicide by analyzing existing social problems are rare. This study investigated the effects of family solidarity between old parents and adult children upon elderly suicide by analyzing serious psychological and social problems. This study revealed basic measures for elderly suicide prevention through services that could elevate family solidarity from the perspective of social welfare service distribution. Research design, data, and methodology - The subjects were 468 elderly, 65 years or older, at 18 senior welfare centers and halls for the elderly at Seoul and Gyeonggi-do. Questionnaire surveys, excluding invalid answers, were analyzed. Convenience sampling was used from February 5, 2014 to March 5, 2014. The findings were: First, women and those having spouses with advanced educational backgrounds and social activities had primary solidarity such as contact solidarity, affectionate solidarity, functional solidarity (giving help), and functional solidarity (receiving help). In addition, those who had good health, from a subjective point of view, had more solidarity. Second, the elderly who were men and single, and who had poorer educational backgrounds thought of suicide, lacked social activities, and had poor health, from a subjective point of view. Third, family solidarity between old parents and adult children had significantly negative influence on the suicidal ideation of the elderly. Results - The study revealed the following implications. First, the preparation for old age should consider not only economic welfare but also the psychological welfare due to the relationship with children. Second, the phenomenon of elderly suicide because of a lack of family solidarity could increase national loss and have great influence upon welfare in old age. Therefore, planning of welfare services for the elderly should consider the value of relationships with children to improve the psychological welfare of the elderly. Third, the social expenses of government-oriented support for parents should be discussed from the people's point of view. Conclusions - The subjects of the study comprised the elderly at Seoul and Gyenggi-do; therefore, it would be difficult to extrapolate the findings to all the elderly in the nation. The subject visited senior welfare centers as well as halls for the elderly; therefore, it would be difficult to assume that the trends were representative of the elderly in the nation.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.269-274
• /
• 2021

In secret communication, steganography is the sending and receiving of secret messages without being recognized by a third party. In the spatial domain method bitwise information is inserted into the virtual bit plane of the decomposed pixel values of the image. That is, the bitwise secret message is sequentially inserted into the least significant bit(LSB) of the image, which is a cover medium. In terms of application, the LSB is simple, but has a drawback that can be easily detected by a third party. If the upper bit plane is used to increase security, the image quality may deteriorate. In this paper, I present a method for concealing Hangul secret messages in image steganography based on the lo-th bit plane and the decomposition of modified pixel intensity values. After decomposing the Hangeul message to be hidden into choseong, jungseong and jongseong, then a shuffling process is applied to increase confidentiality and robustness. PSNR was used to confirm the efficiency of the proposed method. It was confirmed that the proposed technique has a smaller effect in terms of image quality than the method applying BCD and Fibonacci when inserting a secret message in the upper bit plane. When compared with the reference value, it was confirmed that the PSNR value of the proposed method was appropriate.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2022

LID technologies are capable of mitigating the negative impacts of non-point source (NPS) pollution generated in different land uses. Apart from the increase in point and non-point pollutant generation, highly developed and paved areas generally affect microclimate conditions. This study evaluated both the efficiency of Low Impact Development (LID) facilities in treating NPS pollutant loads as well as the unit pollutant loads (UPL) generated in various urban features (such as parking lots and highways). This investigation also looked at how LID technology helped to alleviate Urban Heat Island (UHI) conditions. As compared to the typical unit pollutant loads in South Korea, the unit pollutant loads at Kongju National University were relatively low, because of no classes, limited vehicular transmission, and low anthropogenic activities during vacation. After receiving treatment from the LID facilities, the effluent pollutant loads were significantly decreased. The sedimentation in filtration mechanisms considerably reduced the pollutant fractions in the influent. Additionally, it was shown that LID facilities' mean surface temperatures are up to 7.2℃ lower than the nearby paved environment, demonstrating the LID systems reducing the UHI impact on an urban area.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.2
• /
• pp.13-29
• /
• 2003

Web-mail system is worthy of note as a next generation e-mail system for its mobility and easiness. But many web-mail system does not have any kind of security mechanism. Even if web-mail system provides security services, its degree of strength is too low. Using these web-mail systems, the e-mail is tabbed, modified or forged by attacker easily. To solve these problems, we design and implement secure web-mail system based on the international e-mail security standard S/MIME in this thesis. This secure web-mail system is composed of server system and client system The server system performs basic mail functions - sending/receiving the mails, storing the mails, and management of user information, etc. And the client system performs cryptographic functions - encryption/decryption of the mails, digital signing and validation, etc. Because client system performs cryptographic functions this secure web-mail system gives its reliability and safety, and provides end-to-end security between mail users. Also, this secure web-mail system increase system efficiency by minimize server load.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.19-28
• /
• 2021

