• 한국염색가공학회지
• /
• 제16권1호
• /
• pp.26-33
• /
• 2004

Two reactive disperse dyes having $\alpha$-bromoacrylamide or acrylamide group were synthesized and their dyeing properties were compared with a disperse dye. Dyeing properties of reactive disperse dyes were strongly influenced by the chemical structure of reactive group. The amount of absorbed reactive disperse dye containing $\alpha$-bromoacrylamide group on polyester fiber was less than the disperse dye, and that on nylon fiber was much higher. When polyester and nylon fiber were simultaneously dyed in a dye pot, nylon fiber absorbed the reactive disperse dye more than polyester fiber. The reactive disperse dye having acrylamide group could reduces difference in color depth to a large extent, but the application of carrier or variation of dyebath pH were not sufficient for giving the same color depth to both fibers. The N/P union fabric could be dyed with the reactive disperse dye and its wash fastness were good to excellent.

• 한국염색가공학회지
• /
• 제25권4호
• /
• pp.262-270
• /
• 2013

Temporarily solubilized reactive disperse dyes containing ${\beta}$-sulfatoethylsulfonyl group were applied to 100% meta-aramid knitted fabric and their dyeing properties were investigated. Reactive disperse dyes showed relatively high K/S values on meta-aramid fabric when compared with conventional disperse dye or reactive dye, which showed very low K/S values. Color yields of reactive disperse dyes were highly dependent on dyeing pH and optimum results were obtained at pH 6. Percent exhaustion of reactive disperse dye on meta-aramid fabric was over 80% at 2% o.w.f of dye concentration. Wash fastness of pyridone-based reactive disperse dyes was very good to excellent while that of aminoazobenzene reactive disperse dyes was medium to good. Light fastness of all the reactive disperse dyes was very poor which seems to be due to the low photostability of meta-aramid fiber itself.

• Fibers and Polymers
• /
• 제7권2호
• /
• pp.174-179
• /
• 2006

Dyeing and color fastness properties of a reactive disperse dye containing an acetoxyethylsulphone group on PET, Nylon, silk and N/P fabrics were examined. The reactive disperse dye exhibited almost the same dyeing properties on PET fabric as a conventional disperse dye except the level of dye uptake. The most appropriate pH and dyeing temperature for the dyeing of Nylon fabric were 7 and $100^{\circ}C$ respectively. The build-up on Nylon fabric was good and various color fastnesses were good to excellent due to the formation of the covalent bond. Application of the reactive disperse dye on silk fabric at pH 9 and $80^{\circ}C$ yielded optimum color strength. The rate of dyeing on Nylon fabric was faster than that on PET fabric when both fabrics were dyed simultaneously in a dye bath, accordingly color strength of the dyed Nylon was higher. The reactive disperse dye can be applied for one-step and one-bath dyeing of N/P mixture fabric with good color fastness.

• 한국염색가공학회지
• /
• 제10권2호
• /
• pp.18-28
• /
• 1998

in order to overcome disadvantage of the conventional two bath dyeing method of polyester/cotton blends, it had prompted significant effort to the development of the one bath dyeing method which can accomplish sayings in time, energy and water usage. Also, when dyeing polyester/cotton blends by the one bath dyeing method, the high salt concentrations needed for the reactive dye can cause particles of disperse dye, used for the polyester component, to aggregate. A supplementary problem that can occasionally be happened is the change of hue that occurs on dyed polyester in an alkaline dyebath. To improve dyeing property of polyester/cotton blends, cotton component was pretreated with epichlolohydrine-trimethylamine hydrochloride in aqueous solution of sodium hydroxide to produce a cationized cotton that can be dyed under neutral conditions with reactive dye in a non-electrolytic or il little electrolytic dyebath. The one bath dyeing method of polyester/cationized cotton blends with disperse dye/reactive dye mixture resulted in a satisfactory dyeing property and color yield in comparison with ordinary two bath dyeing method.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.30-39
• /
• 1994

