• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.746-752
• /
• 2006

This paper presents a scheme for the parameter estimation and stabilization of unstable systems, such as inverted pendulum systems. First a stable feedback loop is constructed for an inverted pendulum system and then its parameters are estimated based on input-output data, a real-coded genetic algorithm(RCGA) and the model adjustment technique. Then, a PI-type LQ control scheme is designed based on the estimated model. The performance of the proposed algorithm is demonstrated through a set of simulation and experiment.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.23-27
• /
• 2008

본 논문에서는 실수코드 유전 알고리즘(RCGA)과 인공신경망(ANN)을 이용하여 항공기용 터보 축엔진의 결함 진단에 관한 연구를 수행하였다. 인공신경망만을 이용하여 엔진의 결함을 판단 할 경우 많은 학습데이터 때문에 지역 최소점으로 수렴하는 단점이 있다. 이를 개선하기 위해 전역 최소점을 찾는 능력이 뛰어난 실수코드 유전 알고리즘을 사용하였다. 5% 이내의 RMS 결함오차로 높은 결함 예측 신뢰도를 가짐을 확인하였다.

• 한국항공우주학회지
• /
• 제41권7호
• /
• pp.509-515
• /
• 2013

본 연구에서 익형 형상 설계를 위해 전역적 다목적 최적화 기법인 적응영역 다목적 유전자 알고리즘 코드를 개발하였다. 저마하수에서 최대 양력과 순항조건에서 최대 양항비를 동시에 만족시키기 위해 목적함수로 양력계수와 양항비를 선정하였으며, 익형 형상 설계를 위해 PARSEC 기법을 이용하였다. 그 결과 참조 익형 대비 나은 공력 특성을 나타내는 2개의 익형이 선택되었으며 최대 양력과 양항비는 첫 번째 익형에 대해 약 4.89%, 5.38% 증가하였으며, 두 번째 익형에 대해 약 7.13%, 4.33% 증가하였다.

• 제어로봇시스템학회논문지
• /
• 제10권9호
• /
• pp.833-839
• /
• 2004

This paper proposes a method that minimizes the consumed energy by searching the optimal locations of the mass centers of links composing of a biped robot using Real-Coded Genetic Algorithm. Generally, in order to utilize optimization algorithms, the system model and design variables must be defined. Firstly, the proposed model is a 6-DOF biped robot composed of seven links, since many of the essential characteristics of the human walking motion can be captured with a seven-link planar biped walking in the saggital plane. Next, Fourth order polynomials are used for basis functions to approximate the walking gait. The coefficients of the fourth order polynomials are defined as design variables. In order to use the method generating the optimal gait trajectory by searching the locations of mass centers of links, three variables are added to the total number of design variables. Real-Coded GA is used for optimization algorithm by reason of many advantages. Simulations and the comparison of three methods to generate gait trajectories including the GCIPM were performed. They show that the proposed method can decrease the consumed energy remarkably and be applied during the design phase of a robot actually.

• 제어로봇시스템학회논문지
• /
• 제11권1호
• /
• pp.34-40
• /
• 2005

In this paper, we describe the modeling for the 3D robot laser scanning system consisting of a laser stripe projector, camera, and 5-DOF robot and propose its calibration method. Nonlinear radial distortion in the camera model is considered for improving the calibration accuracy. The 3D range data is calculated using the optical triangulation principle which uses the geometrical relationship between the camera and the laser stripe plane. For optimal estimation of the system model parameters, real-coded genetic algorithm is applied in the calibration process. Experimental results show that the constructed system is able to measure the 3D position within about 1mm error. The proposed scheme could be applied to the kinematically dissimilar robot system without losing the generality and has a potential for recognition for the unknown environment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권6호
• /
• pp.753-759
• /
• 2006

Integrating processes are frequently encountered in process industries. In this paper, new tuning formulae of the PID controllers for set-point tracking and load disturbance rejection are presented for integrating processes involving time delay. First, the controller parameter sets are tuned using a real-coded genetic algorithm (RCGA) such that performance criterion(IAE, ISE or ITSE) is minimized. Then, tuning rules are addressed using tuned PID parameter sets. tuning model and another RCGA. The performances of the proposed rules are tested on two processes.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.107-108
• /
• 2006

This paper presents the design of a night vision system for vessels. Both a hardware system and software modules for stabilization control are developed. In order to stabilize each control axis, the two-degree of freedom(TDF) PID controller is designed and its parameters are tuned using a real-coded genetic algorithm(RCGA). Simulation demonstrates the effectiveness of the proposed system.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.268-273
• /
• 2005

The conventional PID controller has been widely used in many industrial control system because engineers can easily understand how to deal with three parameters of PID controller. The conventional tuning methods, however, have a tendency depend on experience and experiment. In this paper a real-coded genetic algorithm is used to search for the optimal parameters of PID controller for marine diesel engine. Simulation results compared with conventional PID controller tuning methods show the effectiveness and good performance of proposed scheme.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.721-728
• /
• 2009

PID control is widely used to control stable processes, however, PID control for unstable processes is less common. In this paper, systematic tuning methods are derived to tune the PID controller for unstable FOPTD(Forst Order Plus Time Delay) processes. The proposed PID controllers for set-point tracking and disturbance rejection problem are tuned based on minimizing the performance indexes (IAE, ISE, ITAE) using a real-coded genetic algorithm. Simulation example is given to illustrate the set-point tracking and disturbance rejection performance of the proposed method.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.67-72
• /
• 2012

In this paper a new method of handling linear constraints for the genetic algorithm is suggested. The method is designed to maintain the feasibility of offsprings during the evolution process of the genetic algorithm. In the genetic algorithm, the chromosomes are coded as the vectors in the real vector space constrained by the linear constraints. A method of handling the linear constraints already exists in which all the constraints of equalities are eliminated so that only the constraints of inequalities are considered in the process of the genetic algorithm. In this paper a new method is presented in which all the constraints of inequalities are eliminated so that only the constraints of equalities are considered. Several genetic operators such as arithmetic crossover, simplex crossover, simple crossover and random vector mutation are designed so that the resulting offspring vectors maintain the feasibility subject to the linear constraints in the framework of the new handling method.