• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.184-192
• /
• 2022

Valve internal leakage is caused by damage to the internal parts of the valve, resulting in accidents and shutdowns of the piping system. This study investigated the possibility of a real-time leak detection method using the acoustic emission (AE) signal generated from the piping system during the internal leakage of a butterfly valve. Datasets of raw time-domain AE signals were collected and postprocessed for each operation mode of the valve in a systematic manner to develop a data-driven model for the detection and classification of internal leakage, by applying machine learning algorithms. The aim of this study was to determine whether it is possible to treat leak detection as a classification problem by applying two classification algorithms: support vector machine (SVM) and convolutional neural network (CNN). The results showed different performances for the algorithms and datasets used. The SVM-based binary classification models, based on feature extraction of data, achieved an overall accuracy of 83% to 90%, while in the case of a multiple classification model, the accuracy was reduced to 66%. By contrast, the CNN-based classification model achieved an accuracy of 99.85%, which is superior to those of any other models based on the SVM algorithm. The results revealed that the SVM classification model requires effective feature extraction of the AE signals to improve the accuracy of multi-class classification. Moreover, the CNN-based classification can be a promising approach to detect both leakage and valve opening as long as the performance of the processor does not degrade.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.185-190
• /
• 2023

Recently, tracking radar requires the development of millimeter wave tracking radar to acquire target information with high resolution in various environments. The development of millimeter wave tracking radar requires the development of transmission and receiving components that can be applied to the millimeter wave tracking radar, as well as verification of the applicability of the tracking radar. In order to verify the applicability of the developed transmitting and receiving components, it is necessary to develop a signal acquisition device that can control the transmitting and receiving components using the operating concept of a tracking radar and check the status of the received signal. In this paper, we implemented a signal acquisition device that can confirm the applicability of components developed for millimeter wave tracking radar. The signal acquisition device was designed to process in real time the OOOMHz center frequency and OOMHz bandwidth signals input from 4 channels to verify the received signal. In addition, component control applying the tracking radar operation concept was designed to be controlled by communication such as RS422, RS232, and SPI and generation of control signals for the transmission and receiving time. Lastly, the implemented signal acquisition device was verified through a signal acquisition device performance test.

• Journal of KIISE:Software and Applications
• /
• v.35 no.3
• /
• pp.149-161
• /
• 2008

As Programmable Logic Controllers(PLCs) are frequently used to implement real-time safety critical software, testing of PLC software is getting more important. We propose a structural testing technique on Function Block Diagram(FBD) which is one of the PLC programming languages. In order to test FBD networks, we define templates for function blocks including timer function blocks and propose an algorithm based on the templates to transform a unit FBD into a flowgraph. We generate test cases by applying existing testing techniques to the generated flowgraph. While the existing FBD testing technique do not consider infernal structure of FBD to generate test cases and can be applied only to FBD from which the specific intermediate model can be generated, this approach has advantages of systematic test case generation considering infernal structure of FBD and applicability to any FBD without regard to its intermediate format. Especially, the proposed method enables FBD networks including timer function blocks to be tested thoroughly. To demonstrate the effectiveness of the proposed method, we use trip logic of bistable processor of digital nuclear power plant protection systems which is being developed in Korea.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1460-1471
• /
• 2007

A 3-Dimensional engine in a mobile embedded device is divided into a C-based OpenGL/ES and a Java-based JSR184 which interprets and executes a byte code in a real-time. In these two standards, the JSR184 supporting Java objects uses more processor resources than an OpenGL/ES and thus has a constraint when it is used in an embedded device with a limited computing power. On the other hand, 3-Dimensional contents employed in existing personal computer are created by utilizing advantages of Java and secured numerous users in European market, due to the good quality in contents and extensive service in a commercial network, GSM. Because of the reason, a mobile embedded device used in a GSM network needs a JSR184 which can provide an existing Java-based 3-Dimensional contents without extra conversion processes, but the current version of Java-based 3-Dimensional engine has drawbacks in application to commercial products because it requires more computing power than the mobile embedded device. This paper proposes a binding technique with the advantages of Java objects to improve a processing speed of 3-Dimensional contents in limited resources of a mobile embedded device. The technique supports a JSR184 standard interface in the upper layer to utilize 3-Dimensional contents using Java, employs a different code-conversion language, KNI(Kilo Native Interface), in the middle layer to interface between OpenGL/ES and JSR184, and embodies an OpenGL/ES standard in the lower layer. The validity of the binding technique is demonstrated through a simulator and a FPGA embedding an ARM.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.23-32
• /
• 2008

According to recent frequent local flash flood due to climate change, the very short-term rainfall forecast using remotely sensed rainfall like radar is necessary to establish. This research is to evaluate the feasibility of GIS-based distributed model coupled with radar rainfall, which can express temporal and spatial distribution, for multipurpose dam operation during flood season. $Vflo^{TM}$ model was used as physically based distributed hydrologic model. The study area was Yongdam dam basin ($930\;km^2$) and the 3 storm events of local convective rainfall in August 2005, and the typhoon.Ewiniar.and.Bilis.collected from Jindo radar was adopted for runoff simulation. Distributed rainfall consistent with hydrologic model grid resolution was generated by using K-RainVieux, pre-processor program for radar rainfall. The local bias correction for original radar rainfall shows reasonable results of which the percent error from the gauge observation is less than 2% and the bias value is $0.886{\sim}0.908$. The parameters for the $Vflo^{TM}$ were estimated from basic GIS data such as DEM, land cover and soil map. As a result of the 3 events of multiple peak hydrographs, the bias of total accumulated runoff and peak flow is less than 20%, which can provide a reasonable base for building operational real-time short-term rainfall-runoff forecast system.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2013