To study the printing behaviors of Polyester and cotton(P/C) fabrics printed with disperse and reactive dyes, the effects of alkalis on the fixation of reactive dyes and the alkali-stability of disperse dyes in various methods of fixation were examined. The anthraquinone disperse dyes which have diamino derivatives as substituents without hydroxy group, such as C.I. Disperse Violet 1(D.V.1), C.I. Disperse Violet 28(D.V.28) and C.I.Disperse Blue 60(D.B.60) showed good results of fixation without regard to the concentration of NaHCO$_3$. In case of high temperature steaming(HTS) and unsaturated steaming(US)/HTS, D.V. 1 was alkali-stable and effective for P/C printing. A good result was obtained with D.V.1 and C.I.Reactive Orange 13(R.O.13) paste of 4% $K_{2}CO_{3}$. It was found that the unfixed D.V.28 bearing chloro group can hinder the fixation of monochlorotriaxinyl reactive dyes, and D.B.60 made little stain on 100% cotton. In thermosol(Tm), the dye uptake of D.V.1 was not decreased so much, but those of D.V.28 and D.B.60 were greatly decreased.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2002년도 춘계학술발표회 논문집
• /
• pp.9-12
• /
• 2002

The Dyestuff is fixed to the fiber to color it in a unique way depending on the chemistry between them. Whenever there arose problems in coloring fibers, the chemistry of dyestuff could be adjusted to solve them. That manner new concept dye classes, e.g., reactive dyes, disperse dyes, cationic dyes, have arrived along with the introduction of new fibers. The attempt has made to introduce the new reactive dye to solve this problem.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.352-357
• /
• 2006

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino) benzenesulfonate (DBDCBS) at alkaline condition ofroom temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound, DBDCBS, has two reactive groups such as dichloro-striazinyl group and ${\alpha},\;{\beta}$-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.1-9
• /
• 2006

In order to dye polyester/cotton blend fabric by one-bath dyeing process with single disperse dye, a novel hetero-bifunctional bridge compound(DBDCBS) was synthesized and utilized. The DBDCBS was designed to contain two different reactive groups such as ${\alpha},{\beta}$-dibromopropionylamido and dichloro-s-triazinyl groups. The ${\alpha},{\beta}$-dibromopropionylamido group shows considerable reactivity towards amines or amino groups at acidic condition and high temperature. In contrast, the dichloro-s-triazinyl group has reactivity towards hydroxyl groups at alkaline condition and room temperature. In order to examine whether as a bridge the compound could combine dyes containing amino groups with cellulosic substrates, disperse dyes containing amino group were tried to dye the cotton fibers pretreated with the DBDCBS compound. By the results, polyester/cotton blends were dyed by one-bath dyeing process with single disperse dye,1,4-diaminoanthraquinone.

• 청정기술
• /
• 제10권1호
• /
• pp.37-45
• /
• 2004

본 연구는 섬유산업에서 많이 사용되고 있는 주요염료인 분산성, 반응성, 산성염료를 대상으로 일반적인 수질오염항목인 COD, T-N, TOC, color, SS, TDS, conductivity 등을 분석하여 각각의 염료용액의 성상을 비교 분석하였고, NF막을 투과시켰을 경우 투과 flux와 배제율이 염료용액 종류에 따라서 어떻게 다른 양상을 나타내는지를 연구하였다. 결과적으로, 염료종류별 화학적 성질 및 구조적인 차이에 의하여 염료용액의 용해도 및 유기물부하 등이 달라짐을 알 수 있었고, 특히, 분산성 염료와 반응성염료는 이들 화학적 성질의 차이가 매우 현격하게 달라서 투과 flux 감소현상과 유기물, color, 부유물 및 용존 고형물, 이온성 물질 등의 배제율이 다른 양상을 보임을 알 수 있었다. 반응성염료 용액은 분산성염료 용액에 비하여 투과 flux는 높지만, TDS의 배제율이 낮은 반면, 분산성염료 용액은 부유성 고형물 농도가 높아 투과 flux가 낮고, 유기물질의 배제율이 낮은 특성을 나타낸다.

• 한국염색가공학회지
• /
• 제19권1호
• /
• pp.1-11
• /
• 2007

Dyeing of polyester/cotton blends is usually carried out through the two-bath or one-bath two-step dyeing method using proper disperse dyes and reactive dyes for each fiber. However, the dyeing requires relatively long and complicated procedure as well as there are some problems such as lower dyeability. In the present study, new one-bath one-step dyeing process was investigated using disperse dyes having amino groups and hetero-bifunctional bridge compound(DBDCBS) including dichloro-s-triazinyl groups and ${\alpha},{\beta}$-dibromopropionylamido groups to improve the dyeability of cotton component in polyester/cotton blends. And the one-bath dyeing properties of polyester/cotton blends was evaluated by various dyeing conditions such as pH, temperature and dye concentration, The optimum dyeing condition was pH 4 and $110-120^{\circ}C$. Color fastness were relatively good because of the colvalent bond formation between DBDCBS-reacted cotton fiber and disperse dye.