• 자원리싸이클링
• /
• 제12권4호
• /
• pp.30-37
• /
• 2003

황산 용액에서 Zinc-ferrite의 용해에 대한 반응속도론을 황산 용액의 반응온도와 농도 변화에 대해 조사하였다. 반응율(R)과 겉보기 반응 속도상수(K)는 황산 용액의 온도와 농도가 클수록 증가한다. Zinc-ferrite의 반응속도는 반응초기에서 $1-(1-K)^{1/3}=Kt$와 같은 속도식을 적용할 수 있다. 용해에 대한 활성화 에너지는 황산 용액의 농도에 관계없이 약 16.3kcal/mole 이다. Zinc-ferrite가 황산 용액에서 용해할 때는 Zinc-ferrite의 화학 양론적 조성으로 용해되며, Fe 또는 Zn의 단독으로는 용해되지 않는다.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.7-18
• /
• 2000

Numerical simulations of counterflow non-premixed $CH_4/C_2HCl_3/Air$ flames added 8%(by volume) C2HCl3 on the fuel side are conducted at atmospheric pressure using a detailed chemical reaction mechanism in order to understand the effect of strain rates. A detailed sensitivity analysis is also performed in order to assess the relative influence of each reaction on the flame established at a strain rate of 200s-1. The structure of flames (i.e., temperature, velocity, and concentration of species) established at both a strain rate of 150s-1 and 300s-1 are investigated. As the strain rate increases, the "flame zone" is restricted to a narrower range and the position of maximum temperature is shifted to the fuel side. The concentrations of major species, H2O, CO, H2, HCl, Cl2, and Cl are decreased with increased strain rate. The reaction involving chlorine, CH4 + Cl $\rightarrow$ CH3 + HCl, instead of the reaction, CH4 + H $\rightarrow$ CH3 + H2 influences the consumption of methane. C2HCl3 + OH $\rightarrow$ CHCl2 + CHOCl and HCl + OH $\rightarrow$ H2O + Cl, are major reactions, through which OH radicals are consumed.

• Bulletin of the Korean Chemical Society
• /
• 제9권5호
• /
• pp.298-303
• /
• 1988

Kinetic studies on cupric ion ($Cu^{2+}$) oxidation of 1-benzyl- and 1-aryl-1,4-dihydronicotinamides (XNAH) in aqueous solution were performed. In the presence of dioxygen ($O_2$), the reaction followed first order kinetics with respect to both XNAH and $Cu^{2+}$. The oxidation reaction was found to be independent and parallel to the acid-catalyzed hydration reaction of XNAH. The catalytic role of $Cu^{2+}$ for the oxidation of XNAH in the presence of $O_2$ was attributed to $Cu^{2+}/Cu^+$ redox cycle by the reactions with XNAH and $O_2$. The second order rate constants of the Cu2+ oxidation reaction kCu, and acid-catalyzed hydration reaction $k_H$ were strongly dependent on the nature of the substituents in 1-aryl moiety. The slopes of log $k_{Cu}$ vs log $K_H$ and log $k_{Cu}$ vs ${\sigma}_p$ of the substituents plots were 1.64 and -2.2, respectively. This revealed the greater sensitivity of the oxidation reaction rate to the electron density on the ring nitrogen than the hydration reaction rate. A concerted two-electron transfer route involving XNAH-$Cu^{2+}$ complex was proposed for mechanism of the oxidation reaction.

• 대한수학회지
• /
• 제44권4호
• /
• pp.779-786
• /
• 2007

In this note, we consider a system of two reaction-diffusion equations with absorption, under homogeneous Dirichlet boundary. Using scaling methods, we establish the blow-up rate estimates.

• Elastomers and Composites
• /
• 제12권1호
• /
• pp.27-32
• /
• 1977

The kinetics of azo-coupling reaction of N-acetyl-H-acid (1-acetamino-8-hydroxynaphthalene-3, 6-disulfonic acid) with several heterocyclic diasonium compounds such as diazotiged 3-aminopyridine, 3-aminoquinoline, 8-aminoauinoline and aniline was studied. It was found that reactions proceeded at remarkably different rate. Reaction rate was in increasing order; 3-aminopyridine, 3-aminoquinoline, 8-aminoauinoline and aniline. And the activation energies were 9.62, 10.10, 10.39, 10.70 Kcal/mole, respectively. Especially, the rate constant of 3-aminopyridine was 100 times larger than that of benzene diasonium compound even in strong acidity. Hammett plot was also made of the rate constants obtained against the heterocyclic substituent constants reported in the literature. A good linear relationship was obtained and the reaction constant of N-acetyl H-acid was calculated to be 3.14.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.466-475
• /
• 2009

A numerical analysis of reactive flow in a liftoff flame is accomplished to elucidate the characteristics of flame propagation velocity and volume integral of reaction rate with the variation of fuel injection velocity at the fuel rich region, fuel lean region and diffusion flame region. The increase of fuel injection velocity enhances flame propagation velocity, but its effect on the flame propagation velocity is not much greater under 4%. The increase of fuel injection velocity affects directly and linearly on the flame surface area in the fuel rich region and so enhances volume integral of reaction rate to accommodate the increment of fuel.

