• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.603-609
• /
• 2020

The purpose of this study is to research dampers, which are applied mainly to buildings adjacent to the coast, such as nuclear facilities, and used for ventilation and can safely protect lives and equipment in emergency situations. Comparing the equivalent stress for three models with hinge reinforcement and support reinforcement based on the early design model for Damper, in the Base model, the highest stress occurred in the part of hinge, especially in the centrally mounted hinge, and after reinforced the hinge, it was occurred in the rear support. For models reinforced hinges and supports, it is considered that reinforcement for stiffness will be required in the future as it entered within the range of allowable stress. For the safety factor distribution, the minimum safety ratio was sufficiently secured at least 1 and was high at the edge of the Damper frame and the Blade. As the hinge was reinforced, the safety factor distribution of Blade was increased, and it was verified that the safety factor was secured through the support reinforcement.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.210-216
• /
• 2014

본 논문은 승용 및 화물 차량의 주차 시, 사각지대에 의해 발생할 수 있는 위험요소를 차량의 전방, 후방에 장착된 카메라를 이용하여, 위험 요소 발견 시 신속히 상황을 대처할 수 있도록 운전자를 도와주는 차량용 전. 후방 영상 모니터링 시스템의 개발을 제안하였다. 임베디드 시스템(embedded system) 환경에서 두 개의 고해상도 영상 데이터를 TCP/IP 기반 네트워크로 전송하는 방법으로 하나의 SoC(System on Chip)와 두 개의 고해상도 CMOS(Complementary metal-oxide-semiconductor) 영상 센서를 사용 하였다. 영상 데이터를 TCP/IP 네트워크 기반으로 전송하기 위해서 두 개의 카메라에서 입력 받은 영상을 H.264 포맷으로 압축한 뒤에 실시간 전송 규약(Real-time Transport Protocol)을 이용해서 영상 데이터를 무선(Wi-Fi)으로 전송하였다. 무선 환경에서 발생할 수 있는 전송손실, 전송지연, 전송제한 등을 감안하여 H.264로 압축된 두 개의 영상 데이터의 비트레이트를 조절하여, 무선(Wi-Fi) 환경에서 최적의 전송 조건을 갖추기 위한 시스템을 구현하여 실험하였다.

• 한국전자파학회논문지
• /
• 제24권7호
• /
• pp.671-677
• /
• 2013

본 논문에서는 스마트 키의 정확한 인식 거리 예측을 위한 차량 LF 안테나의 근접 자계 분석 방법을 제안하였다. 모델링된 LF 안테나는 폴리에틸렌으로 절연 코팅이 된 전도성 도선이 페라이트 코어를 감고 있는 형상을 가지며, 상용 차량의 범퍼 프레임 내부에 장착되어 동작한다. 스마트 키의 최대 인식 거리는 범퍼에 장착된 LF 안테나의 근접 방사 패턴을 고려하여 총 9개의 방위각에서 측정하였으며, 각 방향에서 측정된 최대 인식 거리에서 스펙트럼 분석기를 이용하여 수신 파워를 측정하였다. 측정 결과, 차량에 장착된 LF 안테나를 기준으로 1.38 m부터 1.53 m 사이의 인식 거리를 가지며, 그때의 수신 파워는 -83.6 dBmW부터 -75.0 dBmW 사이의 레벨을 가진다. 측정과 동일한 조건으로 전자파 해석을 진행하여 예측된 근접 필드와 측정된 인식 거리 및 수신 전력을 분석하였으며, 그 결과 전자파 해석을 통해 스마트 키 인식 거리 예측 및 근접 필드 분석이 가능함을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제33권2호
• /
• pp.83-93
• /
• 2008

In order to save labor and cost, direct seeding has been considered as an important alternative to the machine transplanting in rice cultivation. Current direct seeding machines for rice in Korea drill irregularly under various operating conditions. This study was conducted to develope a precision seeder which enables the accurate, even-spaced in row placement of rice seeds at uniform depths of 3-4 cm on dry paddy. Design, construction and performance evaluation of the precision seeder were carried out. The tractor rear-mounted type 8-rows precision seeder which performs seeding in addition to fertilizing, ditching, and rotary tilling works on dry paddy was developed. Main components of the seeder were ditcher and leveller, rotary tiller, powered roller type furrow opener, seeding device, powered roller type furrow covering and firming device, hydraulic unit, seeding speed control system, power transmission system, hitch and frame. Ditching, furrow opening, and seed covering and firming performances were good and seeding depths of 2-4 cm could be maintained. Planting accuracies and planting precisions were within 13.6%, and 31.2%, respectively, for planting space of 15 cm, and seeding velocity of 0.5 m/s. These mean variations of average planting space were within 2.1 cm, and 90% of seeds in a hill were seeded within 4.7 cm of hill length, respectively. Error ratios between setting planting space and measured average planting space were shown within 6.7%. Therefore the seeder showed good planting performance up to seeding velocity of 0.5 m/s in field tests. And field capacity of the seeder was about 0.28 ha/hour.