As it is changing into aging society, rehabilitation, welfare and sports industry markets are being expanded fast. Especially, the field of vital signals interface to control welfare instruments like wheelchair, rehabilitation ones like an artificial arm and leg and general electronic ones is a new technology field in the future. Also, this technology can help not only the handicapped, the old and the weak and the rehabilitation patients but also the general public in various application field. The commercial bio-signal measurement instruments and interface systems are complicated, expensive and large-scaled. So, there are a lot of limitations for using in real life with ease. this thesis proposes a wireless transmission interface system that uses EMG(electromyogram) signals and a control module to manipulate hardware systems with portable size. We have designed a hardware module that receives the EMG signals occurring at the time of wrist movement and eliminated noises with filter and amplified the signals effectively. DSP(Digital Signal Processor) chip of TMS320F2808 which was supplied from TI company was used for converting into digital signals from measured EMG signals and digital filtering. We also have used PCA(Principal Component Analysis) technique and classified into four motions which have right, left, up and down direction. This data was transmitted by wireless module in order to display at PC monitor. As a result, the developed system obtains recognition success ratio above 85% for four different motions. If the recognition ratio will be increased with more experiments. this implemented system using EMG wrist direction signals could be used to control various hardware systems.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.2
• /
• pp.397-409
• /
• 2014

According to the Personal Information Protection Act(PIPA) which is legislated in March 2011, the individual or company that handles personal information, called Personal information processor, should encrypt some kinds of personal information kept in his Database. For convenience sake we call it DB Encryption in this paper. Law enforcement and the implementation agency accordingly are being strengthen the supervision that the status of DB Encryption is being properly applied and implemented as the PIPA. However, the process of DB Encryption is very complicate and difficult as well as there are many factors to consider in reality. For example, there are so many considerations and requirements in the process of DB Encryption like pre-analysis and design, real application and test, etc.. And also there are surely points to be considered in related system components, business process and time and costs. Like this, although there are plenty of factors significantly associated with DB Encryption, yet more concrete and realistic validation entry seems somewhat lacking. In this paper, we propose a realistic DB Encryption Assurance Framework that it is acceptable and resonable in the performance of the PIPA duty (the aspect of the individual or company) and standard direction of inspection and verification of DB Encryption (the aspect of law enforcement).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.181-192
• /
• 2022

Active vibration control system(AVCS) for helicopter enables to control the vibration generated from the main rotor and has the superb vibration reduction performance with low weight compared passive vibration reduction device. In this paper, FxLMS algorithm-based vibration control software of the light civil helicopter tansmits the control command calculated using the signals of the tachometer and accelerometers to the circular force generator(CFG) is developed and verified. According to the RTCA DO-178C/DO-331, the vibration control software is developed through the model based design technique, and real-time operation performance is evaluated in PILS(processor in-the loop simulation) and HILS(hardware in-the loop simulation) environments. In particular, the reliability of the software is improved through the LDRA-based verification coverage in the PIL environments. In order to AVCS to light civil helicopter(LCH), the dynamic response characteristic model is obtained through the ground/flight tests. AVCS configuration which exhibits the optimal performance is determined using system optimization analysis and flight test and obtain STC certification.

• The Korean Journal of Nuclear Medicine
• /
• v.37 no.5
• /
• pp.288-300
• /
• 2003

Purpose: To obtain regional blood flow and tissue-blood partition coefficient with time-activity curves from ${H_2}^{15}O$ PET, fitting of some parameters in the Kety model is conventionally accomplished by nonlinear least squares (NLS) analysis. However, NLS requires considerable compuation time then is impractical for pixel-by-pixel analysis to generate parametric images of these parameters. In this study, we investigated several fast parameter estimation methods for the parametric image generation and compared their statistical reliability and computational efficiency. Materials and Methods: These methods included linear least squres (LLS), linear weighted least squares (LWLS), linear generalized least squares (GLS), linear generalized weighted least squares (GWLS), weighted Integration (WI), and model-based clustering method (CAKS). ${H_2}^{15}O$ dynamic brain PET with Poisson noise component was simulated using numerical Zubal brain phantom. Error and bias in the estimation of rCBF and partition coefficient, and computation time in various noise environments was estimated and compared. In audition, parametric images from ${H_2}^{15}O$ dynamic brain PET data peformed on 16 healthy volunteers under various physiological conditions was compared to examine the utility of these methods for real human data. Results: These fast algorithms produced parametric images with similar image qualify and statistical reliability. When CAKS and LLS methods were used combinedly, computation time was significantly reduced and less than 30 seconds for $128{\times}128{\times}46$ images on Pentium III processor. Conclusion: Parametric images of rCBF and partition coefficient with good statistical properties can be generated with short computation time which is acceptable in clinical situation.