Corrosion is the degradation of metals by reaction with the environment. It is difficult to completely remove. Corrosion proceeds rapidly after the protective barrier is destroyed, and several reactions occur that alter the composition and properties of the metal surface and local environments, such as diffusion of metal cations into the matrix, the formation of oxides, and local pH changes. The study of corrosion of steel and iron is of theoretical and practical interest and is receiving considerable attention. Acid solutions, which are widely used in industrial pickling, acid descaling, cleaning and acidification of oil wells, require the use of corrosion inhibitors to suppress corrosion attacks on metallic materials. Physical removal of rust requires expensive special equipment, and chemical removal of it can cause corrosion or shorten the life of the metal. In this study, an eco-friendly rust cleaner was developed using cosmetics and food materials by applying the concept of perm reducing agent and chelate, and applied to remove rust from industrial and hot water pipes and various industrial devices. As a result, it was found that rust cleaners remove rust more effectively and safely compared to conventional treatment methods. At the same time, the rust removal efficiency was 1.75 to 2.5 times better for industrial piping and 1.56 to 2.2 times better for boiler hot water than conventional methods.

• Journal of Advanced Navigation Technology
• /
• v.26 no.3
• /
• pp.160-165
• /
• 2022

In this paper, we have proposed a magnetic resonant 6.78MHz WPT(wireless power transfer) technique which can be applied to a fixed transmitter and a receiver of varying relative distance and coil alignment, Power transmission characteristics are studied with the relative distance and misalignment ration of coil area between the transmitting and receiving coils. The coils are designed with the size of 60×80mm² by direct feeding method, and the characteristics are derived with the maximum relative distance of 50mm and horizontal area misalignment state of 0-40mm misalignment of coil center axis in the XY plane. The power transmission characteristics are compared between the 3D EM simulation and the measured data, and the power transmission shows larger than -3dB performance with the vertical distance of up to 30mm and 50% area misalignmment ratio. This work showsthe transmission characteristics according to relative distance and misalignment state between the cols and that direct feeding has advantage for the short relative distance and small misalignment ratio.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.10
• /
• pp.11-17
• /
• 2022

In this paper, a model that can increase the efficiency of work in arranging interior furniture by applying augmented reality technology was studied. In the existing system to which augmented reality is currently applied, there is a problem in that information is limitedly provided depending on the size and nature of the company's product when outputting the image of furniture. To solve this problem, this paper presents an AR labeling algorithm. The AR labeling algorithm extracts feature points from the captured images and builds a database including indoor location information. A method of detecting and learning the location data of furniture in an indoor space was adopted using the CNN technique. Through the learned result, it is confirmed that the error between the indoor location and the location shown by learning can be significantly reduced. In addition, a study was conducted to allow users to easily place desired furniture through augmented reality by receiving detailed information about furniture along with accurate image extraction of furniture. As a result of the study, the accuracy and loss rate of the model were found to be 99% and 0.026, indicating the significance of this study by securing reliability. The results of this study are expected to satisfy consumers' satisfaction and purchase desires by accurately arranging desired furniture indoors through the design and implementation of AR labels.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.789-795
• /
• 2023

Digital-Twin are recognized as an important core technology for the realization of Smart Factories by simulating and optimizing the monitoring and predictive maintenance of manufacturing equipment and the operation of production lines in a digital space. To implement this system, we adopt the IEC62541-based OPC-UA (Open Platform Communications Unified-Architecture) Protocol, which has strengths in interoperability and connectivity between heterogeneous platforms. Therefore, In this paper, We designed and implemented an IIoT(Industry Internet of Things) system that connects heterogeneous platforms, and developed an OPC-UA simulator based on IEC 62541. We will present whether the data will be applied to the Digital-Twin Platform and whether it will work, and proceed with performance tests and evaluations. We evaluate the operation performance and OPC-UA performance of the Digital-Twin platform lightened by the proposed device, and present the optimal IEC62514-based simulator system. We proceeded with the performance evaluation of sending and receiving data with OPC-UA wrapping with the proposed simulator, and found that a lightweight Digital-Twin platform can be operated. This research can apply the OPC-UA protocol for implementing smart factory and meta-factory in the manufacturing shop floor with limited resources, avoiding the waste of time and space on the shop floor through the OPC-UA simulator. We expect that this will contribute to a significant improvement in efficiency by minimizing.