• Bulletin of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.384-392
• /
• 2005

Solvent effects on the kinetics of bromophenol blue fading have been investigated within a temperature range in binary mixtures of methanol, ethanol, 1-propanol, ethylene glycol and 1,2-propanediol with water of varying solvent compositions up to 40% by weight of organic solvent component. Correlation of logk with reciprocal of the dielectric constant was linear. Finally a mechanism was proposed for the bromophenol blue fading upon SESMORTAC (study of effect of solvent mixture on the one-step reaction rates using the transition state theory and cage effect) model, by means of this model, the fundamental rate constants of the fading reaction in these solvent systems were calculated.

• Journal of Environmental Health Sciences
• /
• v.28 no.2
• /
• pp.141-148
• /
• 2002

This study was performed to examine the effects of rice straw as bulking materials on temperature, pH, weight and volume reduction, porosity, C/N ratio, salinity, and conductivity in aerobic composting of food wastes. Volume ratios of food wastes to rice straw in reactor control, RS-1, RS-2, RS-2 and RS-4 were 4:0, 4:1. 4:2. 4:3 and 4:4, respectively. Reactors were operated for 24days with 1 hour stirring by lrpm and 2hours aeration per day. The values of pH of food wastes and rice straw were 4.39 and 7.4, respectively. The lowering of the volume ratio of food wastes to rice straw resulted in the high reaction temperature and the fast weight and volume reduction rates. C/N ratio in control was larger than that in rice straw containing reactors. Salinity and conductivity in reactors were condensed and increased by reaction days.

• Korean Journal of Veterinary Research
• /
• v.30 no.4
• /
• pp.421-425
• /
• 1990

The present study was conducted to investigate the biochemical and cultural characteristics of Escherichia coli isolates from clinically affected chickens during the period from May 1988 to June 1989. A total of 82 E coli cultures were isolated from lesions of 75 chickens with colisepticemia. Biochemical properties of E coli isolates tested were in accordance with the general classification standard; all the isolates showed positive reaction in Catalase, Indol, and Methyl-Red tests, but negative reaction in Oxidase, Urease, $V{\ddot{o}ges$-Proskauer, Citrate utility, $H_2S$, Phenylalanine diaminase, and malonate tests. And the carbohydrate fermentation rates of them were shown to be variable. of the 82 isolates, 48(58.5%) cultures produced colicin to inhibit the indicator strain of E coli.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.322-325
• /
• 2003

The feasibility of treating 2-chlorophenol (2CP) contaminated soils with ozone venting was investigated in this research. Adding ozone to the existing air-venting process provides an alternative to achieve a complete in-situ treatment by oxidizing the contaminant in the process. A column study with artificial soil was used to simulate the venting process. Ozone concentrations at 2.4, 7.6 and 19.4 mg/L, and flow rates at 100 and 150 mL/min were used. The reaction times were 10, 20, 50, and 60 minutes. Blank samples using air venting were also run for comparison. It is obvious that ozone-venting had a much faster removal rate than air-venting. As higher concentration of ozone is applied, the reaction rate increased significantly. As higher concentration was applied, the flux of ozone to the liquid film increased. This also increased the removal rate of 2CP and therefore the breakthrough curve came out earlier.

• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.52-56
• /
• 2018

The present study examines the transformation of dynamic DSC data into the equivalent isothermal data for the formation kinetics of a polyurethane elastomer. The reaction of 2'-dichloro-4,4'-methylenedianiline (MOCA) with a PTMG/TDI-based isocyanate prepolymer was evaluated. DSC measurement was performed in the dynamic scanning mode with several different heating rates to obtain the reaction thermograms. Then, the data was transformed into the isothermal data through a procedure based on Ozawa analysis. The main feature of this procedure was the transformation of $({\alpha}-T)_{\beta}$ curves from dynamic DSC into $({\alpha}-t)_T$ curves using the isoconversional $(t-T)_{\alpha}$ diagram. Validity was discussed for the relationship between the dynamic DSC data and the transformed isothermal results.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.111-120
• /
• 2008

