• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.147-153
• /
• 2018

Beacon enables one to measure distance indoors based on low-power Bluetooth low energy (BLE) technology, while GPS (Global Positioning System) only can be used outdoors. In measuring indoor distance using Beacon, RSSI (Received Signal Strength Indication) is considered as the one of the key factors, however, it is influenced by various environmental factors so that it causes the huge gap between the estimated distance and the real. In order to handle this issue, we propose the adaptive ANN (Artificial Neural Network) based approach to measuring the exact distance using Beacon. First, we has carried out the preprocessing of the RSSI signals by applying the extended Kalman filter and the signal stabilization filter into decreasing the noise. Then, we suggest the multi-layered ANNs, each of which layer is learned by specific training data sets. The results showed an average error of 0.67m, a precision of 0.78.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.217-222
• /
• 2006

To find a location, GPS has been wildly used. But, it is hard to use in indoor because of very weak signal level. To meet indoor requirements, there have been many studies applying wireless communication networks such as WLAN, UWB and ZigBee. Among these, ZigBee is widely adopted in many WSN applications because it has an advantage of low-power and low-cost. In ZigBee, the RSSI is used as range measurement for ad-hoc network. The RSSI are converted to ranges using the signal attenuation model and these ranges become inputs of positioning methods. The obtained position with RSSI has large error because of its poor accuracy. To overcome this problem, ultrasonic sensors are added in many researches. By measuring the arrival time difference of ZigBee and ultrasound as a range measurement, the precise position can be found. However, there are still many problems: scheduling of beacons to transmit signals in a correct order, addition and synchronization of beacons and low-rate positioning rate. At this paper, an efficient method to solve these problems is proposed. In the proposed method, a node transmits ZigBee and ultrasound signal simultaneously. And beacons find the range with the received signals and send it back to a node with ZigBee. The position is computed in a node with the received ranges. In addition, a new positioning algorithm to solve the risk of the divergence in the linearization method and the singularity problem in the Savarese method is presented. Both static and dynamic experimental results show 0.02m RMS errors with high output rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1256-1262
• /
• 2008

In mobile broadcasting networks, handover is an important issue to support seamless mobility. DVB-H(Digital Video Broadcasting for Handheld) standard was developed to enhance mobile features for DVB-T(Digital Video Broadcasting -Terrestrial) standard. This paper proposes new approaches for improving handover performance in the DVB-H networks. The proposed handover schemes are targeted to two different DVB-H receivers: One is for the receivers equipped with GPS devices. The other is for ones without GPS support. The first handover approach modifies the cell description table (CDT) proposed in the literature [1]. The second proposes a novel estimation technique of predefined handover region based on a new handover map table (HMT). This new handover approach estimates a predefined handover region with the measured RSSI(Received Signal Strength Indication) signal patterns. Using proposed handover algorithm, we can reduce time and power consumption. Through the computer simulations, we evaluate the performance of handover algorithm.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.159-165
• /
• 2022

In this paper, a frame synchronization structure for the Binary Phase Shift Keying (BPSK) modulation method in underwater acoustic communication was proposed. The proposed frame synchronization structure is largely divided into two. First, the approximate position and frequency offset of the frame are obtained by non-coherent correlation and sliding Fast Fourier Transform (FFT) method. Second, after compensating for the frequency error to the received signal, the exact position of the frame is obtained by coherent correlation method. Maritime experiments were conducted to confirm the performance of the 2-STEP frame synchronization structure. It was showed that the limitations of the non-coherent correlation and sliding FFT method can be verified when the power of the received signal was greatly reduced due to the channel characteristics. As a result, stable frame synchronization could be obtained by compensating for the frequency error and then using the coherent correlation method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2024

Smart City, a key application area of the AIoT (Artificial Intelligence of Things), provides various services in safety, security, and healthcare sectors through location tracking and location-based services. an IPS (Indoor Positioning System) is required to implement location-based services, and wireless communication technologies such as WiFi, UWB (Ultra-wideband), and BLE (Bluetooth Low Energy) are being applied. BLE, which enables data transmission and reception with low power consumption, can be applied to various IoT devices such as sensors and beacons at a low cost, making it one of the most suitable wireless communication technologies for indoor positioning. BLE utilizes the RSSI (Received Signal Strength Indicator) to estimate the distance, but due to the influence of multipath fading, which causes variations in signal strength, it results in an error of several meters. In this paper, we conducted research on a path loss model that can be applied to BLE IPS for proximity services, and confirmed that optimizing the free space propagation loss coefficient can reduce the distance error between the Tx and Rx devices.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.4
• /
• pp.221-225
• /
• 2014

