• 제목/요약/키워드: Received Signal Power

검색결과 411건 처리시간 0.023초

Tank회로를 이용한 배전선신호 결합장치의 특성분석 (Signal Transmission Characteristic of PLC Coupler using Tank Circuit)

  • 김종수;계문호;유동욱;오성철;김종우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1993년도 하계학술대회 논문집 B
    • /
    • pp.809-811
    • /
    • 1993
  • The load impedance of power lines generally varies with time, areas, and season. Also, the harmonic noises by the power electrical equipments are scattered through the power lines. The received signal level varies with the environment and is not able to detect the PLC(Power Line Carrier) signal. For this reason, it is requried for the signal transmitter to hold the received signal level uniform independently with the variation of the load impedence. In this paper, the power lines are modeled simply and a method keeping the received signal level uniform is suggested through the analysis of the signal transmission characteritics of the PLC coupler using tank circuit.

  • PDF

Design of Roll Rate Estimator using GPS Signal for Spinning Vehicle

  • Lee, Sunyong;Jin, Mihyun;Choi, Heon Ho;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제5권3호
    • /
    • pp.109-118
    • /
    • 2016
  • The present paper proposes a method that can estimate a roll rate of spinning vehicles utilizing GPS receivers. The proposed method analyzes a relation between received signal and correlation value and utilizes a phenomenon that received signal power that changes according to a signal incident direction affects a correlation value. That is, a roll-rate estimation method using zero crossing detection method for correlation value, which has sinusoidal periodicity according to rotations of vehicles, is proposed. A correlation value in real environments experiences a jitter so that the proposed method includes a pre-processing filter and detection threshold setting way is also considered to reduce the effect of received signal power. In order to verify the operation of the proposed method and analyze the performance, a signal generator and software-defined receiver (SDR) are designed. The signal generator generates intermediate frequency (IF) signal by taking the rotation of vehicles, antenna gain, and signal power into consideration, and a correlation value is acquired by taking the generated IF signals into consideration. Using the generated correlation value, the operation of the proposed roll rate estimation method is verified and the performance is analyzed.

Interference Avoidance through Pilot-Based Spectrum Sensing Algorithm in Overlaid Femtocell Networks

  • Sambanthan, Padmapriya;Muthu, Tamilarasi
    • ETRI Journal
    • /
    • 제38권1호
    • /
    • pp.30-40
    • /
    • 2016
  • Co-channel interference between macro-femtocell networks is an unresolved problem, due to the frequency reuse phenomenon. To mitigate such interference, a secondary femtocell must acquire channel-state knowledge about a co-channel macrocell user and accordingly condition the maximum transmit power of femtocell user. This paper proposes a pilot-based spectrum sensing (PSS) algorithm for overlaid femtocell networks to sense the presence of a macrocell user over a channel of interest. The PSS algorithm senses the pilot tones in the received signal through the power level and the correlation metric comparisons between the received signal and the local reference pilots. On ensuring the existence of a co-channel macrocell user, the maximum transmit power of the corresponding femtocell user is optimized so as to avoid interference. Time and frequency offsets are carefully handled in our proposal. Simulation results show that the PSS algorithm outperforms existing sensing techniques, even at poor received signal quality. It requires less sensing time and provides better detection probability over existing techniques.

Establishing Best Power Transmission Path using Receiver Based on the Received Signal Strength

  • 엄정숙;손희동;박용완
    • 인터넷정보학회논문지
    • /
    • 제18권6호
    • /
    • pp.15-23
    • /
    • 2017
  • Wireless power transmission (WPT) for wireless charging is currently attracting much attention as a promising approach to miniaturize batteries and increase the maximum total range of an electric vehicle. The main advantage of the laser power beam (LPB) approach is its high power transmission efficiency (PTE) over long distance. In this paper, we present the design of a laser power beam based WPT system, which has a best WPT channel selection technique at the receiver end when multiple power transmitters and single power receiver are operated simultaneously. The transmitters send their transmission channel information via optically modulated laser pulses. The receiver uses the received signal strength indicator and digitized data to choose an optimum power transmission path. We modeled a vertical multi-junction photovoltaic cell array, and conducted an experiment and simulation to test the feasibility of this system. From the experimental result, the standard deviation between the mathematical model and the measured values of normalized energy distribution is 0.0052. The error between the mathematical model and measured values are acceptable, thus the validity of the model is verified.