• 한국표면공학회지
• /
• 제32권2호
• /
• pp.172-181
• /
• 1999

The effect of the DMAB concentration, temperature, deposition time, and stabilizer concentration on the precipitation reaction of the electroless nickel plating using dimethylamine borane (DMAB) as reducing agent was investigated to by the weight gain and electrochemical method. The deposition rate was dependent with DMAB concentration. The polarization resistance of the precipitation reaction was reduced with DMAB concentration. The precipitation reaction rate of Ni-B deposits was controlled by the oxidation rate of DMAB as the source of electron. The boron content of the deposit was constant at about 5.5wt%, even when DMAB concentration in the solution was increased. The effect of temperature and stabilizer ($Pb(NO_3)_2$) concentration on deposition rate was shown to have co-dependent behaviors.

• 방사성폐기물학회지
• /
• 제11권1호
• /
• pp.69-75
• /
• 2013

본 연구에서는 산화 공정이 Zircaloy-4 (Zry-4) 피복관의 염소화 반응 속도에 미치는 영향을 연구하기 위하여 Zry-4 피복관의 염소화 반응 실험을 수행하였다. 2시간 마다 반응 생성물을 회수하며 총 6 시간 동안 염소화 반응 실험을 수행하였고, 이를 통해 500도에서 10 시간 동안 산화된 Zry-4의 경우 초기 0-2 시간 구간에서 반응 속도가 현저히 저하되는 것을 확인하였다. 반응 잔류물은 fresh Zry-4와 산화된 Zry-4에서 각각 초기무게의 0.95, 1.65wt%로 확인되었다. 회수된 Zr의 순도는 두 경우 모두 99.61wt%로 동일하였다. 반응 속도의 정량적 분석을 위해 피복관의 반응 시간을 0.5, 1, 2, 4 시간인 경우에 대해 실험을 수행하였다. 실험 결과 분석을 통해 fresh Zry-4의 경우 전 영역에 걸쳐 23.35wt%/h의 단위 시간당 무게감소를 확인할 수 있었고, 산화된 Zry-4의 경우 반응 속도가 두 영역으로 나뉘는 것을 확인하였다. 산화된 Zry-4의 무게 감소 속도는 0-20wt% 영역에서는 17.12wt%/h, 20-100wt% 영역에서는 27.16wt%/h으로 나타났다.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.241-248
• /
• 1999

The photocatalytic decolorization and photodegradation of wastewater contamininated with dyes such as methyleneblue tetrahydrate(MBT), methyl orange(MO), phenol red(PR) and the mixed dyes have been studied using a batch reactor in the presence of aerotropic and titania. Degussa P25 titanium oxide was used as the photocatalyst and proved to be effective for the dyes-degradation when irradiated with UV-light source emitting the wavelength of 253.7 nm in the presence of air. In addition to removing the color from the wastewater, the photocatalytic reaction simultaneously reduced the COD and optical density which suggests that the dissolved organic compounds have been photooxidized. The reaction rate of disappearance of the dyes were measured as a function of the irradiation times. The photooxidative procedure of the aquatic solution have the first order reaction-kinetics. The rate constants were increased in the order of PR < MBT < $gL^{-1}-TiO_2$ powder were irradiated with the UV -light source.

• 한국물환경학회지
• /
• 제23권5호
• /
• pp.659-664
• /
• 2007

The objective of this study is to evaluate the detoxification method for the endocrine disrupting chemicals by manganese oxide. Manganese coated sand and bisphenol-A (BPA) was used as the reactive medium and the contaminant. Results showed that manganese oxide effectively degrades BPA by oxidative coupling reaction. The nonlinear oxidative coupling reaction orders were obtained for BPA and oxide, respectively. The reaction rate of BPA decreased as initial BPA concentration increased, as oxide loading decreased and as pH increased. The higher ionic strength, the higher reaction rate was observed. Divalent cations were adsorbed on the oxide surfaces, resulting in the decreased degradation rate of BPA.