• 한국운동역학회지
• /
• 제17권4호
• /
• pp.107-113
• /
• 2007

The purpose of this study were to investigate the effects of knee brace on the knee muscular neuro-biomechanical variables during the rebound in female highschool basketball players. Twelve high school female ($17.9{\pm}0.8years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament with and without knee brace. Kinematic data were collected to estimate the knee flexion, abduction angles and jump height. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes with knee brace showed more reduced the knee abduction angle and the ratio of quadriceps muscle activity at foot contact phase than without knee brace. In conclusion, Female athletes with brace reduced knee anterior cruciate ligament loads.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1162-1167
• /
• 2004

From the early 1980's, the New Austrian Tunnelling Method (NATM) has been developed as a one of the standard tunneling method in Korea. Owing to the results of many researches, the practical problems of shotcrete has been improved for a last decade. However, the excess amount of rebound still remains one of the critical problems in shotcrete technology. In order to improve for this rebound problem, recently developed cement mineral accelerator has been successfully applied to several NATM tunnels in Korea. An experimental investigation was carried out in order to verify the rebound characteristics of wet-mix Steel Fiber Reinforced Shotcrete (SFRS) with powder types cement mineral accelerator. Mortar setting test, SEM analysis, bonding test under spring water condition and rebound test were conducted. From the result, wet-mix SFRS with cement mineral acelerator exhibited excellent bonding characteristics even spring water condition and less rebound ratio compared to the conventional liquid accelerator.

• 한국건설순환자원학회논문집
• /
• 제10권2호
• /
• pp.143-151
• /
• 2022

동결융해에 의한 콘크리트 손상 발생 시기를 평가하기 위하여 상대동탄성계수와 표면반발경도를 이용하여 비교하였다. 비교 결과 W/C 70 실험체군에서는 표면반발경도에 의한 콘크리트 손상 발생 평가가 200 싸이클 이상 빠르게 나타나는 것으로 관찰되었다. 뿐만 아니라 이후 점점 심해지는 동해를 표현할 수 있는 데이터를 지속적으로 제공해주어 동해 발생하는 초기 시점부터 동해를 확인할 수 있다는 것을 나타냈다. W/C 60과 50 실험체군에서도 표면반발경도가 콘크리트 동해 손상을 상대동탄성계수 보다 빠르게 평가했으며, 물-시멘트비에 변화에 상관없이 전반적으로 동결융해 손상시기 상대적으로 빠르고 정확하게 평가한 것으로 판단된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.100-101
• /
• 2015

This study was carried out to investigate and analyse the influence of brain and unit weight of cement on the properties of shotcrete through the laboratory and field test. From the results of the test, the shotcrete with high blaine cement showed the rebound ratio lower and the strength properties higher than the shotcrete with normal blaine cement. Such as this was produced also in the mix with low unit weight of high blaine cement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.651-654
• /
• 1999

It is required that the compressive strength of concrete should be estimated accurately from the view point of efficient quality control and maintenance of buildings. In this paper, the equations to estimate the compressive strength of concrete using granite aggregates were suggested for both rebound hammer method and ultrasonic pulse velocity method. The results were compared with those for different age or curing condition. The rebound numbers for concrete cured in air were larger than for concrete cured in water. The difference between rebound numbers for concrete cured in water and in air was larger than for concrete cured in water. The difference between rebound numbers for concrete cured in water and in air was larger when water cement ratio was high. Also, with the increase of age, the velocity of ultrasonic pulse for concrete cured in air was measured larger when compared with that in water.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 가을 학술발표회 논문집
• /
• pp.285-292
• /
• 1999

The cyclic plate load test were peformed to determine the behavior of reinforced soft ground with multiple layers of geogrid. Five series of test were conducted with varying the soil profile conditions which including the ground level, type of soil, and the thickness of each soil layer. The plate load test equipment was slightly modified to apply the cyclic load. Based on the cyclic plate load test results, the bearing capacity ratio(BCR), subbase modules, shear modules, the elastic rebound ratio, and reinforcing parameters are presented.

