• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1037-1044
• /
• 2020

Since radar wind profiler (RWP) provides wind field data with high time and space resolution in all weather conditions, their verification of the accuracy and quality is essential. The simultaneous wind measurement from rawinsonde is commonly used to evaluate wind vectors from RWP. In this study, the simulation algorithm which produces the spectrum and raw time series (I/Q) data from the average values of moments is presented as a step-by-step verification method for the signal processing algorithm. The possibility of the simulation algorithm was also confirmed through comparison with the raw data of LAP-3000. The Doppler power spectrum was generated by assuming the density function of the skew-normal distribution and by using the moment values as the parameter. The simulated spectrum was generated through random numbers. In addition, the coherent averaged I/Q data was generated by random phase and inverse discrete Fourier transform, and raw I/Q data was generated through the Dirichlet distribution.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.9
• /
• pp.166-173
• /
• 2000

A system for burr measurement is developed to measure the geometry of the burr formed in metal cutting or shearing operations. laser system is selected according to the required measuring accuracy and burr size. A specific program for calculating the burr geometry from measured laser data is developed. The raw data is obtained by scanning cross the burr. The height and width of burr are calculated. Due to the specific characteristic of laser peak or valley are formed in measuring sharp edges or small sharp cracks. Compensation for the peak or valley is carried out to make it possible to calculate the burr, burr geometry is measured in 3 dimension.

• Journal of Distribution Science
• /
• v.10 no.11
• /
• pp.11-20
• /
• 2012

Purpose - This study attempts to measure the management performance of a food manufacturer using the BSC as one of the main business management techniques used to achieve the vision of a corporation. Research design, data, methodology - The measurement of business performance of a Japanese food manufacturer was conducted from four perspectives of BSC. Matsui (2005) developed the 'Cross-analysis chart'. Results - First, there were many cases where a minor wastage of raw materials was related to increasing costs. Second, the food manufacturer should try to recover the investment cost through significantly increasing the rate of the facility's operations. Third, reducing personnel expenses could be an important issue in labor-intensive manufacturing. Fourth, customer management was very important in the food manufacturing business. Finally, the food manufacturer should actively consider proposals influencing the food culture to secure high profits in the future. Conclusions - There were many limitations in applying these results to Korean food manufacturers, as this study applied to and analyzed the results in the context of the Japanese food manufacturer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.91-96
• /
• 2006

Presently, cycle-slip detection is done between adjacent two points in many cycle-slip methods. Inherently, it is simple wavelet analysis. A new idea is put forward that the number of difference point can adjust by a parameter factor; we study this method to smooth raw data and detect cycle-slip with wavelet analysis. Taking CHAMP satellite data for example, we get some significant conclusions. It is showed that it is valid to detect cycle-slip in GPS phase measurement based on this wavelet function, and it is helpful to improve the precision of GPS data pre-processing and positioning.

• Atmosphere
• /
• v.28 no.2
• /
• pp.113-121
• /
• 2018

In order to monitor greenhouse gases including $CO_2$, various types of surface-, aircraft-, and satellite-based measurement projects have been conducted. These data help understand the variations of greenhouse gases and are used in atmospheric inverse modeling systems to simulate surface fluxes for greenhouse gases. CarbonTracker is a system for estimating surface $CO_2$ flux, using an atmospheric inverse modeling method, based on only surface observation data. Because of the insufficient surface observation data available for accurate estimation of the surface $CO_2$ flux, additional observations would be required. In this study, a system that assimilates aircraft $CO_2$ measurement data in CarbonTracker (CT2013B) is developed, and the estimated results from this data assimilation system are evaluated. The aircraft $CO_2$ measurement data used are obtained from the Comprehensive Observation Network for Trace gases by the Airliner (CONTRAIL) project. The developed system includes the preprocessor of the raw observation data, the observation operator, and the ensemble Kalman filter (EnKF) data assimilation process. After preprocessing the raw data, the modeled value corresponding spatially and temporally to each observation is calculated using the observation operator. These modeled values and observations are then averaged in space and time, and used in the EnKF data assimilation process. The modeled values are much closer to the observations and show smaller biases and root-mean-square errors, after the assimilation of the aircraft $CO_2$ measurement data. This system could also be used to assimilate other aircraft $CO_2$ measurement data in CarbonTracker.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.25-30
• /
• 2020

