• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.719-724
• /
• 2009

본 연구에서는 직물 탄소/에폭시와 유리/에폭시의 DCB(double cantilever beam)시편을 제작하여 ASTM 5528-01에 준하여 모우드 I 층간파괴인성을 측정하고, 이와 동일한 조건의 유한요소해석을 수행하여 층간파괴거동을 해석적으로 평가하였다. 시험에 의하여 측정된 층간파괴인성은 탄소/에폭시는 평균 $845.7J/m^2$, 유리/에폭시는 $1,042J/m^2$였다. 유한요소 모델은 접착요소를 이용하여 층간파괴를 구현하였고, 측정된 층간파괴인성을 부여하였다. 해석 결과의 검증을 위하여 시험을 통하여 측정된 시편 끝단의 반력과 Timoshenko 빔 이론을 통하여 계산된 결과를 비교하였다. 측정된 결과와 해석결과는 유사하였다.

• Journal of the Optical Society of Korea
• /
• 제9권1호
• /
• pp.16-21
• /
• 2005

Using a cantilever type nanoprobe having a 100㎚m aperture at the apex of the pyramidal tip of a near-field scanning optical microscope (NSOM), nanopatterning of polymer films are conducted. Two different types of polymer, namely a positive photoresist (DPR-i5500) and an azopolymer (Poly disperse orange-3), spincoated on a silicon wafer are used as the substrate. A He-Cd laser with a wavelength of 442㎚ is employed as the illumination source. The optical near-field produced at the tip of the nanoprobe induces a photochemical reaction on the irradiated region, leading to the fabrication of nanostructures below the diffraction limit of the laser light. By controlling the process parameters properly, nanopatterns as small as 100㎚ are produced on both the photoresist and azopolymer samples. The shape and size variations of the nanopatterns are examined with respect to the key process parameters such as laser beam power, irradiation time or scanning speed of the probe, operation modes of the NSOM (DC and AC modes), etc. The characteristic features during the fabrication of ordered structures such as dot or line arrays using NSOM lithography are investigated. Not only the direct writing of nano array structures on the polymer films but also the fabrication of NSOM-written patterns on the silicon substrate were investigated by introducing a passivation layer over the silicon surface. Possible application of thereby developed NSOM lithography technology to the fabrication of data storage is discussed.

• 청정기술
• /
• 제13권1호
• /
• pp.79-84
• /
• 2007

본 연구에서는 Ag가 포함된 sulfonated poly(ether ether ketone) (SPEEK)를 촉진 수송 분리막으로 사용하여 에틸렌/에탄 그리고 프로필렌/프로판의 분리연구를 수행하였다. SPEEK는 PEEK를 황산과 반응시켜 제조할 수 있는데, 제조 방법에 따라 다양한 설폰화도 (DS)을 나타내었고 약 70시간 반응시켰을 때 0.95의 DS값을 보여주었다. SPEEK의 농도를 변화시켜 제조된 막은 각각 다른 두께로 코팅됨을 SEM으로 확인하였다. SPEEK막에 Ag 염 수용액을 반응시켜 제조한 SPEEK-Ag 막을 이용하여 에틸렌/에탄 그리고 프로필렌/프로판의 분리 실험을 실시한 결과 에틸렌과 프로필렌은 SPEEK 코팅 두께에 따라 $200{\sim}500$의 선택도를 보여 주었고, 투과도는 $5{\sim}50$ GPU값을 보여 주었다. 또한 SPEEK-Ag 촉진 수송막은 막을 제조할 때 사용한 은염의 종류에 따라서도 각기 다른 분리 효율을 나타내었다.

