• 제목/요약/키워드: Rear Sub-frame

검색결과 15건 처리시간 0.018초

고강도 열연강판의 경량 자동차 샤시부품 개발 (Application Technology of high strength hot-rolled steels for automotive lightweight chassis parts)

  • 김종철;권태우;전진화;손경선
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2005년도 추계학술대회 논문집
    • /
    • pp.43-45
    • /
    • 2005
  • For application of advanced high strength hot-rolled steels (i.e. DP590, DP780) to automotive lightweight chassis parts, various technologies from design to forming test, optimization of welding condition and investigation of coating properties were tried. The target part of this study was automotive rear sub frame and we could make $16.8\%$ weight reduction by reducing the material thickness and optimizing the design. In addition, the formability and weldability of the newly developed AHSS, DP780, were evaluated.

  • PDF

e-4WD 시스템 개발 (Development of electric Four Wheel Drive System)

  • 조희영
    • 드라이브 ㆍ 컨트롤
    • /
    • 제13권1호
    • /
    • pp.10-17
    • /
    • 2016
  • e-4WD(Electric-4WD) system is a 4WD(4-Wheel Drive) System that can transform a car into a Hybrid System. e-4WD consists of a Motor, Inverter, Speed reducer and Clutch. The Motor, Speed reducer and Clutch are installed on the rear sub-frame as a chassis module type. The inverter is installed separately. Compared to a mechanical 4WD, the e-4WD system has many advantages. For example, the reduced number of drivetrain components makes better use of the space. Driving with a motor only at low speed improves fuel economy and reduces exhaust gas. Engine downsizing is available because the motor assists the engine. The performance of a conventional HEV(Hybrid Electric Vehicle) system can also be maintained. This paper proposes the specifications of components and the control logic for an e-4WD System. And the effect of the e-4WD system is proven using a test vehicle equipped with components under various test conditions.

EFFECT OF THE FLEXIBILITY OF AUTOMOTIVE SUSPENSION COMPONENTS IN MULTIBODY DYNAMICS SIMULATIONS

  • Lim, J.Y.;Kang, W.J.;Kim, D.S.;Kim, G.H.
    • International Journal of Automotive Technology
    • /
    • 제8권6호
    • /
    • pp.745-752
    • /
    • 2007
  • In this study, the effects of flexible bodies in vehicle suspension components were investigated to enhance the accuracy of multibody dynamic simulation results. Front and rear suspension components were investigated. Subframes, a stabilizer bar, a tie rod, a front lower control arm, a front knuckle, and front struts were selected. Reverse engineering techniques were used to construct a virtual vehicle model. Hard points and inertia data of the components were measured with surface scanning equipment. The mechanical characteristics of bushings and dampers were obtained from experiments. Reaction forces calculated from the multibody dynamics simulations were compared with test results at the ball joint of the lower control arm in both time-history and range-pair counting plots. Simulation results showed that the flexibility of the strut component had considerable influence on the lateral reaction force. Among the suspension components, the flexibility of the sub-frame, steering knuckle and upper strut resulted in better correlations with test results while the other flexible bodies could be neglected.

가상 시험 모델을 이용한 군용 대형트럭의 내구해석 (Durability Analysis of a Large-sized Military Truck Using Virtual Test Lab)

  • 서권희;송부근;임현빈;장헌섭;오철조;유웅재
    • 한국자동차공학회논문집
    • /
    • 제19권3호
    • /
    • pp.57-64
    • /
    • 2011
  • In general, the durability performance of a large-sized military truck has been checked through a field durability test which required many man-hours and costs. To reduce these expenses, the durability analysis using a VTL(Virtual Test Lab) at an initial design stage was introduced recently. In this paper, the VTL with a multi-post testrig template for a large-sized truck was developed to compute the load histories transferred to cabin and chassis frame. The VTL consisted of trimmed FE models of cabin, chassis frame, and deck, dynamic models of front and rear suspensions, and a 8-post testrig template. The basic characteristics of the VTL were correlated with experimental results which had been extracted from actual driving test, modal test, and static weight test. The fatigue analysis using MSM(Modal Superposition Method) was applied to evaluate the durability performance of a large-sized military truck. From a series of analytic methods, it is shown that the fatigue analysis process using the VTL could be a useful tool to estimate the fatigue lives and weak areas of a large-sized military truck.

