• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.1093-1098
• /
• 2001

The interior sound pressure level of the Korean high speed train is predicted using ray acoustic method. The motor car, motorized car and passenger cabin are investigated under the environment of passing open countryside and inside tunnel Calculated sound levels of KHST are compared with the those of KTX prototype which vehicle shows similar acoustic behavior with KHST for the purpose of assuring the calculated data. In order to reduce the calculated SPL in systematic way, contribution analysis of sound sources and sensitivity analysis of concerning wall's transmission loss on the SPL of the designated receiving points are carried out. Finally, practical design suggestions are proposed.

• Journal of the Korea Concrete Institute
• /
• v.12 no.2
• /
• pp.99-107
• /
• 2000

This research investigates experimentally an effect on the properties of the high flowing concrete to be poured in the under-ground slurry wall of Inchon LNG receiving terminal(#213,214-TK) according to variations of concrete materials. Variables for sensitivity test were selected items as followings. 1) Concrete temperature (3cases), 2) Unit water (5cases), 3) Fineness modulus of fine aggregate (5cases), 4) Particle size of lime stone powder (3cases), 5) Replacement ratio of blast-furnace slag (4cases) and 6) Addition ratio of high range water reducing agent (5cases). And fresh conditions of the super flowing concrete should be satisfied with required range including slump flow(65$\pm$5cm), 50cm reaching time of flow(4~10sec), V-lot flowing time(10~ 20sec), U-box height(min. 300mm) and air content(4$\pm$1%). As results for sensitivity test, considered flow-ability, self-compaction and segregation resistance of the high flowing concrete, material variations and conditions of fresh concrete should be satisfied with the range as follwings. 1) Concrete temperature are 10~2$0^{\circ}C$(below 3$0^{\circ}C$), 2) Surface moisture of fine aggregate is within $\pm$ 0.6%, 3) Fineness modulus of fine aggregate is 2.6$\pm$0.2, 4)Replacement ratio of blast-furnace slag is 45~50% and 5) Addition ratio of high range water reducing agent is within 1%. Based on the specification for quality control, we successfully finished concrete pouring on the under-ground slurry wall having 75,000㎥(#213,214-TK) and accumulated real date in site.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.137-142
• /
• 2018

This paper is studied, as basic research for measuring the accurate fuel amount of the CNG tank by using the transmit-receive ultrasonic sensor, the receiving sensitivity according to changed the pressure inside the tank and the contact surface of the ultrasonic sensor is analyzed. Measurement was carried out while changing the contact surface of the tank and the sensor to three shapes of Point, Line, and Surface and charging the pressure in the tank at an interval of 1 bar from 0 bar to 5 bar. Experiment results, as the pressure in the tank increased the tendency of the received signal value of the ultrasonic sensor to decrease was confirmed. As the contact area between the tank and the sensor increased, the value of the received signal increased, but the noise also increased. The results of experiment, it is judged that accuracy can be improved by changing the contact surface of the sensor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.219-225
• /
• 2013

Separate and layered transmitting and receiving spiral coil arrays had been used for the optimized individual applications of magnetostrictive type long-range ultrasonic testing. In this study, it was demonstrated that when taking advantages of the spiral coils with the leg width reduced to be half of the previous one and of the empty spaces due to the decrease of leg width, the transmitting and receiving coil array can be arranged to form a single layer structure allowing more easy use and fabrication. Because of the number of turns of the receiving coils that is proportional to their leg width, the sensitivity of the single layer coil array was about half that of the corresponding double layer coil array while it allowed the receiving amplifier to get faster recovery from a saturation due to the main bang echo. It was also found that the two types of coil arrays have almost the same performances in the view points of signal-to-noise ratio and directivity control.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.689-692
• /
• 2012

Objective: To investigate correlations between adenosine triphosphate chemotherapy response assay (ATP-CRA) and clinical outcomes after ATP-CRA-based chemotherapy for drug selection in patients receiving intravesical chemotherapy to prevent recurrence of superficial bladder cancer after surgery. Methods: The chemosensitivities of 12 anticancer drugs were evaluated, including 5-Fu ADM, and EPI, using ATP-CRA and primary tumor cell culture in 54 patients. In addition, a further 58 patients were treated according to clinical experience. Differences in post-chemotherapeutical effects between drug sensitivity assay and experience groups were compared. Results: The evaluable rate of the test was 96.3%, the clinical effective rate was 80.8%, the sensitivity rate was 97.6% (41/42), the specificity was 20%, the total predicting accuracy was 74.3%, the positive predictive value was 83.7% (41/49), the negative predictive value was 66.7% (2/3); in the drug sensitivity test group, the clinical effective rate was 80.8%, the experience group response rate was 63.8%, with a significant difference in clinical effects between the ATP-based sensitivity and experience groups (${\chi}^2$=7.0153, P<0.01). Conclusion: ATP-CRA is a stable, accurate and potentially practical chemosensitivity test providing a predictor of chemotherapeutic response in patients with superficial bladder cancer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2205-2209
• /
• 2009

