• Journal of Fashion Business
• /
• v.23 no.1
• /
• pp.64-73
• /
• 2019

The objective of this study was to investigate dyeing characteristics of silk, cotton and rayon fabrics using dyeing solution extracted from different varieties of tea. Comparative results of CIE Lab values of 360 pieces of dyed fabrics were studied to quantify the effects of dye concentrations (100%, 150%, and 200%) and mordants (Fe, Cu, Sn, Al). In addition, the color difference values (${\Delta}E$) of the dyed and mordanted fabrics were evaluated. The results of the study were as follows: First, among all of the 360 pieces of silk, cotton and rayon fabrics, the best dyeing effects was observed on silk fabrics. Second, the dyeing effect of the eight different types of tealeaves belonging to green tea, oolong tea, black tea, and dark tea tended to enhance as the degree of fermentation increased. Third, when the fabrics were mordanted with Fe, Cu, Sn, Al mordants, various colors such as brown, brownish red, brownish yellow, gray, and reddish brown were obtained.

• Ocean and Polar Research
• /
• v.45 no.1
• /
• pp.1-9
• /
• 2023

Marine microalgae have different collection methods depending on their habitat. In the case of adhesive microalgae, it is difficult to separate organisms from the substrate surface, and contamination is likely to occur during the sampling process. In this study, we analyzed the collection efficiency of adhesive microalgae using three artificial fiber materials (nylon, blend fabric, and viscose rayon). Each fiber showed different fiber diameter and pore characteristics (nylon 26.09 ㎛, blend fabric 56.6 ㎛, viscose rayon 101.3 ㎛). In addition, attached organisms were collected on the surface of artificial substrates at Bukseong Port in Incheon using each tested fiber material. After that, we investigated the population and species composition. The highest number of cells was found in nylon, which was 8 times higher than in the least collected viscose rayon material. In addition, we identified 24 microalgal species from the substrate, demonstrating that the species composition differed from that of surface water. The number of collected microalgae species varied depending on the fiber materials, with nylon containing all the adhesive microalgae. In contrast, only a few microalgae were observed in other fibers. These results suggest that, of the tested fibers, nylon material may be suitable for collecting adhesive microalgae. As a result, this study may be useful for future research on adhesive microalgae.

• Composites Research
• /
• v.20 no.4
• /
• pp.18-24
• /
• 2007

The mechanical and thermal properties of PAN-based/rayon-based carbon fabrics interply hybrid composite materials have been studied. Mechanical properties including tensile and interlaminar shear strengths were improved with increasing amount of continuous PAN-based carbon fabrics. The erosion rate and insulation index were determined through the torch test. Continuous rayon-based carbon fabrics composite indicated relatively low ablation resistant property. The thermal conductivity of hybrid composite of spun PAN-based/continuous rayon-based carbon fabrics is lower than that of the continuous PAN-based carbon fabrics composite.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.296-301
• /
• 2007

Carbon nanofibers (CNFs) are non-microporous materials with a high surface area ($100{\sim}200m^2/g$) and high purity. Therefore, the material has a high potential for use as catalyst support. Activated carbon fibers (ACFs) are of increasing concern with regard to the levels of toxic air pollutants emitted from high-technology industry. Rayon-based CNFs and ACFs was subjected to thermal oxidation under a wide variety of temperature and air conditions to modify the surface properties. Rayon-based CNFs and ACFs were prepared by using thermal chemistry. CNFs were synthesized at temperatures above $600^{\circ}C$ in an air atmosphere and grew with increased temperature and air conditions. After heating at $800^{\circ}C$ for 72 hr, carbonized rayon with ACFs had $2,662m^2/g$ (BET) of surface area and $1.41cm^3/g$ of pore volume. The resulting ACFs had a 99% surface area in which pore size was 10 nm or less, and a 60 % surface area in which pore size was 2 nm or less.

• The tire
• /
• s.31
• /
• pp.11-15
• /
• 1971

이 글은 1970년 10월호 Rubber world 지에서 발행 번역한 것임

• The Science & Technology
• /
• v.7 no.10 s.65
• /
• pp.51-55
• /
• 1974

• Proceedings of the Membrane Society of Korea Conference
• /
• 2000.07b
• /
• pp.15-41
• /
• 2000

• Fiber Technology and Industry
• /
• v.6 no.1_2
• /
• pp.17-28
• /
• 2002

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.113-120
• /
• 1994

The Purpose of this study was to improve the moisture related properties of viscose rayon fibers. Viscose rayon filament yarns were partially etherified to make CMC fibers. CMC fibers were converted to the sodium, calcium, and ferric salt forms by an ion exchange method. The property changes of ion exchanged CMC fibers were examined. Cation contents of fibers were varied depending on the degree of substitution of CMC fibers. The strength of Na, Ca, Fe-CMC was higher than H-CMC owing to the plasticization by moisture sorption and the crosslinking by cations. The moisture regain was increased by carboxymethylation and that of Fe-CMC showed the highest value. The degree of swelling determined by the water retention value was observed to be Na-CMC > Ca-CMC > H-CMC > Fe-CMC. The solution retention value was decreased in the order . Ca-CMC > Na-CMC > H-CMC > Fe-CMC.

• Textile Coloration and Finishing
• /
• v.10 no.6
• /
• pp.20-26
• /
• 1998

100％ viscose rayon fabric was treated with 1,2,3,4-butanetetracarboxylic acid (BTCA) by pad-dry-cure process in the presence of various catalysts. The dimensional stability, mechanical properties and hand values of fabric treated with BTCA were investigated. The ester-crosslinking reaction was influenced by the concentration of BTCA and type of catalyst. The fabric treated with BTCA was comparable or superior to that treated with conventional crosslinking agents such as dimethyloldihydroxyethyleneurea and 4,5-dihydroxy-1,3-dimethyl-2-imidazolidinone in respect of wrinkle recovery, shrinkproof property, retention of strength, and hand values. But in yellowing of fabric, the fabric treated with BTCA was inferior to that treated with conventional crosslinking agents. The fabric treated with BTCA/sodium formate was inferior to that treated with BTCA/sodium hypophosphite in respect of WRA, but had better strength retention and whiteness.