• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.1
• /
• pp.9-16
• /
• 2017

This study investigated recognition of food labeling of high school students (males 94 and females 85) in Yongin region. Recognition of food labeling was very high at 81.6%. For checking food labeling at the time of purchasing, 53.6% of the respondents always checked and the main reason was healthier food choice (49.2%). Satisfaction of food labeling was very low at 18.4%. In spite of very low satisfaction, 70.9% of respondents recognized necessity for education of food labeling. In terms of education method, respondents preferred 'school lecture' the most with 48.6%, which are in the following order: TV/newspaper/journal/book (37.4%) > internet lecture (10.1%) > education from parents (3.9%). Moreover, 83.2% of respondents answered 'positive change (ex. checking food labeling)' after getting education. Consequently, high school students had low level of utilization of food labeling at the time of purchasing. However, they showed high level of perception and educational need of food labeling as well as possibility of positive change after receiving education. Therefore, appropriate school education for food labeling may be able to lead a healthy eating habit of high school students.

• Industrial Engineering and Management Systems
• /
• v.6 no.2
• /
• pp.136-145
• /
• 2007

The selection of suppliers and the determination of order quantities to be placed with those suppliers are important decisions in a supply chain. In this research, a non-linear mixed integer programming model is presented to select suppliers and determine the order quantities. The model considers the purchasing cost which takes into account quantity discount, the cost of transportation, the fixed cost for establishing suppliers, the cost for holding inventory, and the cost of receiving poor quality parts. The capacity constraints for suppliers, quality and lead-time requirements for the parts are also taken into account in the model. Since the purchasing cost, which is a decreasing step function of order quantities, introduces discontinuities to the non-linear objective function, it is not easy to employ traditional optimization methods. Thus, a heuristic algorithm, called particle swarm optimization (PSO), is used to find the (near) optimal solution. However, PSO usually generates initial solutions randomly. To improve the PSO solution quality, a heuristic procedure is proposed to find an initial solution based on the average unit cost including transportation, purchasing, inventory, and poor quality part cost. The results show that PSO with the proposed initial solution heuristic provides better solutions than those with PSO algorithm only.

• Journal of Information Technology Applications and Management
• /
• v.15 no.1
• /
• pp.261-270
• /
• 2008

Wireless Mesh Networks (WMNs) have emerged as one of the new hot topics in wireless communications. WMNs have been suggested for use in situations in which some or all of the users are mobile or are located in inaccessible environments. Unconstrained transmission in a WMN may lead to the time overlap of two or more packet receptions, called collisions or interferences, resulting in damaged useless packets at the destination. There are two types of collisions; primary collision, due to the transmission of the stations which can hear each other, and hidden terminal collision, when stations outside the hearing range of each other transmit to the same receiving stations. For a WMN, direct collisions can be minimized by short propagation and carrier sense times. Thus, in this paper we only consider hidden terminal collision while neglecting direct collisions. To reduce or eliminate hidden terminal collision, code division multiple access (CDMA) protocols have been introduced. The collision-free property is guaranteed by the use of spread spectrum communication techniques and the proper assignment of orthogonal codes. Such codes share the fixed channel capacity allocated to the network in the design stage. Thus, it is very important to minimize the number of codes while achieving a proper transmission quality level in CDMA WMNs. In this paper, an efficient heuristic code assignment algorithm for eliminating hidden terminal collision in CDMA WMNs with general topology.

• IE interfaces
• /
• v.19 no.1
• /
• pp.26-33
• /
• 2006

Many Firms consider the application of a cross-docking system to reduce inventory and lead-time. However, most studies mainly concentrate on the design of a cross-docking system. This study presents the method that selects the cross-docking center under the existing logistics network. Describing the operation environment to apply the cross-docking system, the selection criteria of the cross-docking center, and the main constraints of transportation planning under the environment of multi-level logistics network, we define the selection problem of the cross-docking center applied to a logistics field. We also define the simulation model that can analyze variously the cross-docking volume and develop the selection methodology of the cross-docking center. The simulation model presents the algorithm and influence factors of the cross-docking system, the decision criteria of the system, policy parameter, and input data. In addition, this study analyzes the effect of increasing the number of simultaneous receiving and shipping docks, and the efficiency of the overnight transportation and cross-docking by evaluating each scenario after simulating the scenarios with the practical data of the logistics field.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.50.1-50.11
• /
• 2023

