• Journal of Sensor Science and Technology
• /
• v.14 no.2
• /
• pp.78-84
• /
• 2005

A contactless recharging device for totally implantable middle ear systems has been designed as a pillow type that the user can recharge the implanted battery with taking a rest. The proposed device uses the electromagnetic coupling between the transmitting coil and the receiving coil. To supply sufficient power for the implanted circuits, each coil uses LC resonance and the implanted device uses voltage doubler. A power MOSFET is used for switching the DC voltage of LC parallel circuit and the switching frequency demands on a programmable frequency generator which is controlled by microcontroller. In order to improve the electromagnetic coupling efficiency at specific positions of coil which may vary with the displacement of head, the optimal location of receiving coil was studied, and the 5 transmitting coils in a pillow for recharging the implant module was designed. From such a recharging experiment, it was found that the proposed device could provide the sufficient operating voltage within the distance of 4 cm between pillow and the implanted device.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.2
• /
• pp.173-183
• /
• 2010

In a split beam echo sounder, the transducer design needs to have minimal side lobes because the angular position and level of the side lobes establishes the usable signal level and phase angle limits for determining target strength. In order to suppress effectively the generation of unwanted side lobes in the directivity pattern of split beam transducer, the spacing and size of the transducer elements need to be controlled less than half of a wavelength. With this purpose, a 50 kHz tonpilz type transducer with a half-wavelength diameter in relation to the development of a split beam transducer was designed using the equivalent circuit model, and the underwater performance characteristics were measured and analyzed. From the in-air and in-water impedance responses, the measured value of the electro-acoustic conversion efficiency for the designed transducer was 51.6%. A maximum transmitting voltage response (TVR) value of 172.25dB re $1{\mu}Pa/V$ at 1m was achieved at 52.92kHz with a specially designed matching network and the quality factor was 10.3 with the transmitting bandwidth of 5.14kHz. A maximum receiving sensitivity (SRT) of -183.57dB re $1V/{\mu}Pa$ was measured at 51.45kHz and the receiving bandwidth at -3dB was 1.71kHz. These results suggest that the designed tonpilz type transducer can be effectively used in the development of a split beam transducer for a 50kHz fish sizing echo sounder.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.3
• /
• pp.318-325
• /
• 2019

As satellite communication technology with high efficiency and spatiality evolves, demands of customer for efficient and effective satellite broadcasting services are increasing due to interval reduction of the between satellites, and the limited radio-frequency spectrum resources. Recently, research on antenna that it possible to simultaneously receive multiple signal from various satellites while holding maintain the same number of previous reception channels by using the single reflector has been ongoing. It is necessary to be able to simultaneously receive signals from various satellites in order to maintain the same number of previous reception channels. We suggest a multiband antenna which can be simultaneously and independently receiving Ku band and Ka band satellite broadcasting signals transmitted by three adjacent satellites. We have designed and simulated using commercial design tools TICRA CHAMP and CST MWS to meet the target specifications. It appears that the antenna has -10 dB return loss, and more than 40 dBi directivity gain in Ku band and Ka band respectively.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.347-353
• /
• 2023

Currently, soldiers enlisted in the military (Army) are receiving measurements (automatic, manual) of body parts and trying on sample clothing at boot training centers, and then receiving clothing in the desired size. Due to the low accuracy of the measured size during the measurement process, in the military, which uses a relatively more detailed sizing system than civilian casual clothes, the supplied clothes do not fit properly, so the frequency of changing the clothes is very frequent. In addition, there is a problem in that inventory is managed inefficiently by applying the measurement system based on the old generation body shape data collected more than a decade ago without reflecting the western-changed body type change of the MZ generation. That is, military uniforms of the necessary size are insufficient, and many unnecessary-sized military uniforms are in stock. Therefore, in order to reduce the frequency of clothing replacement and improve the efficiency of stock management, deep learning-based automatic measurement of body size, big data analysis, and machine learning-based "Personalized Combat Uniform Automatic Recommendation System for Enlisted Soldiers" is proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.3
• /
• pp.309-313
• /
• 1996

This experiment was carried out to investigate the effect of rumen-protected lysine (RPLys) on growth rate, feed efficiency and plasma amino acid concentrations in sheep. RPLys was supplemented at the level of 0% ($T_1$), 0.2% ($T_2$) and 0.4% ($T_3$) of total DMI with 24 sheep in a 56 day feeding trial. The results are summarized as follows: 1. live weight gain of sheep in groups $T_1$, $T_2$ and $T_3$ was 219, 216 and 244 g/d, and was significantly (p < 0.05) higher for $T_3$ through the entire experiment. 2. Feed intake was not affected by RPLys supplementation. 3. The group fed $T_3$ had a significantly (p < 0.05) better feed efficiency than the groups fed $T_1$ and $T_3$. The response of $T_3$ was higher in growing period II of feeding low protein basal diet than in period I. 4. Plasma lysine concentrations tended to be higher with supplementing RPLys, but there were no differences between $T_2$ and $T_3$. 5. Supplementing RPLys in the diets increased plasma concentrations of arginine, asparagines, threonine, serine, valine and leucine compared with sheep receiving no RPLys. In contrast, plasma histidine was lower in sheep fed the supplementing RPLys than fed the diet $T_1$ with significant (p < 0.05) difference.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.752-757
• /
• 2009

