• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.66-67
• /
• 2006

본 논문은 실시간 디지털 시뮬레이터(Real Time Digital Simulator, RTDS)를 이용한 송전계통의 자동 재폐로 모의 교육훈련시스템 개발에 대해 요약하였다. 본 논문에서 개발한 모의 훈련 코스는 3상 일괄 재폐로와 1상 및 3상 재폐로의 두 가지 부분으로 나뉘어 구성되었다. RTDS를 이용한 모의 파일의 구성 시 각 계통은 양단에 거리계전기를 설치한 것으로 모의하였으며 154kV 계통의 경우 송전단은 실제 거리계전기를 이용하여 구성하였다. 1상 및 3상 재폐로의 경우 1선지락 고장에 대해서는 해당상만 트림 및 재폐로를 하도록 하고 나머지 고장에 대해서는 3상 일괄트립 및 재폐로가 되도록 모의하였으며 대상 계통은 345kV의 전형적인 송전계통을 대상으로 하였다. 리셋 시간의 모의 훈련을 위해 현재 국내 리셋시간 기준치 이내에 또 다른 고장이 발생했을 경우와 기준시간 이상 경과한 후에 고장이 발생한 경우를 나누어 모의할 수 있도록 구성하였다. 고장종류, 고장지속시간, 1상 및 3상 재폐로 선택, 재폐로 횟수 및 재폐로 시간 등은 현재 한국전력의 재폐로 규정에 언급된 것을 모의하는 것은 물론 사용자 임의로 변경이 가능하도록 구성하였다. 본 논문에서 개발한 모의 훈련코스는 송전계통의 자동재폐로에 대한 실무자들의 이해 증진을 위한 교육용으로 사용될 수 있음은 물론 보호 계전기 등의 시험을 위해서도 활용될 수 있을 것으로 기대한다.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.240-247
• /
• 2007

This paper presents an implementation of the generator protective relay using Real Time Digital Simulator (RTDS) user defined component (UDC) model designed to facilitate the investigation and evaluation of protective relays. The UDC for RTDS is a convenient model that allows user to develop new component models and run them on the RTDS. The developed model has major features related to the development of six models such as distance, frequency, reverse power, volts per Hz, over voltage, and out-of-step relays. Also, the generator relay models have been used to support and enhance power engineering education at both the undergraduate and graduate levels. The developed model functions are verified and tested by both static test and dynamic test. The simulation results show the capabilities of the developed generator relay using RTDS UDC.

• 항공우주기술
• /
• 제3권1호
• /
• pp.222-231
• /
• 2004

우주센터의 발사관제시스템은 우주센터 내에서 이루어지는 발사체에 대한 각종 지상시험과 발사시험시 발사체, 발사대, 추진지상공급계 등 외부 시스템과의 인터페이스를 통한 데이터 모니터링 및 제어를 수행하게 되며 실시간 원격제어 시스템, 시뮬레이션 시스템, 데이터 서버, 외부 네트워크 등으로 이루어져 있다. 발사체 시뮬레이션 시스템 개발의 목적은 발사체를 모사하여 지상 발사관제시스템 구축시 성능시험 및 검증을 수행하는 것이다. 본 논문에서는 시뮬레이터 시스템의 개요, 주요 장비에 대한 개념설계 및 실시간 데이터 처리에 대한 시험평가를 다루었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.63-70
• /
• 2006

Now AIS (Automatic Identification System) has been under full operation for ocean-going vessels, and it is expected not only to identify target ships but also to take collision avoidance using AIS information with Radar and ARFA information in restricted waters. AIS information is very useful not only for target identifications but also for taking collision avoidance, but OOW (Officer OF Watch-keeping) should take care of systematic observation of AIS because of miss-operation or malfunction of AIS. In this paper, we propose the application of Onboard Ship Handling Simulator with visual system displayed 3D scene added AIS performance such as blind areas of Island, microwave propagation, ok. and maneuvering simulation using TK models, applied real time AIS information and research the effectiveness of this system for ship handling in restricted waters, and discus the principal issues through the on board experiments. Conclusion will be expected that; 1) systematic observation of ASS information using visual scene simulator with AIS information will be effectively done, 2) observation compared with Radar and ARPA information will be also useful to make a systematic observation, 3) using the recording and replay function of simulation will be useful not only for systematic observation but also to measure and to encourage officers' skill.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1433-1437
• /
• 2005

Until now, strain gage technique and accelerometer for the diagnosis safety of constructions are used widely. However, the limits of these methods are revealed. But Electronic Speckle Pattern Interferometry(ESPI) that uses Pulse Laser is noncontact, whole-field, real-time measuring method also dull to disturbance and can achieve test result in a very short time. It has various strong point in spot application, swift establishment, and dynamic conduct analysis for the entire field of Laser illuminate. This author analyzed vibration characteristic of using the Pulse ESPI System, the diagnosis safety of bridges, to simplify the analysis of the dynamic conduct of a large construction.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.377-383
• /
• 2006

This paper presents evaluation and comparisons of manual driving and driving with intelligent cruise control(ICC) systems. An intelligent vehicle cruise control strategy has been designed to achieve natural vehicle behavior of the controlled vehicle that would make human driver feel comfortable and therefore would increase driver acceptance. The evaluation and comparisons of the ICC and manual driving have been conducted using real-world vehicle driving data and an ICC vehicle simulator.

