• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.607-607
• /
• 2013

차세대 비휘발성 메모리 소자로서 각광받고 있는 저항 변화 메모리(resistive switching random access memory; ReRAM) 소자는 속도가 빠르고, 에너지 소모가 적으며, 고집적화를 이루기 용이하다는 강점을 보유하고 있다. 지금까지 저항변화 물질의 최적화를 위해 매우 다양한 물질들이 연구되고 있으며, 그 물질에 따라 스위칭 메커니즘 및 동작 방법이 다르게 보고되어 왔다. 하지만 저항변화 메모리의 스위칭 거동은 전형적인 전기적 제어 조건으로부터 구현되었기 때문에 한정된 소자 특성을 나타낼 수밖에 없었다. 본 연구에서는 새로운 메모리 제어 조건으로 빛을 이용함으로써 한정된 소자 특성으로부터 벗어나고자 하였다. 저항 변화 물질로 잘 알려진 ZnO를 표면적이 넓은 형태로 합성하기 위하여 hydrothermal 방법으로 FTO 기판 위에 수직하게 배열된 ZnO 나노와이어를 형성하고 그 위에 Au 상부 전극을 형성하여 금속-절연체-금속 소자 구조를 제작하였다. 본 연구에서는 전형적인 전기적 제어 조건에 더불어 빛의 입사 유무 조건을 바꿔가면서 Au/ZnO 나노와이어/FTO 소자의 저항 변화 특성을 평가 하였을 뿐만 아니라 전기적 인가 없이 오직 빛만으로 두 가지 안정한 저항 상태를 반복적으로 전환하는 특성을 유도하였다. 본 결과를 바탕으로 필라멘트 이론에 기초한 저항 변화 메커니즘을 설명하는 모델이 제시되었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.370-370
• /
• 2010

The effects of adding higher-valence impurities on the bipolar resistive switching characteristics of Pt/$NiO_{1+x}$/TiN MIM stacks and physical properties were investigated. $NiO_{1+x}$ films with 14% W deposited at 20% oxygen partial pressure exhibited the bipolar resistance switching characteristics in Pt/$NiO_{1+x}$/TiN MIM stacks, while $NiO_{1+x}$ films with 8.2% W show unipolar resistance switching behavior. The relationship of W-doping and the crystallinity was studied by X-ray diffraction. The metallic Ni contents and $WO_x$ binding states with W amount was investigated by XPS. Our result showed that the metallic Ni, $WO_x$ binding states, and crystallinity in $NiO_{1+x}$ played an important role on the bipolar resistive switching.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.288-288
• /
• 2012

In this study, we investigated that the resistance switching characteristics of W-doped NbOx films with increasing W doping concentration. The W-doped NbOx based ReRAM devices with a TiN/W-doped NbOx/Pt/Ti/SiO2 were fabricated on Si substrates. The 50 nm thick W-doped NbOx films were deposited by reactive dc magnetron co-sputtering at $400^{\circ}C$ and oxygen partial pressure of 35%. Micro-structure of W-doped NbOx films and atomic concentration were investigated by XRD, TEM and XPS, respectively. The W-doped NbOx films showed set/reset resistance switching behavior at various W doping concentrations. The process voltage of set/reset is decreased and whereas the initial current level is increased with increasing W doping concentration in NbOx films. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of metallic tungsten of oxygen of W-doped NbOx.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.113-113
• /
• 2005

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.80-84
• /
• 2008

We systematically investigated the resistive switching properties of thin $TiO_2$ films on Pt/Ti/$SiO_2$/Si substrates that were embedded with a Co ultra thin layer. An in-situ sputtering technique was used to grow both films without breaking the chamber vacuum. A stable bipolar switching in the current-voltage curve was clearly observed in $TiO_2$ films with an embedded Co ultra thin layer, addressing the high and low resistive state under a bias voltage sweep. We propose that the underlying origin involved in the bipolar switching may be attributed to the interface redox reaction between the Co and $TiO_2$ layers. The improved reproducible switching properties of our novel structures under forward and reverse bias stresses demonstrated the possibility of future non-volatile memory elements in a simple capacitive-like structure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.378.1-378.1
• /
• 2014

In this study, we investigated that the resistance switching characteristics of Nb-doped HfO2 films with increasing Nb doping concentration. The Nb-doped HfO2 based ReRAM devices with a TiN/Nb-doped HfO2/Pt/Ti/SiO2 were fabricated on Si substrates. The Nb-doped HfO2 films were deposited by reactive dc magnetron co-sputtering at $300^{\circ}C$ and oxygen partial ratio of 60% (Ar: 16sccm, O2: 24sccm). Microstructure of Nb-doped HfO2 films and atomic concentration were investigated by XRD, TEM, and XPS, respectively. The Nb-doped HfO2 films showed set/reset resistance switching behavior at various Nb doping concentrations. The process voltage of forming/set is decreased and whereas the initial current level is increased in doped HfO2 films. However, the switching properties of Nb-doped HfO2 were changed above the specific doping concentration of Nb. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of non-lattice oxygen and micro-structure of Nb-doped HfO2.

