• Earthquakes and Structures
• /
• v.11 no.3
• /
• pp.483-503
• /
• 2016

This study aims to evaluate seismic performance of existing low and mid-rise reinforced concrete buildings by comparing their displacement capacities and displacement demands under selected ground motions experienced in Turkey as well as demand spectrum provided in 2007 Turkish Earthquake Code for design earthquake with 10% probability of exceedance in 50 years for soil class Z3. It should be noted that typical residential buildings are designed according to demand spectrum of 10% probability of exceedance in 50 years. Three RC building sets as 2-, 4- and 7-story, are selected to represent reference low-and mid-rise buildings located in the high seismicity region of Turkey. The selected buildings are typical beam-column RC frame buildings with no shear walls. The outcomes of detailed field and archive investigation including approximately 500 real residential RC buildings established building models to reflect existing building stock. Total of 72 3-D building models are constructed from the reference buildings to include the effects of some properties such as structural irregularities, concrete strength, seismic codes, structural deficiencies, transverse reinforcement detailing, and number of story on seismic performance of low and mid-rise RC buildings. Capacity curves of building sets are obtained by nonlinear static analyses conducted in two principal directions, resulting in 144 models. The inelastic dynamic characteristics are represented by "equivalent" Single-Degree-of- Freedom (ESDOF) systems using obtained capacity curves of buildings. Nonlinear time history analysis is used to estimate displacement demands of representative building models idealized with (ESDOF) systems subjected to the selected ground motion records from past earthquakes in Turkey. The results show that the significant number of pre-modern code 4- and 7-story buildings exceeds LS performance level while the modern code 4- and 7-story buildings have better performances. The findings obviously indicate the existence of destructive earthquakes especially for 4- and 7-story buildings. Significant improvements in the performance of the buildings per modern code are also obvious in the study. Almost one third of pre-modern code buildings is exceeding LS level during records in the past earthquakes. This observation also supports the building damages experienced in the past earthquake events in Turkey.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.3
• /
• pp.283-290
• /
• 2008

Satellite formation flying can provide the platform for interferometric observation to acquire the precise data and ensure the flexibility for space mission. This paper presents development and verification of an algorithm to estimate the baseline between formation flying satellites. To estimate a baseline(relative navigation) in real time, EKF(Extended Kalman Filter) and UKF(Unscented Kalman Filter) are used. Measurements for updating a state-vector in Kalman Filter are GPS single difference data. In results, The position errors in estimated baseline are converged to less than ${\pm}1m$ in both EKF and UKF. And as using the two types of Kalman filter, it is clear that the unscented Kalman filter shows a relatively better performance than the extended Kalman filter by comparing an efficiency to the model which has a non-linearity.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.2
• /
• pp.240-248
• /
• 1998

The plasma chemical vapor deposition is one of the most utilized techniques for the diamond growth. As the applications of diamond thin films prepared by plasma chemical vapor deposition(CVD) techniques become more demanding, improved fine-tuning and control of the process are required. The important parameters in diamond film deposition include the substrate temperature, $CH_4/H_2$ gas flow ratio, total, gas pressure, and gas excitation power. With the spectroscopic ellipsometry, the substrate temperature as well as the various parameters of the film can be determined without the physical contact and the destructiveness under the extreme environment associated with the diamond film deposition. It is introduced how the real-time spectroscopic ellipsometry is used and the data are analyzed with the view of getting the growth condition and the accompanied features for a good quality of diamond films. And it is determined the important parameters during the diamond film growth, which include the final sample will be measured with Raman spectroscopy to confirm the diamond component included in the film.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.12
• /
• pp.46-54
• /
• 1998

In this paper we propose a fast adaptive image restoration filter using DCT-based block classification for reducing block artifacts in compressed images. In order to efficiently reduce block artifacts, edge direction of each block is classified by using the DCT coefficients, and the constrained least square (CLS) on the observation that the quantization operation in a series of coding process is a nonlinear and many-to-one mapping operator. And then we propose an approximated version of constrained optimization technique as a restoration process for removing the nonlinear and space-varying degradation operator. For real-time implementation, the proposed restoration filter can be realized in the form of a truncated FIR filter, which is suitable for postprocessing reconstructed images in HDTV, DVD, or video conference systems.