Background: The rise in telecommuting or non-face-to-face work owing to the coronavirus disease 2019 pandemic has fueled conversations regarding the "right to disconnect." Although evidence suggests that receiving work-related communications through telecommunication devices outside of work hours may lead to various symptoms and illnesses, limited research has been undertaken on these symptoms. This study therefore aims to investigate the correlation between receiving work communications through telecommunication devices after work hours and the occurrence of work-related headaches and eyestrain in full-time, non-shift white-collar workers. Methods: This study used data from the 6th Korean Working Conditions Survey. The frequency of using telecommunication devices for work purposes outside of working hours was divided into five categories: "Every day," "Several times a week," "Several times a month," "Rarely," and "Never." Work-related headaches and eyestrain were categorized based on a "yes" or "no" response to the survey questions. Descriptive statistics, χ² tests, and multiple logistic regression analyses were performed using SPSS 27.0. Results: After adjusting for sex, age, income level, education, occupation, workplace size, work hours, and sleep disorders, the odds ratio (OR) of work-related headaches and eyestrain based on frequency of telecommunication device usage were as follows: "rarely" (OR: 1.292; 95% confidence interval [CI]: 1.111-1.503), "several times a month" (OR: 1.551; 95% CI: 1.249-1.926), "several times a week" (OR: 1.474; 95% CI: 1.217-1.784), and "every day" (OR: 1.548; 95% CI: 1.321-1.813). Conclusions: Employees who use telecommunication devices for work after regular hours are more susceptible to experiencing work-related headaches and eyestrain compared to those who do not. However, there is a dearth of research examining the physical and mental health impacts of using telecommunication devices for after-hours work. Furthermore, the existing preventative measures in Korea are insufficient. Consequently, it is imperative to develop effective measures and conduct additional research to address this issue.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.48-56
• /
• 2009

Regulation of Visible Light Transmission Percentage (VLT%) has been argued because it was known that the degree of darkness of tinted vehicle can affect to driving maneuver. Previously, it was proven that low level of VLT affects capacity reduction. But, due to lack of field data they could not analyze the effect of Car-Following model parameters. This study focuses on the effect of a tinted vehicle on following traffic flow. RTK GPS receiving data through field experiment analyzed based on headway distance, acceleration noise, sensitivity, and reaction time. As a result of analysis through GM 1st Model and 3rd Model, influence of following vehicle vary inversely with VLT and risk according as tinting of lead vehicle is third vehicle bigger than second vehicle. Also the results patterns of GM 3rd model include distance-headway are same with GM 1st Model. In the further need to research for influence analysis of traffic flow stability by the level of VLT.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.149-156
• /
• 2020

Blast furnace revamping in steel industry is one of the most important work to complete the complicated equipment within a short period of time based on the interfaces of various types of work. P company has planned to build a Smart Tracking System based on the wireless tag system with the aim of complying with the construction period and reducing costs, ahead of the revamping of blast furnace scheduled for construction in February next year. It combines the detailed design data with the wireless recognition technology to grasp the stage status of design, storage and installation. Then, it graphically displays the location information of each member in relation to the plan and the actual status in connection with Building Information Modeling (BIM) 4D Simulation. QR Code is used as a wireless tag in order to check the receiving status of core equipment considering the characteristics of each item. Then, DB in server system is built, status information is input. By implementing BIM 4D Simulation data using DELMIA, the information on location and status is provided. As a feature of the S/W function, a function for confirming the items will be added to the cellular phone screen in order to improve the accuracy of tagging of the items. Accuracy also increases by simultaneous processing of storage and location tagging. The most significant effect of building this system is to minimize errors in construction by preventing erroneous operation of members. This system will be very useful for overall project management because the information about the position and progress of each critical item can be visualized in real time. It could be eventually lead to cost reduction of project management.