In the last decade, many methods such as greet chamber, reservoir, or debris barrier, have been utilized to manage and prevent muddy water problem. The Vegetative Filter Strip (VFS) has been thought to be one of the most effective methods to trap sediment effectively. The VFS are usually installed at the edge of agricultural areas adjacent to stream or drainage ditches, and it has been shown that the VFS effectively removes pollutants transported with upland runoff. But, if the VFS is installed without any scientific analysis of rainfall-runoff characteristics, soil erosion, and sediment analysis, it may not reduce the sediment as much as expected. Although Soil and Water Assessment Tool (SWAT) model has been used worldwide for many hydrologic and Non-Point Source Pollution (NPSP) analysis at a watershed scale. but it has many limitations in simulating the VFS. Because it considers only 'filter strip width' when the model estimates sediment trapping efficiency, and does not consider the routing of sediment with overland flow option which is expected to maximize the sediment trapping efficiency from upper agricultural subbasin to lower spatially-explicit filter strip. Therefore, the SWAT overland flow option between landuse-subbasins with sediment routing capability was enhanced with modifications in SWAT watershed configuration and SWAT engine. The enhanced SWAT can simulate the sediment trapping efficiency of the VFS in the similar way as the desktop VFSMOD-w system does. Also it now can simulate the effects of overland flow from upper subbasin to reflect the increased runoff volume at the receiving subbasin, which is what is occurring at the field if no diversion channel is installed. In this study, the enhanced SWAT model was applied to small watershed located at Jaun-ri in South Korea to simulate diversion channel and spatially-explicit VFS. It was found that approximately sediment can be reduced by 31%, 65%, 68%, with diversion channel, the VFS, and the VFS with diversion channel, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.4
• /
• pp.601-605
• /
• 1993

This study was purposed to investigate the efficiency of protein utilization of rapeseed meal (RSM) and formaldehyde-treated RSM (TRSM) by sheep, and their influence on performance of growing heifers. Experiment 1 was conducted according to a double $3{\times}3$ Latin square design involving sex yearling Hu Sheep and three experimental diets. All diets contained 600 g ammoniated rice straw and 200 g concentrate mixture. Three dietary treatments were: (1) 100 g RSM + 40 g soybean meal (URUS), (2) 100 g TRSM + 40 g soybean meal (TRUS) and (3) 100 g TRSM + 40 g treated soybean meal (TRTS). Apparent nitrogen digestibility was significantly higher for diet TRUS than that for URUS or TRTS (p<0.05), but with no significant difference between URUS and TRTS (p>0.05). Proportion of nitrogen retention (NR) to the digestible nitrogen intake for diet TRUS and TRTS was 25.57 (p<0.05) and 23.44% (p<0.05) higher than that for URUS respectively. As a result, proportion of NR to nitrogen intake for diet TRUS and TRTS was 34.74 (p<0.05) and 23.78% (p<0.05) higher than that for URUS respectively. Experiment 2 was conducted with 59 Holstein heifers. They were 12-20 months of age at the start of the trial. The experiment was a $2{\times}2$ factorial trial in which the heifers were given the ammoniated rice straw ad libitum and 1.5 kg hay, and supplemented with either RSM or TRSM at a daily allowance of 1.2 or 1.8 kg per day. The live weight gains for heifers receiving 1.2 and 1.8 kg/d of RSM or TRSM were 0.491 and 0.556 or 0.564 and 0.665 kg/d, respectively. The results suggest that formaldehyde treatment can effectively improve the efficiency of protein utilization of rapessed meal and cattle's performance.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.70-74
• /
• 2015

In this paper, two-dimensional resonant transmitter and receiver for WPT is designed and implemented using method that use $90^{\circ}$ phase shifted input power to orthogonal transmitter. Mutual inductance is minimized by using proposed each orthogonal coil of receiver and the method that inputs $90^{\circ}$ phase shifted power is used to radiate magnetic energy into two dimension. This method facilitates two dimensional resonant WPT by solving power efficiency degradation problem according to location in general WPT. The resonance frequency is 6.78 MHz and the distance between transmitting and receiving resonator is 200 mm. The transfer efficiency of the proposed wireless power transfer system is higher than 40 % at all direction.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.671-676
• /
• 2013

Recently, there are many efforts focused on development of Redox Flow Battery (RFB) for large energy storage system. Economical hydrocarbon membranes alternative to fluorinated membranes for RFB membrane are receiving attention. In this study, characteristics of poly(arylene ether sulfone) (PAES) were compared with expensive fluorinated membrane at VRB (Vanadium Redox Flow Battery) operation condition. Permeability of vanadium ion through membrane, ion exchange capacity (IEC), change of OCV, swelling, charge-discharge curves and energy efficiency were measured. PAES membrane showed lower permeability of vanadium ion, higher IEC and then higher energy efficiency compared with Nafion 117 membranes.

• International Journal of Automotive Technology
• /
• v.4 no.2
• /
• pp.87-94
• /
• 2003

Recent advancements of permanent magnet (PM) materials and solid-state devices have contributed to a substantial performance improvement of permanent magnet machines. Owing to the rare-earth PMs, these motors have higher efficiency, power factor, output power per mass and volume, and better dynamic performance than induction motors without sacrificing reliability. Not surprisingly, they are continuously receiving serious considerations for a variety of automotive and propulsion applications. An electric vehicle (EV) requires a high-effficient propulsion system having a wide operating range and a capability of generating a high peak torque for short durations. The improvement of torque-speed performance for these systems is consequently very important, and researches in various aspects are therefore being actively pursued. A great emphasis has been placed on the efficiency and optimal utilization of PM machines. This requires attention to many aspects related to the machine design and overall performance. In this respect, the prediction of iron losses is particularly indispensable and challenging, especially for drives with a deep field-weakening range. The objective of this paper is to present iron loss estimations of a PM motor over a wide speed range. As aforementioned, in EV applications core losses can be significant during high-speed operation and it is imperative to evaluate these losses accurately and take them into consideration during the motor design stage. In this investigation, the losses are predicted by using an analytical model and a 2D time-stepped finite element method (FEM). The results from different analytical approaches are compared with the FEM computations. The validity of each model is then evaluated by these comparisons.