• Atmosphere
• /
• v.22 no.2
• /
• pp.233-243
• /
• 2012

The Barnes scheme is used in Digital Forecast System (DFS) of the Korea Meteorological Administration (KMA) for real-time analysis. This scheme is an objective analysis scheme with a distance-dependent weighted average. It has been widely used for mesoscale analyses in limited geographic areas. The isotropic Gaussian weight function with a constant effective radius might not be suitable for certain conditions. In particular, the analysis error can be increased for stations located near mountains. The terrain of South Korea is covered with mountains and wide plains that are between successive mountain ranges. Thus, it is needed to consider the terrain effect with the information of elevations for each station. In order to improve the accuracy of the temperature objective analysis, we modified the weight function which is dependent on a distance and elevation in the Barnes scheme. We compared the results from the Barnes scheme used in the DFS (referred to CTL) with the new scheme (referred to EXP) during a year of 2009 in this study. The analysis error of the temperature field was verified by the root-mean-square-error (RMSE), mean error (ME), and Priestley skill score (PSS) at the DFS observation stations which is not used in objective analysis. The verification result shows that the RMSE and ME values are 1.68 and -0.41 in CTL and 1.42 and -0.16 in EXP, respectively. In aspect of spatial verification, we found that the RSME and ME values of EXP decreased in the vicinity of Jirisan (Mt. Jiri) and Taebaek Mountains. This indicates that the new scheme performed better in temperature verification during the year 2009 than the previous scheme.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.3849-3856
• /
• 2015

Background: Cholangiocarcinoma (CCA), or bile duct cancer, is incurable with a high mortality rate due to a lack of effective early diagnosis and treatment. Identifying cytoplasmic membrane proteins of invasive CCA that facilitate cancer progression would contribute toward the development of novel tumor markers and effective chemotherapy. Materials and Methods: An invasive CCA cell line (KKU-100) was stimulated using TNF-${\alpha}$ and then biotinylated and purified for mass spectrometry analysis. Novel proteins expressed were selected and their mRNAs expression levels were determined by real-time RT-PCR. In addition, the expression of ALCAM was selected for further observation by Western blot analysis, immunofluorescent imaging, and antibody neutralization assay. Results: After comparing the proteomics profile of TNF-${\alpha}$ induced invasive with non-treated control cells, over-expression of seven novel proteins was observed in the cytoplasmic membrane of TNF-${\alpha}$ stimulated CCA cells. Among these, ALCAM is a novel candidate which showed significant higher mRNA- and protein levels. Immunofluorescent assay also supported that ALCAM was expressed on the cell membrane of the cancer, with increasing intensity associated with TNF-${\alpha}$. Conclusions: This study indicated that ALCAM may be a novel protein candidate expressed on cytoplasmic membranes of invasive CCA cells that could be used as a biomarker for development of diagnosis, prognosis, and drug or antibody-based targeted therapies in the future.

• Journal of the Korean Data and Information Science Society
• /
• v.28 no.6
• /
• pp.1245-1255
• /
• 2017

The online learning is a process of obtaining the solution for a given objective function where the data is accumulated in real time or in batch units. The stochastic gradient descent method is one of the most widely used for the online learning. This method is not only easy to implement, but also has good properties of the solution under the assumption that the generating model of data is homogeneous. However, the stochastic gradient method could severely mislead the online-learning when the homogeneity is actually violated. We assume that there are two heterogeneous generating models in the observation, and propose the a new stochastic gradient method that mitigate the problem of the heterogeneous models. We introduce a robust mini-batch optimization method using statistical tests and investigate the convergence radius of the solution in the proposed method. Moreover, the theoretical results are confirmed by the numerical simulations.