Low power RF devices, such as RFID and Zigbee, are important for ubiquitous sensing. These devices, however, are powered by portable energy sources, such as batteries, which limits their use. To mitigate this problem, this study developed RF energy harvesting with W-CDMA for a low power RF device. Diodes are required with a low turn on voltage because the diode threshold is larger than the received peak voltage of the rectifying antenna (rectenna). Therefore, a Schottky diode HSMS-286 was used. A prototype of RF energy harvesting device showed the maximum gain of 5.8dBi for the W-CDMA signal. The 16 patch antennas were manufactured with a 10 dielectric constant PTFT board. In low power RF devices, the transmitter requires a step-up voltage of 2.5~5V with up to 35 mA. To meet this requirement, the Texas Instruments TPS61220 was used as a low input voltage step-up converter. From the evaluated result, the achievable incident power of the rectenna at 926mV to operate Zigbee can be obtained within a distance of 12m.

• Smart Structures and Systems
• /
• v.14 no.4
• /
• pp.617-641
• /
• 2014

The energy constraint is still a common issue for the practical application of wireless sensors, since they are usually powered by batteries which limit their lifetime. In this paper, a practical compound energy efficiency strategy is proposed and realized in the implementation of a real time wireless sensor platform. The platform is intended for wireless structural monitoring applications and consists of three parts, wireless sensing unit, base station and data acquisition and configuration software running in a computer within the Matlab environment. The high energy efficiency of the wireless sensor platform is achieved by a proposed adaptive radio transmission power control algorithm, and some straightforward methods, including adopting low power ICs and high efficient power management circuits, low duty cycle radio polling and switching off radio between two adjacent data packets' transmission. The adaptive transmission power control algorithm is based on the statistical average of the path loss estimations using a moving average filter. The algorithm is implemented in the wireless node and relies on the received signal strength feedback piggybacked in the ACK packet from the base station node to estimate the path loss. Therefore, it does not need any control packet overheads. Several experiments are carried out to investigate the link quality of radio channels, validate and evaluate the proposed adaptive transmission power control algorithm, including static and dynamic experiments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.5
• /
• pp.71-78
• /
• 2017

Visible light communication (VLC) offers communication function in addition to illumination. Because the signal communication capacity per cable is 1,000 times compared to the power line communication (PLC), optical fiber is being advertised as the basis of the information and communication. Also dimming control of LED is an important component needed to provide energy savings and quality of life. This study configured multi-hop VLC system model in a building using optical fiber and analyzed the power performance of two of modulations using dimming techniques. The transmission power and received power were used to compare the power performance in multi-hop VLC environments.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.173-181
• /
• 2016

In this paper, we address a new robust optimization problem in a multiuser multiple-input single-output broadcasting system with simultaneous wireless information and power transmission, where a multi-antenna base station (BS) sends energy and information simultaneously to multiple users equipped with a single antenna. Assuming that perfect channel-state information (CSI) for all channels is not available at the BS, the uncertainty of the CSI is modeled by an Euclidean ball-shaped uncertainty set. To optimally design transmit beamforming weights and receive power splitting, an average total transmit power minimization problem is investigated subject to the individual harvested power constraint and the received signal-to-interference-plus-noise ratio constraint at each user. Due to the channel uncertainty, the original problem becomes a homogeneous quadratically constrained quadratic problem, which is NP-hard. The original design problem is reformulated to a relaxed semidefinite program, and then two different approaches based on convex programming are proposed, which can be solved efficiently by the interior point algorithm. Numerical results are provided to validate the robustness of the proposed algorithms.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2020

In this paper, we studied an algorithm for estimating a desired target by removing noise and interference in a wireless communication environment. When an information signal with a mixture noise and interference receive a receiver, noise and interference signals must be removed to accurately estimate a desired target. In order to divide the received signal region into two spatial, a power spectrum is obtained by analyzing a correlation matrix, covariance, eigen vector, and eigen value. The proposed spectrum is an algorithm that can remove noise and interference, and analyzes the existing algorithm and target estimation performance through simulation. As a result of simulation, the target estimation resolution of existing algorithm is more than 10°, but the resolution of the proposed algorithm is less than 10°. The proposed algorithm has improved the resolution of about 5° than the exiting algorithm. The proposed algorithm proved that the target estimation accuracy and resolution are superior to the existing algorithm.