• Journal of Electrical Engineering and information Science
• /
• 제2권5호
• /
• pp.9-16
• /
• 1997

This paper describes the design of a multistandard video encoder. The proposed encoder accepts conventional NTSC/PAL video signals, It also processes he PAL-plus video signal which is now popular in Europe. The encoder consists of five major building functions which are letter-box converter, color space converter, digital filters, color modulator and timing generator. In order to support multistandard video signals, a programmable systolic architecture is adopted in designing various digital filters. Interpolation digital filters are also used to enhance signal-to-noise ratio of encoded video signals. The input to the encoder can be either YCbCr signal or RGB signal. The outputs re luminance(Y), chrominance(C), and composite video baseband(Y+C) signals. The architecture of the encoder is defined by using Matlab program and is modelled by using Veriflog-HDL language. The overall operation is verified by using various video signals, such as color bar patterns, ramp signals, and so on. The encoder contains 42K gates and is implemented by using 0.6um CMOS process.

• Parasites, Hosts and Diseases
• /
• 제38권3호
• /
• pp.119-138
• /
• 2000

Korean vivax malaria had been prevalent for longtime throughout the country with low endemicity. As a result of the Korean war (1950-1953), malaria became epidemic. In 1959-1969 when the National Malaria Eradication Service (NMES) was implemented, malaria rates declined, with low endemicity in the south-west and south plain areas and high endemic foci in north Kyongsangbuk-do (province) and north and east Kyonggi-do. NMES activities greatly contributed in accelerating the control and later eradication of malaria. The Republic of Korea (South Korea) was designated malaria free in 1979. However, malaria re-emerged in 1993 and an outbreak occurred in north Kyonggi-do and north-west Kangwon-do (in and/or near the Demilitarized Zone, DMZ) , bordering North Korea. It has been postulated that most of the malaria cases resulted from bites of sporozoite-infected females of An. sinensis dispersed from North Korea across the DMZ. Judging from epidemiological and socio-ecological factors, vivax malaria would not be possible to be endemic in South Korea. Historical data show that vivax malaria in Korea is a typical unstable malaria. Epidemics may occur when environmental, socio-economical, and/or political factors change in favor to malaria transmission, and when such factors change to normal conditions malaria rates become low and may disappear. Passive case detection is a most feasible and recommendable control measure against the unstable vivax malaria in Korea in cost-effect point of view.

• 한국산학기술학회논문지
• /
• 제10권3호
• /
• pp.507-514
• /
• 2009

본 연구에서는 재순환 유동 현상을 포함하는 후향 계단에서 난류 유동장에 대한 LES의 예측성능을 검토하였다. LES의 난류모델로서 Localized Dynamic ksgs-equation 모델이 적용되었으며, 계산시간의 절감을 위하여 16개의 프로세서를 이용한 병렬계산이 수행되었다 후향 계단의 층류 유동에 대한 직접수치모사(DNS)의 수행 결과, 본 계산 결과는 기존의 실험 및 수치결과를 매우 잘 예측하였다. 또한 중간 및 높은 Re 수에 해당되는 난류 영역의 LES 결과는 평균 재순환 유동특성을 비교적 잘 예측하였다. 위 결과를 통해 본 연구에서 개발된 LES 프로그램은 향후 실용 연소기에서 연소 불안정성 및 연소 소음 등의 해석에 유용할 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제53권10호
• /
• pp.3182-3195
• /
• 2021

The implementation and validation of multi-dimensional (multi-D) features in thermal-hydraulic system codes aims to extend the application of these codes towards multi-scale simulations. The main goal is the simulation of large-scale three-dimensional effects inside large volumes such as piping or vessel. This novel approach becomes especially relevant during the simulation of accidents with strongly asymmetric flow conditions entailing density gradients. Under such conditions, coolant mixing is a key phenomenon on the eventual variation of the coolant temperature and/or boron concentration at the core inlet and on the extent of a local re-criticality based on the reactivity feedback effects. This approach presents several advantages compared to CFD calculations, mainly concerning the model size and computational efforts. However, the range of applicability and accuracy of the newly implemented physical models at this point is still limited and needs to be further extended. This paper aims at contributing to the validation of the multi-D features of the system code ATHLET based on the simulation of the Tests 1.1 and 2.1, conducted at the test facility ROCOM. Overall, the multi-D features of ATHLET predict reasonably well the evolution from both experiments, despite an observed overprediction of coolant mixing at the vessel during both experiments.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.9-27
• /
• 2021

As an example of research activities in decontamination for decommissioning, new data are presented on the options for corrosion layer dissolution during the decommissioning decontamination, or persulfate regeneration for decontamination solutions re-use. For the management of spent decontamination solutions, new method based on solvent extraction of radionuclides into ionic liquid followed by electrodeposition of the radionuclides has been developed. Fields of applications of composite inorganic-organic absorbers or solid extractants with polyacrylonitrile (PAN) binding matrix for the treatment of liquid radioactive waste are reviewed; a method for americium separation from the boric acid containing NPP evaporator concentrates based on the TODGA-PAN material is discussed in more detail. Performance of a model of radionuclide transport, developed and implemented within the GoldSim programming environment, for the safety studies of the LLW/ILW repository is demonstrated on the specific case of the Richard repository (Czech Republic). Continuation and even broadening of these activities are expected in connection with the approaching end of the lifespan of the first blocks of the Czech NPPs.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권1호
• /
• pp.841-850
• /
• 2021

