• 한국토양비료학회지
• /
• 제48권3호
• /
• pp.194-204
• /
• 2015

Six study sites in Gumi, Goryeong in Gyeongbuk province and Naju in Jeonnam province were selected to investigate soil properties of poorly drained horizons in paddy soils. The horizons were re-established layers which were parent material layers originated from fluvial deposits. Topsoil layers were differentiated from piled parent materials while soil structure of the topsoil layer was massive with striated microstructure. Compaction at soil re-establishment and a lack of structure and aggregate development in these soils may cause the limitation of vertical water movement and result in poorly drained horizons. Soil samples were taken from paddy fields with top soils of sandy loam, silt loam and silty clay loam and re-established soils of coarse and fine texture. The samples were taken from each horizon for the analyses of soil chemical and mineral properties. Soils with re-established soils of coarse texture had greater amounts of sands from top soil texture distributions, while soils with fine texture had greater amounts of silts. Chemical properties of top soils were analyzed from rice cultivated soils at the time of re-establishments and one year after the re-establishments. The coarse texture of the re-established horizons decreased in EC values from 0.23 to $0.11(dS\;m^{-1})$, available phosphate values from 112 to $54(mg\;kg^{-1})$, and exchangeable Ca values from 6.6 to $4.9(cmol_c\;kg^{-1})$. On the other hand, soils with fine texture showed decrease only in pH and exchangeable Ca values. Especially, organic matter and available phosphate contents showed heterogeneous distributions from each horizon. This result may be caused by mixture of plough layer and subsurface layer during and consolidation. Hydraulic conductivity values were low at the boundaries of top soil and parent material layers except SL/coarse soil. Soil microstructure was massive structure without soil clods or pores and showed striated structure. Therefore, re-established paddy fields with fluvial deposits as parent material layers showed limited vertical movements of soil water because of occurrence of compacted layers and less-development of soil clods and aggregates.

• 한국분말재료학회지
• /
• 제16권1호
• /
• pp.16-21
• /
• 2009

Nanostructured $ReSi_{1.75}$ was synthesized to have high density via rapid and cost effective process named as high-frequency induction heated combustion synthesis(HFIHCS) method. For the process, mechanically activated Re-Si powder was used, which had been prepared by mechanical ball milling of Re and Si powders with mixing ratio of 1:1.75. Both combustion synthesis and densification were accomplished simultaneously by applying electric current and mechanical pressure of 80 MPa during the process. The average grain size, hardness, and fracture toughness of the compound were 210 nm, 1085 $kg/mm^2$ and 4 $MPa{\cdot}m^{1/2}$, respectively. The experimental results show that HFIHCS is a promising process for synthesis of nanostructured $ReSi_{1.75}$ which has a potential for both high temperature and thermo-electric applications.

• Journal of Crop Science and Biotechnology
• /
• 제11권3호
• /
• pp.193-198
• /
• 2008

To develop a natural re-seeding technology, the optimum soil incorporation time of Chinese milk vetch(CMV) plant residues, seed persistence in soil, biomass production and subsequent rice yield were determined from 2005 to 2007 in rice with CMV green manure in southern Korea. Generally, insufficient seedling stand was regenerated with CMV incorporation to the soil at 20 and 25 days after flowering(DAF), while high regeneration of greater than 400 seedlings per $m^2$ was observed at 35 and 40 DAF. High re-seeding stand of CMV incorporated at 35 DAF or later was related with high seed viability and heavy seed weight. Appreciable number of CMV seeds remained 4 month after burial in soil and a good number of CMV seedlings regenerated from this seed bank at rice harvest time in the fall. Based on the relationships among re-seeding number of CMV plants, seed weight and seed viability, CMV plants should be incorporated into the soil 35 DAF(May 30) or later when CMV seeds were sufficiently matured. The natural re-seeding stand for the 3-year trials was stable ranging from 437 to 700 plants per $m^2$ and the biomass production was sufficient to supply nitrogen for rice growth. The use of re-seeding CMV plant can produce similar rice yield like that of rice without CMV green manure.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권4호
• /
• pp.145-151
• /
• 2005

The synthetic breaking test method was developed to evaluate the breaking performance of ultra high-voltage circuit breaker and made up of two independent circuits; current source circuit and voltage source circuit. In application of this test method, it is necessary to extend the arc of the test breaker. So, the new re-ignition system using VTGS (Vacuum Triggered Gap-Switch) was constructed to improve the efficiency and reliability of this test. In this re-ignition system, VTGS operates in high vacuum state of $5{\time}10^{17}$torr and control system consists of the triggering device and the air M-G (Motor-Generator). This re-ignition system showed the operating characteristics, such as delay time ($t_d$) and jitter time ($t_j$ not exceeding 5us and 1us respectively, and had the operating voltage of $25\~150kVdc$ at the gap distance of 24mm.