• Applied Microscopy
• /
• v.42 no.4
• /
• pp.207-211
• /
• 2012

We examined the electrical properties and microstructure of NiO produced using a sol-gel method and Ni nitrate hexahydrate ($Ni[NO_3]_2{\cdot}6H_2O$) to investigate if this NiO thin film can be used as an insulator layer for resistance random access memory (ReRAM) devices. It was found that as-prepared NiO film was polycrystalline and presented as the nonstoichiometric compound $Ni_{1+x}O$ with Ni interstitials (oxygen vacancies). Resistances-witching behavior was observed in the range of 0~2 V, and the low-resistance state and high-resistance state were clearly distinguishable (${\sim}10^3$ orders). It was also demonstrated that NiO could be patterned directly by KrF eximer laser irradiation using a shadow mask. NiO thin film fabricated by the sol-gel method does not require any photoresist or vacuum processes, and therefore has potential for application as an insulating layer in low-cost ReRAM devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.307-307
• /
• 2012

In this study, we investigated that the resistance switching characteristics of Al-doped MgOx films with increasing Al doping concentration and increasing film thickness. The Al-doped MgOx based ReRAM devices with a TiN/Al-doped MgOx/Pt/Ti/SiO2 were fabricated on Si substrates. The 5 nm, 10 nm, and 15 nm thick Al-doped MgOx films were deposited by reactive dc magnetron co-sputtering at $300^{\circ}C$ and oxygen partial ratio of 60% (Ar: 16 sccm, O2: 24 sccm). Micro-structure of Al-doped MgOx films and atomic concentration were investigated by XRD and XPS, respectively. The Al-doped MgOx films showed set/reset resistance switching behavior at various Al doping concentrations. The process voltage of forming/set is decreased and whereas the initial current level is increased with decreasing thickness of Al-doped MgOx films. Besides, the initial current of Al-doped MgOx films is increased with increasing Al doping concentration in MgOx films. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of non-lattice oxygen of Al-doped MgOx.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.1
• /
• pp.24-27
• /
• 2014

In this study, the effects of Mn-doping and the electrode materials on the memory characteristics of $ZnO_xS_{1-x}$ resistive random access memory (ReRAM) devices on plastic are investigated. Compared with the undoped Al/$ZnO_xS_{1-x}$/Au and Al/$ZnO_xS_{1-x}$/Cu devices, the Mn-doped ones show a relatively higher ratio of the high resistance state (HRS) to low resistance state (LRS), and narrower resistance distributions in both states. For the $ZnO_xS_{1-x}$ devices with bottom electrodes of Cu, more stable conducting filament paths are formed near these electrodes, due to the relatively higher affinity of copper to sulfur, compared with the devices with bottom electrodes of Au, so that the distributions of the set and reset voltages get narrower. For the Al/$ZnO_xS_{1-x}$/Cu device, the ratio of the HRS to LRS is above $10^6$, and the memory characteristics are maintained for $10^4$ sec, which values are comparable to those of ReRAM devices on Si or glass substrates.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.379-379
• /
• 2011

차세대 저항메모리(resistive switching random access memory; ReRAM)의 개발을 위해 다양한 산화 물질들의 저항 변화 특성이 연구되고 있다. 본 연구에서는 저항 변화 물질로 잘 알려진 ZnO 박막을 이용하여 저항 변화 특성을 평가하였다. ZnO 박막은 Pt/Ti/$SiO_2$/Si 기판 위에 스퍼터링 시스템을 이용하여 약 50 nm 두께로 증착되었다. 증착된 박막 위에 전극을 evaporator를 이용하여 패턴닝함으로써 전극-반도체-전극 구조의 소자를 만들고 이의 전기적 특성을 평가하였다. Compliance current를 설정하여 저항 변화 특성을 측정한 결과 가해진 전압의 극성에 관계 없이 저항이 변화하는, dielectric breakdown에 의해 박막내 전도성 필라멘트라 불리는 전도성 길이 생성되었다가 joule-heating에 의해 필라멘트가 파열되는, 전형적인 unipolar 저항 변화특성이 나타났다. 다기능성 소자 개발을 위해 위 소자 구조를 투명한 고분자 기판위에 형성하고 표면에 초발수성 ZnO 나노막대 구조를 합성하였다. 그 결과 투명하면서 유연하고, 수분에도 안정적인 다기능성 저항 변화 소자 특성을 평가할 수 있었다. 본 결과를 바탕으로 필라멘트 이론에 기초한 저항 변화 메커니즘을 설명하는 모델이 제시되었다.