• 한국균학회지
• /
• 제14권1호
• /
• pp.61-70
• /
• 1986

Sterigmatocystin bears a close structural relationship to aflatoxin $B_1$ and is a carcinogenic compound that has been shown to affect various species of experimental animals. Reaction and toxicity of sterigmatocystin in the artificial gastric juice were investigated. Sterigmatocystin was degraded in artificial gastric juice and extracted by the method of A.O.A.C. After cleaned up by silica gel column chromatography, this substance was detected and characterized by thin layer chromatography, UV, IR and mass spectra. It showed $R{\mathcal{f}}$ 0.4 and brick-red color by TLC. Especially, in the mass spectrum of it, fragment peak at m/e 327 was due to the loss of the $-CH_3$ and $-H_2O$, fragment peak at m/e 341 was due to the loss of the $H_2O$ and $-H^+$, and fragment peak at m/e 239 was due to the loss of the 2-chloro-tetrahydrofuran and methyl group from the parent molecule. Therefore, a degraded substance of sterigmatocystin reacted in artificial gastric juice (Sub. K) was estimated with additional formation of hydrochloric acid. In four-day-old chicken embryos, the mean lethal dose $(LD_{50})$ was $140\;{\mu}g/egg$, and 90 to 100% of the embryos were killed with 1 mg/egg. This $LD_{50}$ $140\;{\mu}g/egg$ compared with an $LD_{50}$ $14.69\;{\mu}g/egg$ for sterigmatocystin (acute toxicity) showed the substance to be much less toxic than sterigmatocystin.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.139-145
• /
• 2005

In the study, in order to deposit TaN thin film using diffusion barrier and bottom electrode we made the Plasma Assisted ALD equipment and confirmed the electrical characteristic of TaN thin films deposited PAALD method, PAALD equipment depositing TaN thin film using PEMAT(pentakis(ethylmethlyamlno) tantalum) Precursor and $NH_3$ reaction gas is aware that TaN thin film deposited of high density and amorphous phase with XRD measurement The degree of diffusion and react ion taking place in Cu/TaN(deposited using 150 W PAALD)/$SiO_2$/Si systems with increasing annealing temperature was estimated from MOS capacitor property and the $SiO_2(600\;\AA)$/Si system surface analysis by C-V measurement and secondary ion material spectrometer(SIMS) after Cu/TaN/$SiO_2(400\;\AA)$ system etching. TaN thin film deposited PAALD method diffusion barrier have a good diffusion barrier property up to $500^{\circ}C$.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.94-102
• /
• 2015

Electro-coagulation experiments were conducted with aluminum (Al) or iron (Fe) electrode in order to determine the optimal electrode material and operation conditions for algae removal. Al electrode showed higher removal rate of algae than Fe electrode because Al flocs have positive surface charges which electrostatically attract algae species having negative surface charges. Removal rate of algae and total phosphorous (T-P) was increased as current density and electrode area increases. It was also found that initial pH with neutral range was optimum for T-P removal by electro-coagulation. Bench-scale continuous flow experiments consisted of electro-coagulation reactor, agitation tank and settling tank were conducted. In electro-coagulation reactor, a large fraction of Al flocs were distributed to scum layer, due to the gas bubbles generated by electrolysis reaction. In agitation tank, most of Al flocs were settled and the optimal mixing intensity was found to be 50 rpm to achieve good settleability. The removal rate of algae was about 90-95%. Additionally, the removal rate of the T-P and COD was observed to be $73.8{\pm}8.0%$ and $75.0{\pm}3.8%$, respectively. Meanwhile, the removal rate of total nitrogen (T-N) was relatively low at only 24%.

• 보존과학회지
• /
• 제34권2호
• /
• pp.77-85
• /
• 2018

유물에 대한 조명의 변색 영향을 파악하기 위해서는 유물을 구성하는 재질에 대한 빛의 반응특성을 우선 분석하여야 한다. 본 연구에서는 회화유물의 채색층을 구성하는 대표적인 전색제인 동물성 아교와 린시드유를 대상으로 하였으며, 파장 특성이 다른 White LED와 Blue LED 조명을 사용한 가속열화실험을 통해 변색 영향 정도를 확인하였다. 실험 결과, 동물성 아교 및 린시드유는 Blue LED 조명을 사용한 가속열화실험 조건에서 변색이 두드러지게 나타났으며, 두 종류의 LED 조명 중에서 전복사속(mW) 값이 큰 Blue LED에서 재질 변색 정도가 크게 나타났다. 이상의 결과로, 동물성 아교 및 린시드유 등 회화유물 전색제의 변색에 미치는 광원의 영향은 전광선속(lm)보다 전복사속(mW)이 주요하게 작용함을 파악하였다.

