• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.570-578
• /
• 2001

Boundary scan architecture test methodology was introduced to facilitate the testing of complex printed circuit board. The boundary scan architecture has a tremendous potential for real time monitoring of the operational status of a system without interference of normal system operation. In this paper, a new type of embedded controller for real time monitoring of the operational status of a system is proposed and designed by using boundary scan architecture. The proposed real time monitoring embedded controller consists of test access port controller and an embedded controller proposed real time monitoring embedded controller using boundary scan architecture can save the hard-wire resource and can easily interface with boundary scan architecture chip. Experimental results show that the real time monitoring using proposed embedded controller is more effective then the real time monitoring using host computer.

• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.199-207
• /
• 2021

It is very important to support real-time on the inspection equipment based on Windows. In particular, in the system using MIL-STD-1553B communication, which is widely used in military weapon systems, real-time is required for inspection equipment that uses mostly platforms based on Windows such as Industrial PCs. However, in order to use a complete real-time operating system such as VxWorks, the purchase cost is expensive and the implementation is complicated on the system, so it is not suitable for inspection equipment that requires simple functions to just check go or no-go. Therefore, in this paper, a Real-Time implanted Kernel(RTiK) in the Windows kernel is implanted in order to improve these defects, and real-time performance is implemented for periodically MIL-STD-1553B communication by Deferred Procedure Call(DPC) of Windows. Also, it was verified that the period of up to 2ms was guaranteed with a RDTSC into the EDX:EAX registers for measuring the periodicity.

• Journal of Korea Multimedia Society
• /
• v.19 no.10
• /
• pp.1759-1766
• /
• 2016

We can implement the virtual touch recognition system by mounting the virtual touch algorithm into an embedded device connected to a depth camera. Since the computing performance is limited in embedded system, the real-time processing of recognizing the virtual touch is difficult when the resolution of the depth image is large. In order to resolve the problem, this paper improves the algorithms of binarization and labeling that occupy a lot of time in all processing of virtual touch recognition. It processes the binarization and labeling in only necessary regions rather than all of the picture. By appling the proposed algorithm, the system can recognize the virtual touch in real-time as about 31ms per a frame in the depth image that has 640×480 resolution.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.336-343
• /
• 2017

We propose a real time personalized recommendation algorithm on the mobile device. We use a unified collaborative filtering with reduced data. We use Fuzzy C-means clustering to obtain the reduced data and Konohen SOM is applied to get initial values of the cluster centers. The proposed algorithm overcomes data sparsity since it extends data to the similar users and similar items. Also, it enables real time service on the mobile device since it reduces computing time by data clustering. Applying the suggested algorithm to the MovieLens data, we show that the suggested algorithm has reasonable performance in comparison with collaborative filtering. We developed Android-based smart-phone application, which recommends restaurants with coupons and restaurant information.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.1-10
• /
• 2010

As recent fusion industry and ubiquitous technology have grown fast, network contents, which require high load, are provided in various infrastructures and facilities such as u-city and smart phones. Therefore, it is anticipated that the playback quality of multimedia compared to network loads degrades dramatically due to the drastic increment of real-time reference of conventional high load contents (eg. multimedia data). In this paper, we improved the method of the traffic assignment based on MPP which elevated the playback quality of multimedia by assigning discriminately the possible traffic of MMS with TP coefficients. When the TP coefficient which combines content preference with media preference was applied to a real-time traffic assignment scheduler, the simulation results showed that the multimedia playback stream was assigned within the possible traffic of a server. The real-time scheduling algorithm was improved by using the TP coefficient that combines the time-dependent image contents and the weighted value of media preference. It was observed from the experiment that the loss of the possible traffic decreases to 3.91% and 3.88% for three and four clients respectively.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.95-105
• /
• 2021

In the case of laptops and tablet PC's that replace desktop, it uses the Windows operating system to provide various functions depending on operating system dependency, the Windows operating system does not support real-time processing because it uses multi-level feedback queue scheduling that extends round-robin scheduling. Also, since the initial value of Local APIC Counter can not be obtained from the Windows 8, the real-time processing function provided through the existing RTiK does not work. In this paper, we calculate Local APIC Counter value by using MSR_FSB_FREQ register to support real-time processing function on tablet PC's. We designed and implemented RTiK+, which provides real-time processing function to guarantee the periodicity by calculating the operation time of accurate timer. In order to verify and evaluate the performance of the implemented the RTiK+, the period was measured by using the Read Time-Stamp Counter(RDTSC) instruction and it was confirmed that it operates normally at 1ms and 0.1ms period.

• Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.31-42
• /
• 2000

• Convergence Security Journal
• /
• v.2 no.2
• /
• pp.1-8
• /
• 2002

Real-Time Protocol (RTP) is used for multimedia information transmission and RTP payload must be encrypted for providing multimedia information security. Encryption/decryption delay is minimized, because there are constraints in transporting a multimedia data through the Internet. Therefore, encryption algorithm is changed with considering network traffic and load. Doting many users participate in the same multimedia service, an user who already left the service can receive and decrypt the RTP payload because of knowing the encryption key. In this paper, Security Control Protocol for RTP is designed and implemented for changing the encryption algorithm and the key.

• Convergence Security Journal
• /
• v.2 no.1
• /
• pp.49-57
• /
• 2002

Real-Time Protocol (RTP) is used for multimedia information transmission and RTP payload must be encrypted for providing multimedia information security. Encryption/decryption delay is minimized, because there are constraints in transporting a multimedia data through the Internet. Therefore, encryption algorithm is changed with considering network traffic and load. During many users participate in the same multimedia service, an user who already left the service can receive and decrypt the RTP payload because of knowing the encryption key. In this paper, Security Control Protocol for RTP is designed and implemented for changing the encryption algorithm and the key.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.9
• /
• pp.39-48
• /
• 2009

Human face tracking has gradually become an important issue in applications for portable multimedia devices such as digital camcorder, digital still camera and cell phone. Current embedded face tracking software implementations lack the processing abilities to track faces in real time mobile video processing. In this paper, we propose a power efficient hardware-based face tracking architecture operating in real time. The proposed system was verified by FPGA prototyping and ASIC implementation using Samsung 65nm CMOS process. The implementation result shows that tracking speed is less than 8.4 msec with 150K gates and 20 mW average power consumption. Consequently it is validated that the proposed system is adequate for portable multimedia device.