• 한국농촌건축학회논문집
• /
• 제15권4호
• /
• pp.35-42
• /
• 2013

The study aims to investigate general characteristics of Jae-sil from an architectural perspective by grasping location, deployment, structure, and plan composition based on existing inhabited conditions in Jeollabukdo. Results derived from the study are as follows. First, the location of Jae-sil is classified into mountainous and village types, and the two types showed a similar distribution. The village type showed the most distribution in the foot of a mountain in the rear of village, while the mountainous type is close to graveyard. The Jae-sil were mostly exposed to south, southeast, and southeast, which was not significantly different from residence. For deployment of the Jae-sil, a "二" shaped house, where main quarter and gated building are parallel located, can be common, indicating that additional attached building is less required. Second, for the platform out of structural components, coursed masonry was conducted by using natural rocks, and placed were a prop on the platform, first line on processed foot stone, and others on natural foot stone. For pillar, front line round columns, while others square columns. The binding type of the upper part of pillar is dominated by jangyeosujang and sorosujang. For wooden frame structure, 5ryangs were the most distributed, and out of these, 1goju 5ryang was the most generally used. For a roof part, it was composed with gambrel roof with single eave, and the roof was constructed by placing traditional Korean tile roof on the top. Third, for a size of Jae-sil out of plan composition, although the facade and the side of it were presented in a diverse manner, 4 facade rooms and 1.5 side rooms were the most frequently presented, and all Jae-sil were equipped with front ceremonial space. For spatial composition of Jae-sil, main floored hall is placed at the center, and each room is placed on the left and right side to secure space for ancestral rite for participants of it, and for a house with 5 rooms or more, it shows that main floored hall and rooms are weighted from side to side.

• 건축역사연구
• /
• 제17권3호
• /
• pp.61-80
• /
• 2008

The purpose of this study is to discover the characteristics and the change of the framed structure with triple beam. 61 existing buildings with the triple beam structure were selected and analyzed extensively. The result of this study could be described in detail like below. The triple beam structure is used in the highly graded and symbolized building like the Buddhist sanctum and the Confucian sanctum. And the triple beam structure was chiefly used in $1600{\sim}1800's$. Generally, 1 Koju-type with Toikan(退間) is applied to the triple beam structure. Despite of the sameness of framed structure, there is a tendency that the rear Toikan(後退間) is used in the Buddhist sanctum and the front Toikan(前退間) is used in the Confucian sanctum. This different application of the Toikan(退間) resulted from the different spatial characteristics which reflect function and grade of the building. The application of Sangjungdori(上中道里, upper purlin) and two Danyeon(短椽, short rafter) is a necessary consequence, because Jungbo(중보, middle beam) is located between Daebo(대보, beam) and Jongbo(종보, small and high located beam) as an additional member of frame. And these are essential characteristics of the framed structure with triple beam. The triple beam structure is formed in a transitional period, as the result from eliminating the inner high-column from the 2 Koju and double beam structure. Though the Daebo is longer, the structure is more stable. But the rate of application of the triple beam structure is low, because it does not exceed the double beam structure in merits. Some of buildings with the triple beam structure has the asymmetrical characteristic in design, which is appeared in the latter period of Joseon Dynasty.