• 한국응용과학기술학회지
• /
• 제12권1호
• /
• pp.125-131
• /
• 1995

Ultra thin films of Tetra-3-hexadecylsulphamoylcopperphthalocyanine(HDSM-CuPc) were formed on various substrates by Langmuir-Blodgett method, where HDSM-CuPc was synthesized by attaching long-chain alkylamine(hexa-decylamine) to CuPc. The reaction product was identified with FT-IR, UV-visible absorption spectroscopies, elemental analysis and thin layer chromatography. The formation of Ultrathin Langmuir-Blodgett(LB) films of HDSM-CuPc was confirmed by FT-IR and UV-visible spectroscopies. A quartz piezoelectric crystal coated with LB films of HDSM-CuPc was examined as a gas sensor for $N0_2$ gas. HDSM-CuPc LB films were transferred to a quartz crystal microbalance(QCM) in the form of Z-type multilayers. Response characteristics of film-coated QCM to $NO_2$ gas concentrations over a range of $100{\sim}600ppm$ have been tested with a thickness of $5{\sim}20$ layers of HDSM-CuPc. Changes in frequency by adsorption of $NO_2$ were increased With the number of LB layers and $NO_2$ concentration, but the response time was slow.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.156-156
• /
• 2016

The effect of nitrogen doping on the mechanical and tribological performance of single-layer tetrahedral amorphous carbon (ta-C:N) coatings of up to $1{\mu}m$ in thickness was investigated using a custom-made filtered cathode vacuum arc (FCVA). The results obtained revealed that the hardness of the coatings decreased from $65{\pm}4.8GPa$ to $25{\pm}2.4GPa$ with increasing nitrogen gas ratio, which indicates that nitrogen doping occurs through substitution in the $sp^2$ phase. Subsequent AES analysis showed that the N/C ratio in the ta-C:N thick-film coatings ranged from 0.03 to 0.29 and increased with the nitrogen flow rate. Variation in the G-peak positions and I(D)/I(G) ratio exhibit a similar trend. It is concluded from these results that micron-thick ta-C:N films have the potential to be used in a wide range of functional coating applications in electronics. To achieve highly conductive and wear-resistant coatings in system components, the friction and wear performances of the coating were investigated. The tribological behavior of the coating was investigated by sliding an SUJ2 ball over the coating in a ball-on-disk tribo-meter. The experimental results revealed that doping using a high nitrogen gas flow rate improved the wear resistance of the coating, while a low flow rate of 0-10 sccm increased the coefficient of friction (CoF) and wear rate through the generation of hematite (${\alpha}-Fe_2O_3$) phases by tribo-chemical reaction. However, the CoF and wear rate dramatically decreased when the nitrogen flow rate was increased to 30-40 sccm, due to the nitrogen inducing phase transformation that produced a graphite-like structure in the coating. The widths of the wear track and wear scar were also observed to decrease with increasing nitrogen flow rate. Moreover, the G-peaks of the wear scar around the SUJ2 ball on the worn surface increased with increasing nitrogen doping.

• 한국결정성장학회지
• /
• 제23권2호
• /
• pp.81-85
• /
• 2013

새로운 표면처리로서 TCF(thermal color fusion) 기술이 적용된 스와로브스키사의 패션 토파즈(passion topaz)의 코팅 층 성분과 적층구조를 파악하기 위해 ED-XRF와 TOF-SIMS 분석을 실시하였다. 더불어 감별특징 관찰을 위한 확대검사와 내구성 평가를 미스틱 토파즈(mystic topaz)와 비교 분석하였다. 그 결과, 패션 토파즈에서도 미스틱 토파즈에서 보이는 유사한 특징들이 확대검사를 통해 관찰되었고, TOF-SIMS에 의한 depth profile 분석 결과에서 토파즈 표면으로의 확산코팅과 다층구조 코팅이 되어있음을 알 수 있었다. 또한 패션 토파즈는 금속 원소간의 화학반응에 의한 코팅처리로 미스틱 토파즈 보다 화학약품에 대한 안정적인 특성과 높은 모스경도를 보였다.