In this study, an SW for the analysis of the wind-turbine vibration characteristics was developed as an application of SaaS cloud infrastructure. A measurement system for power-performance, mechanical load, and gearbox vibration as type-test class was installed at a target MW-class wind turbine, and structural meta and raw data were then acquired into the cloud. Data processing algorithms were developed to provide cloud data to the SW. To operate the SW continuously, raw data was downloaded consistently based on the algorithms. During the SW test, an intermittent long time-delay occurred due to the communication load associated with frequent access to the cloud. To solve this, a compression service for the target raw data was developed in the cloud and more stable data processing was confirmed. Using the compression service, stable big data processing of wind turbines, including gearbox vibration analysis, is expected.

• Journal of Conservation Science
• /
• v.16 s.16
• /
• pp.15-20
• /
• 2004

Two pieces of choson-Tongue(朝鮮通寶) minted at 1423 A.D. were analyzed by atomic absorption spectroscopy and neutron activation analysis. The measurement of lead isotope ratios was also carried out in order to predict the provenance of raw materials used for minting. The Chosen-Tongue was minted as bronze having the chemical compositions of $Cu\;90\%,\;Pb\;3\~4\%,\;Sn\;2\~3\%$, which were different from the typical composition of Chinese and Japanese coins. The results of lead isotope ratios showed that the provenance of raw materials used for minting had a possibility to be originated from South China. And application of statistical linear discriminant analysis (SLDA) to the provenance of lead used for minting of Chosen-Tongue was confirmed.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.90-90
• /
• 2018

Kochiae Fructus is a medicinal plant used as medicine of the urinary organs, skin disease and inflammation. In this study, anti-inflammatory activity of Kochiae Fructus extract and its possible mechanisms of action were examined. The anti-inflammatory activity was investigated by inhibition of lipopolysaccharide (LPS) induced nitric oxide (NO), pro-inflammatory cytokine production and matrix metalloprotease-9 (MMP-9) in murine macrophage-like cell line Raw 264.7 cells. The measurement of the induced pro-inflammatory cytokine levels were carried out by ELISA. The phosphorylation of ERK1/2, JNK and MAPK and the nuclear expression of nuclear factor $NF-{\kappa}B$ p65 were investigated by Wesern blot analysis. The extract suppressed the phosphorylation of ERK1/2, JNK, and p38 MAPK, and the nuclear translocation of $NF-{\kappa}B$ p65 in activated cells. As a result, we suggest that the extract of Kochiae Fructus decreased the production of pro-inflammatory cytokines ($TNF-{\alpha}$, IL-6), nitric oxide, MMP-9 in LPS-induced Raw264.7 cells. Kochiae Fructus has possibility to be used as therapeutic benefits against inflammatory diseases.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.5
• /
• pp.511-517
• /
• 2016

Anthropometric data of the hand is one of the important issues for the product design related with hand and manual operation in terms of user-centered design. Direct measurement, which traditionally uses anthropometric measuring tool, has a few disadvantages in cumulation of measuring time, possible errors in raw data, doubtful reliability between inspectors. Newly introduced 3D scanning technology overcomes those disadvantages; however, another disadvantages, such as, hight cost and immovability, have been introduced. In this study, photogrammetric approach was introduced for the measurement of anthropometric data in hand. In order to minimize the possibility of error during direct and indirect measurement, a simulated object was used and effectiveness of photogrametric measurement was confirmed for the collection of anthropometric data in hand.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.5
• /
• pp.31-37
• /
• 2017

In this Paper, we have Improved the Manufacturing Process of Liquid Aluminum Sulfate using the Design of Automated Measurement Systems. The Manufacturing Process of Liquid Aluminum Sulfate uses a Large Weight. The Quality of a Product Depends Highly on the Proportion of the Raw Material Input in the Production Process. Therefore, it is Very Important to Accurately Measure the Amount of Raw Material. For Automation Design, Load Cell Sensor which can Measure Large Weight Accurately and PLC Technology which is most used in Automation Process are Applied. The Content of Aluminum Oxide in the Aluminum Sulfate Produced before the Automation Design Varies from 8.023% to 8.250%. However, after Automation Design, the Amount of Change from 8.09% to 8.19% was Greatly Reduced. As a Result, we could Reduce the Quality Defect rate Due to Weighing Errors and Reduce Safety Accidents by Applying Automation System.