The combustion reaction of polypropylene was investigated using a thermogravimetric technique under an air atmosphere condition at several heating rates from 10 to $50^{\circ}C/min$. To obtain information on the kinetic parameters, the dynamic thermogravimetric analysis curve and its derivative were analyzed by a variety of analytical methods such as Kissinger, Friedman, Freeman-Carroll, Chatterjee-Conrad, Ozawa and Coats-Redfern methods. The comparative works for the kinetic results obtained from various methods should be performed to determine the kinetic parameters, because there are tremendous differences in the calculated kinetic parameters depending upon the mathematical method taken in the analysis.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.473-474
• /
• 2006

Boron Phosphide films were deposited on (111) Si substrate at $650^{\circ}C$, by the reaction of B2H6 with PH3 using APCVD. N2 was carried out as carrier gas. The optimal gas rates were $20\;m{\ell}/min$ for B2H6, $60\;m{\ell}/min$ for PH3 and $1\;{\ell}/min$ for N2. After as grown the films were insitu annealed for 1hour in N2 ambient at $550^{\circ}C$ and measured. The measurement of AFM shows that the RMS is $29.626{\AA}$ for the reaction temperature at $650^{\circ}C$. The measurement of XRD shows that the films have the orientation of (101). Also, the measurement of AES is shown that the films have B13P2 stoichiometry.

• Elastomers and Composites
• /
• v.28 no.4
• /
• pp.267-273
• /
• 1993

A number of hydrophilic acrylic comonomers were incorporated into styrene-butadiene soap-free emulsion polymerization. It was found that reaction rate decreased according to : AN>AA>MMA>EA>IA>AAM>MA>HEMA. It was also observed that reaction rate increased with decreasing H-bonding factor contribution to the solubility parameter of the hydrophilic comonoer. The SBR latexes were very monodisperse with the particle size distribution of $1.03{\times}1.12$. Since growth rate is proportional to polymerization time, the difference in conversion rates between various comonomers was resulted from the particle number density of SBR latexes for the various hydrophilic comonomers. It was also found that the colloidal stability of the latexes was excellent because no external emulsifier was incorporated.

• Journal of the Korean Ceramic Society
• /
• v.33 no.9
• /
• pp.985-994
• /
• 1996

The initiation and growth of $\alpha$-Al2O3/metal composites by the directed oxidation of molten commercial AlZnMg-alloy at 1223-1423K were investigated. Spontaneous bulk growth did not occur on the alloy alone. but the uniform initiation and growth of the composite were obtained by putting a thin layer of SiO2 particles on the surface of the alloy. Without SiO2 the external surface of the oxide layer was convered by MgO and MgAl2O4. But with the SiO2 reaction initiate the porous ZnO layers were found on the growth surface. The higher process temperature yielded a lower metal content. The oxidation product of $\alpha$-Al2O3 was found to be oriented with c-axis parallel to th growth direction. The growth rates increased with temperature and the apparent activation energy was 111.8 kJ/mol.

• Computers and Concrete
• /
• v.7 no.1
• /
• pp.17-38
• /
• 2010

This research aimed to investigate the influence of high-volume mineral admixtures (MAs), i.e., fly ash and slag, on the hydration characteristics and microstructures of cement pastes. Degree of cement hydration was quantified by the loss-on-ignition technique and degree of pozzolanic reaction was determined by a selective dissolution method. The influence of MAs on the pore structure of paste was measured by mercury intrusion porosimetry. The results showed that the hydration properties of the blended pastes were a function of water to binder ratio, cement replacement level by MAs, and curing age. Pastes containing fly ash exhibited strongly reduced early strength, especially for mix with 45% fly ash. Moreover, at a similar cement replacement level, slag incorporated cement paste showed higher degrees of cement hydration and pozzolanic reaction than that of fly ash incorporated cement paste. Thus, the present study demonstrates that high substitution rates of slag for cement result in better effects on the short- and long-term hydration properties of cement pastes.