• International journal of advanced smart convergence
• /
• 제5권1호
• /
• pp.34-46
• /
• 2016

Networked Control System (NCS) has evolved in the past decade through the advances in communication technology. The problems involved in NCS are broadly classified into two categories namely network issues due to network and control performance due to system network. The network problems are related to bandwidth allocation, scheduling and network security, and the control problems deal with stability analysis and delay compensation. Various delays with variable length occur due to sharing a common network medium. Though most delays are very less and mostly neglected, the network induced delay is significant. It occurs when sensors, actuators, and controllers exchange data packet across the communication network. Networked induced delay arises from sensor to controller and controller to actuator. This paper presents an adaptive delay compensation process for efficient control. Though Smith predictor has been commonly used as dead time compensators, it is not adaptive to match with the stochastic behavior of network characteristics. Time delay adaptive compensation gives an effective control to solve dead time, and creates a virtual environment using the plant model and computed delay which is used to compensate the effect of delay. This approach is simulated using TrueTime simulator that is a Matlab Simulink based simulator facilitates co-simulation of controller task execution in real-time kernels, network transmissions and continuous plant dynamics for NCS. The simulation result is analyzed, and it is confirmed that this control provides good performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.103-103
• /
• 2000

In this paper to cope with the reduction of products life-cycle as the variety of products along with the various demands of consumers, a virtual simulator is developed to make the changeover of manufacturing line efficient to embody a virtual simulation similar to a real manufacturing line. The developed virtual simulator can design a layout of a factory and make the time scheduling. Every factory has one simulator so that one product can be manufactured in the factories to use them as virtual factories. We suggest a scheme that heightens the agility to the diversity of manufacturing models by making the information of manufacturing lines and products models to be shared. The developed unit simulator can construct a proper virtual manufacturing line along with the required process of products using several kinds of operator and work cell. A user with the simulator can utilize an interface that makes one to manage the separate task process for each manu(acturing module, change operator components and work cells, and easily teach tasks of each task module. The developed simulator was made for users convenience by Microsoft Visual C++ 6.0 that can develop a program supplying graphic user interface environment and by OpenGL of the Silicon Graphics as a graphic library to embody 3D graphic environment. Also, we show that the simulator can be used efficiently for the agile manufacturing by the communication among the factories being linked by TCP/IP and a hybrid database system made by a hierarchical model and a relational model being developed to standardize the data information.

• Clinical Endoscopy
• /
• 제56권5호
• /
• pp.604-612
• /
• 2023

Background/Aims: We developed a new endoscopic submucosal dissection (ESD) simulator and evaluated its efficacy and realism for use training endoscopists. Methods: An ESD simulator was constructed using polyvinyl alcohol hydrogel sheets and compared to a previous ESD simulator. Between March 1, 2020, and December 30, 2021, eight expert endoscopists from three different centers analyzed the procedure-related factors of the simulator. Five trainees performed gastric ESD exercises under the guidance of these experts. Results: Although the two ESD simulators provided overall favorable outcomes in terms of ESD-related factors, the new simulator had several benefits, including better marking of the target lesion's limits (p<0.001) and overall handling (p<0.001). Trainees tested the usefulness of the new ESD simulator. The complete resection rate improved after 3 ESD training sessions (9 procedures), and the perforation rate decreased after 4 sessions (12 procedures). Conclusions: We have developed a new ESD simulator that can help beginners achieve a high level of technical experience before performing real-time ESD procedures in patients.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권3호
• /
• pp.54-58
• /
• 2006

In this paper, authors developed a real-time simulation algorithm for the power device application of HTS(High Temperature Superconducting) wire by using Real Time Digital Simulator(RTDS). At present, in order to extend the power capacity of some area where has a serious problem of power quality. especially metropolitan complex city, there are so many problems such as right of way for power line routes. space for downtown substations. and the environmental protection, etc. HTS technology can be useful to overcome this problem. Recently, according to the advanced HTS technology, the power application is being researched well. Simulation is required for safety before installation of HTS power cable, a fabrication model used at the power system simulation. This paper describes a real time digital simulation method for the application of HTS wire to power device. For the simulation analysis, test sample of HTS wire was actually manufactured. And the transient phenomenon of the HTS wire was analysed in the simulated utility power grid. This simulation method is the world first trial in order to obtain much better information for installation of HTS power device into a utility network.