The Performance Analysis of Beamforming Algorithm for Anti-Spoofing

  • Choi, Yun Sub;Lee, Sun Yong;Park, Chansik;Ahn, Byoung Sun;Won, Hyun Hee;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제5권3호
    • /
    • pp.131-136
    • /
    • 2016
  • The present paper shows that beamforming algorithm such as Minimum Variance Distortionless Response (MVDR) based on array antenna signal processing can have not only anti-jamming but also anti-spoofing characteristics. A beam pattern due to the beamforming algorithm strengthens received signal power as it is formed in the incident direction of desired signal. During the process, the effect of unnecessary signals such as spoofing signals can be reduced because the beam pattern reduces received signal power in the incident directions excluding the beam pattern-directed direction. In order to analyze the anti-spoofing effect due to the beamforming algorithm, a software-based simulation environment was configured. An arbitrary error was applied between incident direction of Global Positioning System (GPS) satellite signal and steering vector direction of the beamforming algorithm to analyze the received signal power and required conditions were provided to see the anti-spoofing effect due to the beamforming algorithm. The used antenna was 7-element planar circular array and beam patterns were formed through the MVDR algorithm.

A Spoofing Detection Scheme Based on Elevation Masked-Relative Received Power in GPS Receivers using Multi-band Array Antenna

  • Junwoo Jung;Hyunhee Won;Sungyeol Park;Haengik Kang;Seungbok Kwon;Byeongjin Yu;Seungwoo Seo
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제12권2호
    • /
    • pp.101-111
    • /
    • 2023
  • Many spoofing detection studies have been conducted to cope with the most difficult types of deception among various disturbances of GPS, such as jamming, spoofing, and meaconing. In this paper, we propose a spoofing detection scheme based on elevation masked-relative received power between GPS L1 and L2 signals in a system using a multi-band array antenna. The proposed scheme focuses on enabling spoofing to be normally detected and minimizes the possibility of false detection in an environment where false alarms may occur due to pattern distortion among elements of an array antenna. The pattern distortion weakens the GPS signal strength at low elevation. It becomes confusing to detect a spoofing signal based on the relative power difference between GPS L1 and L2, especially when GPS L2 has weak signal strength. We propose design parameters for the relative power threshold including beamforming gain, the minimum received power difference between L1 and L2, and the patch antenna gain difference between L1 and L2. In addition, in order to eliminate the weak signal strength of GPS L2 in the spoofing detection process, we propose a rotation matrix that sets the elevation mask based on platform coordinates. Array antennas generally do not have high usefulness in commercial areas where receivers are operated alone, but are considered essential in military areas where GPS receivers are used together with signal processing for beamforming in the direction of GPS satellites. Through laboratory and live sky tests using the device under test, the proposed scheme with an elevation mask detects spoofing signals well and reduces the probability of false detection relative to that without the elevation mask.

애드 혹 무선 네트워크에서의 링크 안정성 기반 라우팅 알고리즘 (Routing Algorithm based on Link Stability for Ad Hoc Wireless Networks)

  • 임세영;김훈;유명식
    • 한국통신학회논문지
    • /
    • 제31권7B호
    • /
    • pp.652-659
    • /
    • 2006
  • 애드 혹 네트워크에서 라우팅 알고리즘은 매우 중요한 연구 분야중의 하나이다. 기존의 라우팅 알고리즘은 현재의 네트워크 토폴로지 상황만을 고려하여 라우팅 경로를 설정하기 때문에 안정적인 라우팅 경로를 설정하는데 많은 어려움이 있다. 이와 같은 문제점을 해결하기 위해 수신 신호 세기를 이용하여 라우팅을 수행하는 알고리즘들이 제안되었지만, 이들은 평균 수신 신호 세기만을 고려하였기 때문에 라우팅 프로토콜의 성능 향상에는 한계가 있다. 따라서 본 논문에서는 평균 수신 신호 세기와 수신 신호 세기의 변화를 고려한 링크 안정성 기반의 라우팅 알고리즘을 제안하였다. 제안된 알고리즘의 성능을 분석하기 위해 다양한 환경에서의 모의실험을 수행하였으며, 그 결과 기존의 알고리즘보다 우수한 성능을 보임을 확인하였다.

