• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1767-1777
• /
• 2010

In digital TV broadcasting, such as terrestrial, cable, satellite, and IPTV, the head-end of digital TV broadcasting has a more complicated transmission structure than that of analog TV broadcasting. Furthermore, digital TV broadcasting has a feature that supports multiplex models, such as Multiple Program Transport Stream (MPTS). Therefore, the purpose of our work was to design and examine a more efficient new system of emergency alert message transmission to support the digital TV broadcasting environments. Digital TV broadcasting is the IP generation or RF transmission of 8-VSB, QAM, and QPSK modulated through a multiplexer or re-multiplexer multiplexed stream as a MPEG-2 Transport Stream after content encoding. The new system proposed in this paper transmits an emergency alert message without scrambling after replacing the PID and payload of the -packet with the message prototype in the TS stream from the multiplexer. If we need to transmit an emergency alert message under digital TV broadcasting services, then the receiver first checks the PID of each packet in the TS stream for the emergency alert message. Next, if a packet is determined to be an emergency alert message, then the set-top box displays the message on the TV screen using its function of On Screen Display, or the PC based software displays the message on the monitor screen using its function of overlay with user interface if the packet is found to be an emergency alert message. We have designed an emergency alert message protocol and a system model. By experiments and analysis of the system, we concluded that the system achieved efficiency and the ability to send and receive emergency alert messages using the system under different digital TV broadcasting service environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.895-901
• /
• 2016

The next generation wireless and satellite communications require high transmission efficiency and high reliability to provide various services with subscribers. To satisfied these requirements, incorporated MIMO (Multiple Input Multiple Output) system with FTN (Faster Than Nyquist) techniques based on layered space time coded method are considered in the paper. To improve performance, STTC (Space Time Trellis Code) was employed as an inner code. As the same as SISO (Single Input Single Output) system, the outer codes are turbo codes. In receiver side, BCJR algorithm is used for STTC decoding in order to eliminate interferences induced by FTN transmission. They can yield significantly increased the data rates and improved link reliability without additional bandwidth. Therefore, we proposed a new decoding model for MIMO FTN model and confirmed that performance was improved compared to conventional SISO model according to amount of interference for FTN.

• The KIPS Transactions:PartC
• /
• v.12C no.4 s.100
• /
• pp.465-472
• /
• 2005

IEEE 802.11 wireless LAN technology is essential for wireless internet, next generation converged network and home network. But, it is certain that user's privacy must be provided to expand the applicable area in IEEE 802.11 WLAN. Recently, WEP and 802.11i security scheme can be used in MAC Layer. But with VPN technology which is applied to WLAN user, it means that suity mechanism is used redundantly. One bit authentication mechanism was already proposed to solve this redundancy. In this paper, we analyze problems of 1-bit Authentication mechanism which are failure of synchronization and waste of packet. And we propose new algorithm which synchronizes sender with receiver, at once, using duplicated-packet-count information. We show that our algorithm improves success probability of packet authentication up to $98\%$ and efficiency of authentication bit stream up to $97\%$.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.63-68
• /
• 2012

The VLC (visible light communication) system is communication technology using visible rays (RGB) that come out in LED device. It is energy curtailment effect and possible in ubiquitous network service applications. Also, VLC system has the above advantage about that the communication throughout the whole room is enabled by high power lighting and lighting equipment with white colored LED which are easy to install and have good outward appearance. However, the signal detection performance for the receiver near the network of transmitter boundary is severely degraded and the transmission efficiency decreased due to the influence of the interference signal from the adjacent networks. In this paper, we propose an interference mitigation method with optical relay and optical beamforming scheme in VLC systems, and evaluate the reception performance. For the system BER, the proposed system demonstrates the performance enhancement compared to the not using the optical relay and optical beamforming scheme, and SNR performance gain and higher channel capacity is achieved.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.2
• /
• pp.163-172
• /
• 2002

This article investigates the problem of data preprocessing for the precision orbit determination (POD) of low earth orbit satellite using GPS .aw data. Several data preprocessing algorithms have been developed to edit the GPS data automatically such that outlier deletion, cycle slip identification and correction, and time tag error correction. The GPS data are precisely edited for the accuracy of POD. Some methods of data preprocessing are restricted to the rate of the collections of the pseudorange and carrier phase measurements. This study considers the preprocessing efficiency varied with the rate, the quality of receiver and the altitude of the satellite's orbit. We also propose the proper methods in accordance with the rate for single frequency and dual frequency receivers.