천안함 폭침 이후 북한의 군사도발 양상과 전망 (Trends and Prospects of N. Korea Military Provocations After the Sinking of ROKS Cheon-an)

  • 김성만
    • Strategy21
    • /
    • 통권34호
    • /
    • pp.58-92
    • /
    • 2014
  • Even after S. Korea took 5.24 Measure(24 May 2014), N. Korea has not stopped raising provocations such as the shelling of Yeonpyeong Island, electronic and cyber attacks. To make matters worse, the communist country lunched long-range missiles(twice) and conducted 3rd nuclear test, escalating tensions which could possibly lead to an all-out war. Korean Government failed to respond properly. However, escalation into an all-out war was deterred by the CFC immediately carrying out its peacetime duty(CODA). The US made a rapid dispatch of its augmentation forces(Aircraft carrier, nuclear-powered submarine, strategic bomber, F-22) to the Korean Peninsula. In recognition of the importance of the Combined Forces Command, since May 2013 the Park Geun-Hye Administration has been pushing ahead with re-postponement of Wartime Operational Control Transfer(which initially meant the disassembling of the CFC as of 1 December 2015) More recently, there has been a series of unusual indicators from the North. Judging from its inventory of 20 nuclear weapons, 1,000 ballistic missiles and biochemical weapons, it is safe to say that N. Korea has gained at least war deterrence against S. Korea. Normally a nation with nuclear weapons shrink its size of conventional forces, but the North is pursuing the opposite, rather increasing them. In addition, there was a change of war plan by N. Korea in 2010, changing 'Conquering the Korean Peninsula' to 'Negotiation after the seizure of the Greater Seoul Metropolitan Area(GSMA)' and establishing detailed plans for wartime projects. The change reflects the chain reaction in which requests from pro-north groups within the South will lead to the proclamation of war. Kim, Jeong-Un, leader of N. Korean regime, sent threatening messages using words such as 'exercising a nuclear preemptive strike right' and 'burning of Seoul'. Nam, Jae-June, Director of National Intelligence Service, stated that Kim, Jung-Un is throwing big talks, saying communization of the entire Korean Peninsula will come within the time frame of 3 years. Kim, Gwan-Jin, Defense Minister, shared an alarming message that there is a high possibility that the North will raise local provocations or a full-fledged war whenever while putting much emphasis on defense posture. As for the response concept of the Korean Government, it has been decided that 'ROK·US Combined Local Provocation Counter-Measure' will be adopted to act against local provocations from the North. Major provocation types include ▲ violation of the Northern Limit Line(NLL) with mobilization of military ships ▲ artillery provocations on Northwestern Islands ▲ low altitude airborne intrusion ▲ rear infiltration of SOF ▲ local conflicts within the Military Demarcation Line(MDL) ▲ attacking friendly ships by submarines. Counter-measures currently established by the US involves the support from USFK and USFJ. In order to keep the sworn promise, the US is reinforcing both USFK and USFJ. An all-out war situation will be met by 'CFC OPLAN5027' and 'Tailored Expansion Deterrence Forces' with the CFC playing a central role. The US augmentation forces stands at 690,000 troops, some 160 ships, 2,000 aircraft and this comprise 50% of US total forces, which is estimated to be ninefold of Korean forces. The CFC needs to be in center in handling both local provocations and an all-out war situation. However, the combat power of S. Korean conventional forces is approximately around 80% of that of N. Korea, which has been confirmed from comments made by Kim, Gwan-Jin, Defense Minister, during an interpellation session at the National Assembly. This means that S. Korean forces are not much growing. In particular, asymmetric capabilities of the North is posing a serious threat to the South including WMD, cyber warfare forces, SOF, forces targeting 5 Northwestern Islands, sub-surface and amphibious assault forces. The presence of such threats urgently requires immediate complementary efforts. For complementary efforts, the Korean Government should consider ① reinforcement of Korean forces; putting a stoppage to shrinking military, acquisition of adequate defense budget, building a missile defense and military leadership structure validity review, ② implementation of military tasks against the North; disciplinary measures on the sinking of ROKS Cheon-an/shelling of Yeonpyeong Islands, arrangement of inter-Korean military agreements, drawing lessons from studies on the correlation between aid for N. Korea, execution of inter-Korean Summit and provocations from the North, and ③ bolstering the ROK·US alliance; disregarding wartime operational control transfer plan(disassembling of CFC) and creation of a combined division.