WAVE 시스템에서 선택 다이버시티를 위한 선택 기준에 대한 연구 (A Study on Selection Criterions for Selection Diversity in WAVE Systems)

  • 홍대기
    • 반도체디스플레이기술학회지
    • /
    • 제14권2호
    • /
    • pp.9-16
    • /
    • 2015
  • In this paper, selection criterions on selection diversity are researched. The diversity is applied to the multiple antenna system based on wireless access in vehicular environment (WAVE) standard for rapid varying channel. Least squares (LS) based decision feedback equalizer (DFE) are used for channel equalization. Received signal is regenerated by means of the decision feedback path. In the selection diversity, the regenerated signal as well as the received signal is selected according to selection criterion. The decision feedback algorithm can follow the fast speed of WAVE fading channel. To control the tracking speed of the time-varying channel, simple low pass filter is used. Finally, the estimated channel value recovers the distorted payloads. Signal power before automatic gain control (AGC) in analog stage can be used as a selection criterion. In the digital stage, signal power after AGC, noise power after AGC, signal to noise ratio after AGC and cross-correlation method can be used as selection criterions. According to the simulation results, the performance of the selection diversity is improved in comparison with that of the combining diversity for the WAVE fading channel.

주파수 선택적 Rayleigh 페이딩 채널에서 cdma2000 순방향링크의 고속 폐루프 전력제어에 대한 성능 평가 (Performance Evaluation for Fast Closed-Loop Power Control of cdma2000 Forward Link in frequency-Selective Rayleigh Fading Channel)

  • 강법주;남윤석
    • 한국통신학회논문지
    • /
    • 제26권11B호
    • /
    • pp.1522-1533
    • /
    • 2001
  • 본 논문에서는 cdma2000 시스템에서 순방향 폐루프전력제어를 위해 수신 E$_{b}$/I$_{o}$ 를 추정하는 방법을 다루고 있다. 이동국 수신 b//I$_{o}$ 의 추정은 순방향 전력제어 부채널(forward power control subchannel) 전송 심벌을 이용하고 있다. 수신비트에너지와 잡음분산의 추정은 주파수 선택적 Rayleigh 페이딩 채널에서 해석되었다. 특히, 수신비트에너지의 추정은 SIR(signal-to-interference ratio)을 향상시키기 위해서 rake 핑거들과 1/Q 수신심벌들웨 대하여 코히런트 결합에 의해 수행되었다. 그리고 본 논문에서는 차량속도와 전력조정스텝크기에 따른 순방향 폐루프 전력제어의 성능을 비트오율과 전력제어에러 측면에서 평가하고 있다. 시뮬레이션 결과로는 차량속도에 따른 최적의 전력조정스텝크기를 제시하고 있다.

  • PDF

도심환경에서 각도-시간 송신다이버시티의 성능분석 (Performance Analysis of Angle Time Transmit Diversity in Urban Area)

  • 박병훈
    • 전기학회논문지P
    • /
    • 제60권4호
    • /
    • pp.200-205
    • /
    • 2011
  • In multipath fading channel, diversity is essential to mitigate the impairments. In this paper, we have proposed the angle diversity scheme called ATTD(Angle Time Transmit Diversity) instead of Alamouti's STTD(Space Time Transmit Diversity) and have analyzed the performance of the proposed scheme when signal powers caused by the transmission to different angles are different. Based on it, we have measured the wireless vector-channel in the urban area, which has lots of high-story buildings, using the data collected from the 8 by 4 smart array antenna system that we made. According to the measured data, the received signals from different angles have different signal powers. Our performance analysis results show that the proposed scheme has better performance than the space diversity scheme when the received path signal power is at least -7dB compare to the strongest path signal power.