• International Journal of Precision Engineering and Manufacturing
• /
• 제1권1호
• /
• pp.84-90
• /
• 2000

The importance of Virtual Manufacturing System is increasing in the area of developing new manufacturing processes, implementing automated workcells, designing plant facility layouts and workplace ergonomics. Virtual manufacturing system is a computer system that can generate the same information about manufacturing system structure, states, and behaviors as is observed in a real manufacturing. In this research, a virtual manufacturing system for flexible manufacturing cells (VFMC), (which is a useful tool for building Computer Integrated Manufacturing (CIM), has been developed using object-oriented paradigm, and implemented with software QUEST/IGRIP. Three object models used in the system are the product model, the facility model, and the process model. The concrete behaviors of a flexible manufacturing cell are re[presented by the task-oriented description diagram, TIC. An example simulation is executed to evaluate applicability of the developed models, and to prove the potential value of virtual manufacturing paradigm.

• 한국농공학회지
• /
• 제39권4호
• /
• pp.82-89
• /
• 1997

A physically-based soil-water erosion model with simple hydrology and Rose & Hairsine's erosion concept is described, and was implemented in the form of computer program. The model derived from the concept of stream power(Bagnold, 1977) considers settling velocity characteristics of the soil and distinguishes between the processes of entrainment and re-entrainment. It deals separately with rill flow and sheet flow, handles vegetation in terms of soil contact cover, and has the ability to simulate soil movement on nonuniform slopes. The model predicted sediment concentrations reasonably with the results of Mclsaac et al. (1990). It showed a capability to quantitatively predict the movement of soil on uniform and nonuniform slopes. Among the model parameters, soil depositability $({\phi})$ was the most sensitive from the sensitivity analysis.

• Nutrition Research and Practice
• /
• 제1권1호
• /
• pp.3-7
• /
• 2007

This paper overviews the historical background and development of applied nutrition and community nutrition in Korea. The nutrition studies in the early years focused on animal experiments, human metabolism, and food analysis and therefore were limited to classrooms and research laboratories in universities without spreading into the lives of people. Korean specialists trained through the UN International Course of Applied Nutrition initiated the Applied Nutrition Program (ANP) in Korea in the 1960s. The ANP in Korea was effectively implemented until 1986 with support from UNICEF, FAO, and WHO as a national project to improve the nutrition and health of rural residents. With economic development and urbanization in Korea, the rural-focusing ANP was re-born to a more extended version with the name of "Community Nutrition", targeting the nutrition and health of the entire Korean population. Scholarly associations including the Korean Society of Community Nutrition established in 1995 have significantly contributed to the development of Community Nutrition in Korea and are expected to continue to work for a better connection between nutrition and health promotion.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.7-13
• /
• 2014

As issues on light pollution is being raised recently, movements to prevent light pollution is being implemented by each local government, such as by enforcing the Light Pollution Act from February 2013, in order to require compliance with the light-emitting permission level of existing lighting facilities. However, despite the regulations, no specific measures on products are being prepared. Thus, this Research has designed a light shield as a measure to minimize the burden of the effectiveness and time required for development and the burden of the cost necessary to re-install existing light facilities in its entirety and reviewed the effect of the measure through the BUG ratings.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.906-909
• /
• 2005

In this study, the dynamic flying characteristics of the worn head sliders are investigated theoretically due to the change in head geometry caused by head and disk contact. The film shapes can be approximated as taper- truncated cycloidal-flat film. Two-dimensional time dependent modified Reynolds equation included molecular slip effect are formulated with neglected the roughness effect. The motion of head slider was assumed to have two degree of freedom in this work. Finite difference approximation with Newton Raphson iterative technique and the fourth order Runge-Kutta method were implemented to obtain the transient response of the slider head with various change in head geometry numerically and compared with the transient response of the IBM3380 type head slider. The simulation results show the film shape has affects significantly on the static and dynamic characteristic of slider head in magnetic storage systems.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.209-216
• /
• 1996

This paper deals with the speed control of the switched reluctnace motor using fuzzy PI controller. A fuzzy logic control provides a good approach to nonlinear system because it does not require a detailed mathematical model to formulate the algorithm. The fuzzy PI controller is implemented by MCS80C196KB, a 16 bit one-chip microcontroller, and an EPROM is used for the commutation logic of the SRM. The simulation and experimental results show that the performance of the fuzzy PI controller is superior to that of the conventional PI controller in terms of response time, settling time and overshoot. In particular, the robustness of the system is largely improved.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1221-1224
• /
• 2003

A 64-point R2$^2$ SDF pipeline FFT processor using a new efficient computation sharing multiplier was designed. Computation sharing multiplication specifically targets computation re-use in multiplication of coefficient vector by scalar and is effectively used in DSP(Digital Signal Processing). To reduce the number of multipliers in FFT, we used the proposed computation sharing multiplier. The 64-point pipeline FFT processor was implemented by VHDL and synthesized using Max+PLUSII of Altera. The simulation result shows that the proposed computation sharing multiplier can be reduced to about 17.8% logic cells compared with a conventional multiplier. This processor can operate at 33MHz and calculate a 64-point pipeline FFT in 1.94 $mutextrm{s}$.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2004년도 The 3rd Annual Conference for The Korean Society for Bioinformatics Association of Asian Societies for Bioinformatics 2004 Symposium
• /
• pp.13-20
• /
• 2004

Grid system has the potential to resolve the current need of bioinformatics for super-computing environment inexpensively. There are already several Grid applications of bioinformatics tools. To solve the real-world bioinformatics problems, however, the various integration of each tool is necessary in addition to the implementation of more basic tools. Workflow based problem solving environment can be the efficient solution for this type of software development. There are still heavy overhead, however, to develop and implement workflow model on current Grid system. He re we propose a model of simple problem solving environment that enables component based workflow design of integrated bioinformatics applications on Grid environment by using Condor functionalities. We realized this model for practical bioinformatics solutions of a genome sequence analysis and a comparative genome analysis. We implemented necessary bioinformatics tools and interfacing tools as the components, and combine them in the workflow model of each solution by using the tools presented in Condor.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.397-403
• /
• 2010

The Immersed boundary method(IBM) is one of CFD techniques which can simulate flow field around complex objectives using simple Cartesian grid system. In the previous studies the IBM has mostly been implemented to fractional step method based Navier-Stokes solvers. In these cases, pressure buildup near IB was found to occur when linear interpolation and stadard mass conservation is used and the interpolation scheme became complicated when higher order of interpolation is adopted. In this study, we implement the IBM to an incompressible Navier-Stokes solver which uses SIMPLE algorithm. Bi-linear and quadratic interpolation equations were formulated by using only geometric information of boundary to reconstruct velocities near IB. Flow around 2D circular cylinder at Re=40 and 100 was solved by using these formulations. It was found that the pressure buildup was not observed even when the bi-linear interpolation was adopted. The use of quadratic interpolation made the predicted aerodynamic forces in good agreement with those of previous studies.

• 제어로봇시스템학회논문지
• /
• 제4권6호
• /
• pp.738-746
• /
• 1998

This paper presents a neural network-based adaptive controller for a single flexible-link. The control for feedback-error loaming of neural network is designed by using the re-definition approach. The neural network controllers are implemented on an single flexible-link experimental test-bed. The tip response is significantly improved and the vibrations of the flexible modes are damped very fast. Experimental and simulation results are presented of the proposed tip position tracking controllers over the conventional PD-type, passive controllers.