• Journal of the Korean Home Economics Association
• /
• v.39 no.3
• /
• pp.107-133
• /
• 2001

This study aims to understand the Process of Communality formation among the Families of Communal Childcare Cooperative. Ethnographic, in-depth interview and participant observation at field are used as method. The families of communal childcare cooperative form their communality through investment and harmony, making relationship, and struggles and overcoming the struggles. Each family is willing to put in their money and time for an unfamiliar group to organize and manage a community. They head for the same direction accepting the diversity of expectation and thought based on the diversity of environment of each family. They have interactions upon the basis of equality among the families. Sharing their unique cloture such as communal place(teojeon), common issues, same generation, unique terms, specific modes of speaking informally or nicknaming, they accept the diversities and head for the sameness to have a harmony. In the reset of forming relationship, these families transfer successfully from the field of I and my family to that of group. They escape from a sense of priority that concerns their own family first and then others. They come to be able to consider the group first. Besides, they come to assimilate themselves to the group by identification with the group. They come to form their identity and sense of membership of the group recognizing power of group they belong in their families and local society. The process of forming community among the families of cooperative has inescapable struggles. Each family becomes a real host of the cooperative in the process of overcoming the struggles and experiences a growth of individual and group in the process of looking for the ways of overcoming the struggles. In the end, the families cooperates and reestablish their community.

• Computers and Concrete
• /
• v.14 no.1
• /
• pp.73-90
• /
• 2014

The traditional destructive tests in damage detection require high cost, long consuming time, repairing of damaged members, etc. In addition to these, powerful equipments with advanced technology have motivated development of global vibration based damage detection methods. These methods base on observation of the changes in the structural dynamic properties and updating finite element models. The existence, location, severity and effect on the structural behavior of the damages can be identified by using these methods. The main idea in these methods is to minimize the differences between analytical and experimental natural frequencies. In this study, an application of damage detection using model updating method was presented on a one storey reinforced concrete (RC) building model. The model was designed to be 1/2 scale of a real building. The measurements on the model were performed by using ten uni-axial seismic accelerometers which were placed to the floor level. The presented damage identification procedure mainly consists of five steps: initial finite element modeling, testing of the undamaged model, finite element model calibration, testing of the damaged model, and damage detection with model updating. The elasticity modulus was selected as variable parameter for model calibration, while the inertia moment of section was selected for model updating. The first three modes were taken into consideration. The possible damaged members were estimated by considering the change ratio in the inertia moment. It was concluded that the finite element model calibration was required for structures to later evaluations such as damage, fatigue, etc. The presented model updating based procedure was very effective and useful for RC structures in the damage identification.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.4
• /
• pp.1397-1401
• /
• 2015

Background: To determine the expressions of Tbx3, a member of subgroup belonging to T-box family, and its prognostic value in pancreatic carcinoma. Materials and Methods: We determined the expression levels of Tbx3 on both mRNA and protein levels in 30 pairs of fresh tumor tissues and paratumor tissues by quantitative real-time polymerase chain reaction (qRT-PCR) and Western blotting, respectively. In addition, protein level of Tbx3 were identified using immunochemistry in 80 pairs of paraffin-embedded specimen. The correlations between Tbx3 expression and various clinicopathological parameters as well as overall survival were evaluated. Results: Tbx3 mRNA and protein levels in tumor tissues were significantly higher than in the paratumor tissues by qRT-PCR ($0.05{\pm}0.007$ vs. $0.087{\pm}0.001$, p<0.001) and western blotting ($1.134{\pm}0.043$ vs. $0.287{\pm}0.017$, p<0.001). The statistical analysis based on immunohistochemical evaluation suggested that Tbx3 aberrant expression was significantly associated with several conventional clinicopathological variables, such as gender, age, tumor position, preoperative CA19-9 level, pathological T staging and N staging. Univariate and multivariate analyses revealed that Tbx3 expression was an independent prognostic factor for overall survival (<0.001). Conclusions: Our results suggest that overexpression of Tbx3 is associated with poor prognosis of pancreatic cancer patients. However, additional clinical trials are needed to accurately validate this observation.