• 한국음향학회지
• /
• 제11권4호
• /
• pp.5-13
• /
• 1992

엔진의 가진력으로 인해 발생되는 차량의 진동은 승차감에 큰 영향을 미치며, 또한 엔진 마운트 계의 동역학적 특성은 차량의 진동 및 소음에 직접적인 영향을 준다. 본 논문에서는 승용 지이프차의 엔진 key-off시 엔진 가진력으로 인한 차체 흔들림(body shake)을 실험을 통하여 측정함과 동시에 매카니즘해석 전용 프로그램인 DADS를 이용한 컴퓨터 시뮬레이션을 통하여 고찰하였다. 컴퓨터 시뮬레이션 모델은 엔진, 후레임이 포함된 차체, 앞 엑슬 그리고 뒤 엑슬로 구성되며, 각 엑슬은 좌우에 타이어를 고려하였다. 실험에서 얻은 차체 흔들림의 실험 결과와 컴퓨터 시뮬레이션한 결과를 비교 검토하였으며, 검증된 컴퓨터 시뮬레이션 모델을 통하여 엔진 마운트 고무의 강성, 엔진마운트의 설치각도 및 마운트 위치를 변경하여 key-off 시 자체 흔들림을 고찰함으로써 엔진 key-off 시의 차체 흔들림의 감소를 확인하였다.

• 건축역사연구
• /
• 제15권4호
• /
• pp.57-73
• /
• 2006

To begin with the purpose of protecting human life from the exterior in the prehistoric age, architecture was nothing but a shelter without any relation between the exterior and the intoner. But, today, with the community developed, architecture can not be resisted with her own function and have to change of the reciprocal one. Different with the oriental architecture, we can see, western architecture has developed in the stream of the form. The main idea of the space in terms of the relation, above all, is mostly concerned with relation between the exterior and the interior like between the architecture and the city. So the role of the facade in depth is the intermediation which consist to the relation in the exterior and interior of architecture. Considering a relation between two elements; the exterior and the interior, we can be inspired in the case of paintings, especially in the works of the Paul $C\acute{e}zanne$. $C\acute{e}zanne$ originally show the depth of space by different disposition of three parts : the background, the objects and intermediate space between the former. For instance, different with the other painters who put the background rear in the canvas and objects in the front of the background, $C\acute{e}zanne$ took the background and objects a same value and assure a depth in space by virtue of the intermediate space. Finally, by putting the background in forward of layer in the canvas and objects situated behind the background, the depth of the space can be occurred. Same as the idea of $C\acute{e}zanne$, Giuseppe Terragni and jean Nouvelle in architecture also intensify their effects through the activation of intermediate space between the interior facade and exterior frame. Not limited in the relation with the architecture and the city, space in relation gives us a higher quality of architectural promenade in depth.

• 한국농촌건축학회논문집
• /
• 제22권2호
• /
• pp.1-8
• /
• 2020

This study is intended to derive the adaptive reuse techniques through the history and aspects of new construction, extension, repair, and other works, limited to the deep and narrow lots facing Seongan-gil and Nammun-gil in Nammun-ro 2 ga of Cheongju, the historic urban area. The results are as follows. 1) In the case of newly built reinforced concrete buildings, the central part of the top floor of the residence or all floors are opened to the open space(void) to facilitate lighting and ventilation. This is developed as a convection phenomenon due to the temperature difference from the slits between buildings, which affects the entire air flow of the block. 2) The buildings of extension and repair are composed of two-story masonry or steel frame, both the front store facing the road and the house on the back, but it looks like one because it is in contact with each other. If only a small gap between the front and rear buildings is restored to an external space or a space equipped with sun light, a small breath can be provided in lighting and ventilation. 3) The existing two-story wooden stores and houses have lost their external space due to repairs. With minimal intervention to restore the small courtyard, slits, and space under the eaves, it will not only improve lighting and ventilation, but also create a unique appearance as a segment of the elongated store.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4142-4148
• /
• 2013

경사지 과수의 효율적인 재배 및 관리를 위해 과수원 전용 고소 작업차량 사용이 늘어나고 있다. 이러한 이유로 작업자 안전을 위해 고소 작업차의 안정성에 대해 연구가 요구되고 있다. 본 연구는 경사지 흙길을 주행할 수 있는 4개의 바퀴와 2개의 직교 좌표계 적재함을 가진 과수원 차량의 안정성 평가에 대한 연구이다. 차량 메커니즘에 대한 다물체 동역학(MBD) 해석을 통하여 19.2, $34.6^{\circ}$의 좌우 및 상하 방향의 전복각을 계산할 수 있었다. 바퀴들의 주행 저항과 소요 동력을 결정하였다. 그리고 적재함 프레임의 유한요소해석(FEA)를 통하여 최대응력 146 MPa로 구조적으로 안정하다. 따라서 적재함을 가진 바퀴형 과수원 차량은 정적 및 동적 안정성을 가짐을 알 수 있었다.