• 산업기술연구
• /
• 제29권B호
• /
• pp.57-64
• /
• 2009

This study has analysed actual overbreak, shotcrete rebound and the ratio between the actual quantity of shotcrete to designed shotcrete measured during a NATM tunnel construction. The measured shotcrete rebound was about 7.2% in average which was about half the allowable rebound (15%), showing shotcrete spraying was performed well. Based on the measurement of excavated tunnel shape, average overbreak was about 28.5cm after tunnel excavation by drill and blasting method. This was about 260% of allowable overbreak. In addition, due to the rebound and overbreak actual amount of shotcrete used in the tunnelling work was about 116.5 % of the designed value. According to the field measurement the ratio of actual shotcrete to designed value showed some relation with standard support pattern, but the size of overbreak did not show the correlation with standard support pattern. Hence current design specifications stating the size of overbreak based entirely on standard support pattern should perhaps be reestablished. The insight into the design guideline regarding overbreak and shotcrete.

• 한국운동역학회지
• /
• 제17권3호
• /
• pp.23-29
• /
• 2007

The purpose of this study were to investigate the differences between female and male basketball players in knee neuromuscular biomechanical factors during basketball rebound jump. Twelve high school female ($17.9{\pm}0.8years$) and twelve male ($19.0{\pm}1.6years$) basketball players rebound jumped for maximal vertical height to sufficiently stress the anterior cruciate ligament. Kinematic and ground reaction data were collected and combined with inverse dynamics to estimate the knee extensor and abductor torque. The EMG data from the biceps femoris and rectus femoris was used to estimate the ratio of quadriceps muscle activity. Female athletes showed more reduced knee flexion at foot contact, more increased knee abduction, extensor and abductor knee joint torque at foot contact, and quadriceps ratio at stance phase than those of male athletes. In conclusion, Female athletes showed differences in knee neuromuscular biomechanical factors than male athletes during basketball rebound jump.

• 한국철도학회논문집
• /
• 제3권2호
• /
• pp.84-91
• /
• 2000

The general concept of reinforced roadbed in the high-speed railway is to cope with the soft ground for the bearing capacity and settlement of foundation soil. The cyclic plate load tests were performed to determine the behavior of reinforced ground with multiple layers of geogrid underlying by soft soil. With the test results, the bearing capacity ratio, elastic rebound ratio, subgrade modulus and the strain of geogrids under loading were investigated. Based on these plate load tests, laboratory model tests under cyclic loading were conducted to estimate the effect of geogrid reinforcement in particular for the high-speed rail roadbed. The permanent settlement and the behavior of earth pressure in reinforced roadbed subjected to a combination of static and dynamic loading are presented.

• 한국산학기술학회논문지
• /
• 제21권9호
• /
• pp.604-609
• /
• 2020

콘크리트 표면 마감에는 다양한 방법이 있으며, 시공성을 고려할 때 스프레이 방법이 효과적이나 리바운드 발생 현상이 발생한다. 통상 숏크리트의 손실률은 30-45%가량 보고되고 있으며, 이로 인하여 작업 효율 저하 및 공사비 상승 등의 문제를 발생시킨다. 이를 해결하고자 다양한 선행 연구가 진행되었으며 리바운드량을 저감하기 위해서는 사용재료에 따라 리바운드 발생 억제를 위해 배합을 조정하여야 하며 본 연구에서는 광촉매가 포함된 표면 마감재료에 적합한 리바운드 발생량 저감 목적의 배합 기술에 대한 기초 연구를 진행하였다. 본 연구의 선행연구로는 광촉매 성능에 대해 저감효과 및 최적 혼합 비율을 도출하였고, 선행연구를 바탕으로 규사 함량에 따른 리바운드 저감 및 혼화 재료 별 역학적 내구 특성 검증을 진행하였다. 시험 방법으로는 리바운드, 압축강도, 휨강도, 테이블 플로 시험으로 진행하였고, 모르타르 스프레이 장비의 작업성을 고려하였을 때 Flow 170±10mm로 고정하였다. 실험 변수로는 시멘트 중량 대비 규사 변수로 맞추어 리바운드량 측정을 하였고 규사는 5호, 7호 규사를 사용하였다. 실험 결과 최종 S-1 변수에서 가장 높은 압축강도를 나타냈고 리바운드 양을 최소화할 수 있었다. 이러한 결과는 규사 공극의 결합재가 충분히 충진하게 되어 골재 사이의 결합력이 증가되므로 낮은 리바운드 양을 확보할 수 있었다.