• 대한방사성의약품학회지
• /
• 제5권1호
• /
• pp.3-10
• /
• 2019

The activities per volume of $^{188}Re$ and $^{99m}Tc$ from their generators are dependent on the specific activity of their mother nuclides $^{188}W$ and $^{99}Mo$ respectively. After a particular lapse of time, the eluted RI activity is exponentially reduced and thus cannot satisfy the needs of clinical application. The purpose of this study is to develop a $^{188}Re$ and $^{99m}Tc$ concentration device with a compact size that can extend the period of use as well as conveniently concentrate the RI. We designed the concentration module by including two-different check valves that do not required any manual on-off operations. In these concentration process, cation exchange resin embedded with Ag and anion exchange resins were used. After completing the concentrating step, the recovering yield was identified to be more than 93% for $^{188}Re$ generators and 88% for $^{99m}Tc$ generators. Moreover, all these procedures were done within 5 min.

• 신재생에너지
• /
• 제20권2호
• /
• pp.44-54
• /
• 2024

The objective of this study was to contribute to domestic offshore wind farms by reasonably predicting the expected completion time and installed power generation capacity of offshore wind projects in South Korea. Offshore wind power is drastically regarded as a core tool for clean energy transition and industrial decarbonization in the fight against the climate crisis globally. Especially in South Korea offshore wind power is the main tool in partaking in RE100 and K-RE100, and the Korean government aims to install 14.9 GW of offshore wind farms by 2030. However, this seems to have been significantly delayed due to the complex process of obtaining permits for offshore wind power in Korea. Thus, a reasonable prediction of power generation and a timeline for the final construction are imperative. To establish the delay time for permit licenses, classified location factors were included into site analysis. These factors comprised reviews of transmission and military operability, environmental impact assessment, maritime traffic safety examination, wind resource assessment and an analysis of current offshore wind projects. According to the analysis, the majority of offshore wind projects currently being developed in Korea are predicted to be delayed by 3-5 years as they are among the criteria included in key discussion points for obtaining permits. The cumulative installed power capacity and annual power generation after construction are expected to be 37 GW and 97 TWh respectively.

• 대한수학회보
• /
• 제56권4호
• /
• pp.939-959
• /
• 2019

Using generalized graded crossed products, we give necessary and sufficient conditions for a simple algebra over a Henselian valued field (under some hypotheses) to have Kummer subfields. This study generalizes some known works. We also study many properties of generalized graded crossed products and conditions for embedding a graded simple algebra into a matrix algebra of a graded division ring.

• 한국산림과학회지
• /
• 제97권5호
• /
• pp.547-551
• /
• 2008

The study aimed to develop a cryopreservation method for long-term storage using mature somatic embryo of Japanese larch. In this study, desiccation treatments significantly affected re-induction rates of embryogenic tissue (ET) from dried somatic embryos. In the effect of different dehydration temperature and duration on the re-initiation ET. the highest frequency was shown when somatic embryos were dehydrated at $25^{\circ}C$ for 2 (45.5%) or 1 day (43.3%), respectively. In addition, low temperatures [$4^{\circ}C$, 2 days (44.2%) or 3 days (43.5%)] were marked higher ET initiation. After that, the initiation value was declined with dehydration duration. For comparison of different relative humidity on re-induction frequency of ET, the best re-induction (43.5%) was obtained from somatic embryos pre-dried at $(NH_4)_2SO_4$ (RH 79%). Both $Na_2HPO_4$ (RH 97%) and $Na_2CO_3$ (RH 88%) treatments were showed the similar rate, 34.6, 34.2%, respectively. However the lowest rate (19.6%) was observed in distilled water (RH 100%). In comparison of the various storage temperatures and duration of the dried somatic embryos, the highest frequency (66.9%) of re-initiation was obtained when somatic embryos were cryopreserved for one day. However, the frequency was gradually decreased as the time length of storage increased regardless of types of storage. None of ET re-initiated when stored at $4^{\circ}C$ for 1, 2 and 84 days.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.80-87
• /
• 2024

This paper focuses on improving accuracy in constrained computing settings by employing the ReLU (Rectified Linear Unit) activation function. The research conducted involves modifying parameters of the ReLU function and comparing performance in terms of accuracy and computational time. This paper specifically focuses on optimizing ReLU in the context of a Multilayer Perceptron (MLP) by determining the ideal values for features such as the dimensions of the linear layers and the learning rate (Ir). In order to optimize performance, the paper experiments with adjusting parameters like the size dimensions of linear layers and Ir values to induce the best performance outcomes. The experimental results show that using ReLU alone yielded the highest accuracy of 96.7% when the dimension sizes were 30 - 10 and the Ir value was 1. When combining ReLU with the Adam optimizer, the optimal model configuration had dimension sizes of 60 - 40 - 10, and an Ir value of 0.001, which resulted in the highest accuracy of 97.07%.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.456-463
• /
• 2003

This paper presents a texture mapping method of a 3D scanned model with 2D images from different views. The texture mapping process consists of two steps Registration of the 3D facet model to the images by interactive points matching, and 3D texture mapping of the image pieces to the corresponding facets. In this paper. some implem entation issues and illustrative examples are described.