• Journal of Korea Multimedia Society
• /
• v.21 no.6
• /
• pp.678-684
• /
• 2018

In order to broaden the indication of middle ear implant, research has been actively conducted on the reverse output method that stimulates the round window. However, it is very difficult to transmit the vibration output effectively because the indivisual anatomical difference of the round window niche is very large and also the visual field is not secured even by a skilled otolaryngologic surgeon. In this paper, we propose a new reverse stimulation method of middle ear implants that transmits energy to the inner ear by using air as a medium. This can compensate for the disadvantages of the conventional method of transmitting vibration energy and minimizes the energy transfer efficiency interference due to the combination of the excitation point and the output device. It was shown that forward and backward transfer characteristics were obtained by cadaveric experiments, and it was shown that it can overcome the acoustical impedance of high round window and transmit energy to inner ear. The receiver, which is the output device of the conventional hearing aids, can generate a constant volume velocity, so it can have a high output at a limited volume, such as a round window niche. So, suggested method can overcome the high acoustical impedance of the round window and deliver acoustic energy to the inner ear.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.2141-2145
• /
• 2015

A new broadcasting signal transmission, which can save its channel bandwidth using compressive sensing(CS), is proposed in this paper. A new compression technique, which uses two dimensional discrete wavelet transform technique, is proposed to get high sparsity of multimedia image. A L1 minimization technique based on orthogonal matching pursuit is also introduced in order to reconstruct the compressed multimedia image. The CS enables us to save the channel bandwidth of wired and wireless broadcasting signal because various transmitted data are compressed using it. A $256{\times}256$ gray-scale image with compression rato of 20 %, which is sampled by 10 Gs/s, was transmitted to an optical receiver through 20-km optical transmission and then was reconstructed successfully using L1 minimization (bit error rate of $10^{-12}$ at the received optical power of -12.2 dB).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.4
• /
• pp.747-754
• /
• 2016

DHCP(Dynamic Host Configuration Protocol) is a protocol for efficiency and convenience of the IP address management. DHCP automatically assigns an IP address and configuration information needed to run the TCP/IP communication to individual host in the network. However, existing DHCP is vulnerable for network attack such as DHCP spoofing, release attack because there is no mutual authentication systems between server and client. To solve this problem, we have designed a new DHCP protocol supporting the following features: First, ECDH(Elliptic Curve Diffie-Hellman) is used to create session key and ECDSA(Elliptic Curve Digital Signature Algorithm) is used for mutual authentication between server and client. Also this protocol ensures integrity of message by adding a HMAC(Hash-based Message Authentication Code) on the message. And replay attacks can be prevented by using a Nonce. As a result, The receiver can prevent the network attack by discarding the received message from unauthorized host.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.823-832
• /
• 2016

This paper presents a generation method of test streams for verifying conformance of an UHD broadcasting receiver including decoders for video and audio as well as parsers for PSIP and closed caption data. The proposed test streams for video/audio signals can evaluate conformance of HEVC, AC-3 and DTS-HD standards. Especially, test streams for HEVC video compression standard can be used for testing syntax compliance and error resilience for a HEVC decoder. Moreover, the proposed test streams for system/program and closed caption can be applied for verifying parsers for PSIP and CEA-708 standards.

• Journal of Broadcast Engineering
• /
• v.4 no.1
• /
• pp.59-67
• /
• 1999

In this paper, we study two important topics in stereoscopic image communication system. One is a disparity estimation (DE) method to obtain the depth information of a scene at the transmitter and the other is an intermediate view reconstruction(IVR) method at the receiver. We propose a new DE method using an edge-preserving directional regularization technique. The proposed DE method smooths disparity vectors in smooth regions and preserves edges without over-smoothing problem. It provides better reconstructed stereoscopic images and improved coding efficiency than the existing regularization techniques. In addition. we propose a new IVR method using interpolation and extrapolation techniques. The proposed IVR method preserves edge regions as well as occlusion regions well. Thus. it gives better intermediate views than the existing IVR methods.