• The Journal of Society for e-Business Studies
• /
• v.8 no.3
• /
• pp.177-195
• /
• 2003

In a traditional customer support environment, mainly call centers or service centers are responsible for receiving inquiries from their customers via telephone calls. Due to the rapid growth of Internet with its widespread acceptance and accessibility, means of communication with customers in the traditional customer support center, such as telephones, letters, and direct-visiting, have been replaced by e-mails and bulletin board systems (BBSs) using the Internet constantly. BBSs are basically question and answer systems, they require some lead time to get answer from administrator. To reduce lead time, BBSs enable remote customers or users to log on and tap into a knowledge database that is generally formatted in the form of Frequently Asked Questions (FAQs) that provide answers and solutions to the common problems. And, many different types of the questions are mixed on the BBS. It is a burden to administrator. To build FAQs and to support BBS adminstrator, a supporting tool which is to categorize questions is helpful. In this research, we suggest an interactive question categorizing methodology which consists of steps to present question using keywords, identifying keywords' affinity, computing similarity among questions, and clustering questions. This methodology allows users to interact iteratively for clear manifestation of ambiguous questions. We also developed a prototype system, IQC (interactive question categorizer) and evaluated its performance using the comparison experiments with other systems. IQC is not a general purposed system, but it produces a good result in a given specific domain.

• Journal of Chest Surgery
• /
• v.50 no.6
• /
• pp.443-447
• /
• 2017

Background: The inferior vena cava filter (IVCF) is very effective for preventing pulmonary embolism in patients who cannot undergo anticoagulation therapy. However, if a filter is placed in the body permanently, it may lead to other complications. Methods: A retrospective study was performed of 159 patients who underwent retrievable Cook Celect IVCF implantation between January 2007 and April 2015 at a single center. Baseline characteristics, indications, and complications caused by the filter were investigated. Results: The most common underlying disease of patients receiving the filter was cancer (24.3%). Venous thrombolysis or thrombectomy was the most common indication for IVCF insertion in this study (47.2%). The most common complication was inferior vena cava penetration, the risk of which increased the longer the filter remained in the body (p=0.032, Exp(B)=1.004). Conclusion: If the patient is able to retry anticoagulation therapy and the filter is no longer needed, the filter should be removed, even if a long time has elapsed since implantation. If the filter cannot be removed, it is recommended that follow-up computed tomography be performed regularly to monitor the progress of venous thromboembolisms as well as any filter-related complications.

• Journal of Animal Science and Technology
• /
• v.59 no.4
• /
• pp.7.1-7.13
• /
• 2017

Background: Selenium is one of the trace minerals whose deficiency is known to lead to complications of female reproduction. The identified gaps in researches regarding selenium and pregnancy include optimizing the dosage of selenium supplementation, timing of supplementation, finding the best form and type of selenium, and selenium administration combined with other antioxidants. Hence, this study was conceptualized to address one of the identified gaps, that is, to find out the best timing of selenium administration around the time of pregnancy. Specifically, this study aimed to assess the effects of maternal Selenium-supplementation, administered at various stages of periconception period, on murine blastocyst morphology, percent occurrence of good quality blastocysts, and implantation status. Methods: ICR female mice were randomly assigned into the unsupplemented group (Group I) receiving basal diet without selenium, and treatment groups given with $3.0{\mu}g$ selenium-supplement per day during pregestation only (Group II), pregestation-throughout-gestation (Group III) and gestation only (Group IV). Both blastocyst morphology and implantation status were assessed. Results: The morphometric measurements of blastocysts appeared to be unaffected by selenium-supplementation at different stages of periconception. Selenium-supplementation at pregestation only (Group II) and gestation only (Group IV) produced higher percent occurrence of good quality blastocysts and lower percent pre-implantation loss than Group III. Among all the treatment groups, Group III (Selenium-supplementation during pregestation-to-gestation) yielded the lowest quality blastocysts and highest percent pre-implantation loss. Conclusion: Maternal selenium-supplementation during pregestation and gestation stages of the periconception period yielded a high percent occurrence of good quality blastocysts and pre-implantation success.