This study aims to evaluate the relationship between bank capital, efficiency, and risk in Islamic banks. We use data from 129 Islamic banks in the world, retrieved from various data sources. We retrieved specific banking data from Moody's Analytics BankFocus and Thomson Reuters Eikon, while data at the country level was obtained from the World Bank website. This study uses various estimates both Pooled OLS (Ordinary Least Square) and Random Effect (RE). However, to overcome the issue of serial correlation which could cause bias in the results of the study, we used fixed-effect (FE) cluster estimates. The research results confirm the previous findings that bank capital positively affects bank stability (natural logarithm of Z-Score) and negatively affects credit risk (loan loss provision to total liabilities). The findings also show that efficiency has the same effect. The interaction test of bank capital and efficiency shows that efficiency encourages banks to reduce risk, including when bank capital is relatively lower. This finding is expected to have implications for the authorities to boost bank efficiency in addition to establishing several regulations related to capital. The efficiency implemented by the bank will encourage banks to act prudently so that the bank can maintain its performance through risk mitigation.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.1-6
• /
• 2013

Concrete construction requires utilization of many temporary facilities such as formwork, shoring, and scaffolding. Appropriate use of these temporary facilities greatly impacts the quality, cost, schedule, and safety of concrete construction. The current practice in design and planning of temporary facilities is often manual, error-prone, and re-active based on construction site layout, status, and progress in the field. Early design and planning of temporary facilities for concrete construction using Building Information Modeling (BIM) technology offers a potential solution. Although some commercially-available software exists that assists in the generation of temporary facility designs, the construction industry lacks tools that support detailed planning and design of many other temporary facilities. This research presents our early work in automating the design and planning of temporary facilities utilizing BIM. Algorithms were developed to automatically assess geometric conditions of work space to detect required temporary facilities and design them. The proposed methodology was implemented in a test model. By automatically incorporating temporary facilities into BIM, more realistic construction models can be created with less effort and errors. Temporary facilities-loaded models can finally be used for communication, bill of materials, scheduling, etc. and as a benchmark for field installation of temporary formwork, shoring, and scaffolding systems.

• Educational Technology International
• /
• 제9권2호
• /
• pp.97-121
• /
• 2008

The purposes of the present study are to describe the design of mobile learning scenarios based on learning sciences theories, and to discuss implications for the future research in this area. To move beyond mere speculations about the abundant possibilities of mobile learning and to make real impact in K-12 school settings, it is critical to conduct school-based research grounded on the learning sciences theories. Towards this end, this paper describes school-based mobile learning projects conducted by a research team at the Learning Sciences Lab in Singapore, and then discusses the possibilities and challenges of mobile learning to further inform future research. Specifically, this paper explores the affordances of mobile technology, such as portability, connectivity and context-sensitivity, to design seamless learning scenarios that bridge formal and informal learning experiences. The authors present a framework for re-conceptualizing different types of learning based on physical settings and intentionality, and then describe two seamless learning scenarios, namely 3Rs and Chinatown Trail, which were implemented in one primary school in Singapore. In conclusion, the authors discuss the affordances of seamless mobile learning for enhancing one's lived experiences to build a living ecological relationship between the person and the environment, and how mobile technology can play a critical role for enabling such lived experiences.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.296-304
• /
• 2023

Cavitation tests for a waterjet propulsor of an amphibious vehicle are carried out in the Large Cavitation Tunnel. Waterjet pump performances and cavitation characteristics including thrust breakdown performances are investigated in the tests. In addition, cavitation characteristics for waterjet propulsors working inside the intake are calculated by using a commercial CFD code, Star-CCM+. Sliding mesh is implemented to a rotating impeller and the k-epsilon turbulence model is chosen. Cavitation bubble growth and collapse are estimated using the Schnerr-Sauer cavitation model based on Rayleigh-Plasset equation. Calculated results agree fairly well with experimental results. The re-design of the waterjet propulsor is performed to enhance waterjet cavitating performances and calculated results show that waterjet thrust breakdown characteristics are significantly improved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권11호
• /
• pp.3064-3082
• /
• 2023

During the last decade, several Electronic Orientation Aids devices have been proposed to solve the autonomy problems of visually impaired people. When hearing is considered the primary sense for Visually Impaired people (VI) and it is generally loaded with the environment, the use of tactile sense can be considered a solution to transmit directional information. This paper presents a new wearable haptic system based on four motors implemented in shoes, while six directions can be played. This study aims to introduce an interface design and investigate an appropriate means of spatial information delivery through haptic sense. The first experiment of the proposed system was performed with 15 users in an indoor environment. The results showed that the users were able to recognize, with high accuracy, the directions displayed on their feet. The second experiment was conducted in an outdoor environment with five blindfolded users who were guided along 120 meters. The users, guided only by the haptic system, successfully reached their destinations. The potential of tactile-foot stimulation to help VI understand Electronic Orientation Aids (EOA) instructions was discussed, and future challenges were defined.