Nitrate contamination of groundwater is a wide-spread problem in both New Zealand and South Korea and has lead to eutrophication of receiving lakes and rivers. Denitrification in groundwater has the potential to reduce inputs of N to these receiving waters but quantification of the amount of denitrification taking place is difficult. A series of denitrification measurements have been carried out in the field at selected groundwater locations in New Zealand using a recently developed re-circulating well technique to increase sensitivity. This is an ongoing project and the methodology and sites are described and some preliminary results discussed. An overview of the collaborative research programme on in-situ groundwater processes (in which this denitrification project is a component) is provided.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.10a
• /
• pp.268-271
• /
• 2004

Non-contact technique should be developed for receiving ultrasonic wave for on-line monitoring of processing defects of fiber reinforced composites, since couplant must be applied on composite materials when conventional ultrasonic testing technique was used. Restriction of conventional ultrasonic testing technique was proven by transmitting and receiving ultrasonic wave on CFRP in various direction of wave propagation with various incident angle of ultrasonic beam. Air-coupled transducer and laser interferometer were applied for non-contacting reception of ultrasonic wave in fiber reinforced composite materials. Air-coupled transducer has optimal sensitivity and frequency band of 300kHz has homogeneous characteristics on direction of wave propagation.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.175-182
• /
• 2016

For application to several MHz photoacoustic imaging systems, a needle hydrophone was designed and fabricated by using PMN-PZT piezoelectric single crystal, and its characteristics were evaluated through comparison with a commercial PVDF(Polybinylidene Fluoride) hydrophone of which receiving sensitivity is known. The simulation using the KLM model results show that the peak receiving impulse response for $50{\Omega}$ terminating impedance of the fabricated hydrophone is -261.6 dB re $1V/{\mu}Pa$ and the frequency response is relatively flat over 2 ~ 12 MHz with fluctuation less than 5 dB. The measurement results using tone burst signals also show that it has higher (ave. 10.9 dB) sensitivity than the commercial hydrophone in 2 ~ 8 MHz, and the receiving sensitivity of $-255.8{\pm}2.8$ dB re $1V/{\mu}Pa$ was measured for the fabricated hydrophone. In addition, it is known that the photoacoustic signals and the image of a hair obtained by a mechanical scanned photoacoustic imaging system with the fabricated hydrophone were bigger and better than those obtained with the commercial hydrophone.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.214-221
• /
• 2019

In this paper, a temperature dependent acoustic receiving characteristics of underwater acoustic sensor is studied by theoretical and experimental investigations. Two different types (low mid frequency sensor and high frequency sensor) of underwater acoustic sensors are designed with different configuration of baffle and conditioning plate. The temperature dependent characteristics of the acoustic sensors are investigated within the temperature range from $-2^{\circ}C$ to $35^{\circ}C$. The material properties of the piezoelectric ceramics, molding and baffle, which are the primary materials of the acoustic sensors, are measured with temperature change. The temperature dependent RVS (Receiving Voltage Sensitivity) characteristics of the acoustic sensors are simulated by using the measured material properties. The RVS changes of the acoustic sensors are measured by changing temperature in the watertank where the acoustic sensors are installed. The measured and the simulated data show that the temperature dependent characteristics of the acoustic sensors are mainly dependent for the sound speed changes of the molding material.

• The Journal of Korean Academy of Sensory Integration
• /
• v.2 no.1
• /
• pp.33-42
• /
• 2004

Objective : To evaluate the sensory processing ability in relation to parenting stress and find the sensory modulation areas affecting the parenting stress in disabled children Methods : Parents of 124 children with disabilities between 3 to 7 years receiving occupational therapy in Seoul and Gyeonggi-do made out the questionnaire and in items of questionnaire, Short Sensory Profile and Parenting Stress Index of short form was included. Results : Among general information, parenting stress of parents had significant correlation with the degree of disability and correlation with the lower level 2 of Parenting Stress Index. The more sensory processing disability was increased, the more parenting stress was increased. Parenting stress showed the significant correlation with movement sensitivity area and under-responsiveness/behaivor area seeking specific stimulation among sensory processing areas and had significant correlation with tactile sensitivity and auditory filtering. Sensory processing areas which affect the most the Parenting Stress were movement sensitivity and under-responsiveness/behaivor area seeking the specific behavior among sensory control disabilities. Conclusion : The parenting stress of parents with the disabled children had the correlation with sensory processing ability. The difficulty of sensory processing increased the parenting stress. Hence, in order to improve children's sensory processing ability, the appropriately coping program should be developed and the appropriate intervention for improvement of sensory processing ability of children will be necessary.