• Food Science of Animal Resources
• /
• v.35 no.5
• /
• pp.674-682
• /
• 2015

The objective of this study was to evaluate the risk of illness from Campylobacter spp. on ham. To identify the hazards of Campylobacter spp. on ham, the general characteristics and microbial criteria for Campylobacter spp., and campylobacteriosis outbreaks were investigated. In the exposure assessment, the prevalence of Campylobacter spp. on ham was evaluated, and the probabilistic distributions for the temperature of ham surfaces in retail markets and home refrigerators were prepared. In addition, the raw data from the Korea National Health and Nutrition Examination Survey (KNHNES) 2012 were used to estimate the consumption amount and frequency of ham. In the hazard characterization, the Beta-Poisson model for Campylobacter spp. infection was used. For risk characterization, a simulation model was developed using the collected data, and the risk of Campylobacter spp. on ham was estimated with @RISK. The Campylobacter spp. cell counts on ham samples were below the detection limit (<0.70 Log CFU/g). The daily consumption of ham was 23.93 g per person, and the consumption frequency was 11.57%. The simulated mean value of the initial contamination level of Campylobacter spp. on ham was −3.95 Log CFU/g, and the mean value of ham for probable risk per person per day was 2.20×10⁻¹². It is considered that the risk of foodborne illness for Campylobacter spp. was low. Furthermore, these results indicate that the microbial risk assessment of Campylobacter spp. in this study should be useful in providing scientific evidence to set up the criteria of Campylobacter spp..

• Geomechanics and Engineering
• /
• v.10 no.5
• /
• pp.677-687
• /
• 2016

Industrialization and urbanization are the two phenomena that are going relentless all over the world. The consequence of this economic success has been a massive increase in waste on one hand and increasing demand for suitable sites for construction on the other. Owing to the surplus raw materials and energy requirement needed for manufacturing synthetic fibers, applications of waste fibers for reinforcing soils evidenced to offer economic and environmental benefits. The main objective of the proposed work is to explore the possibilities of improving the strength of soil using fly ash waste as an admixture and Human Hair Fiber (HHF) as reinforcement such that they can be used for construction of embankments and land reclamation projects. The effect of fiber content on soil - fly ash mixture was observed through a series of laboratory tests such as compaction tests, CBR and unconfined compression tests. From the stress - strain curves, it was observed that the UCC strength for the optimised soil - flyash mixture reinforced with 0.75% human hair fibers is nearly 2.85 times higher than that of the untreated soil. Further, it has been noticed that there is about 7.73 times increase in CBR for the reinforced soil compared to untreated soil. This drastic increase in strength may be due to the fact that HHF offer more pull-out resistance which makes the fibers act like a bridge to prevent further cracking and thereby it improves the toughness which in turn prevent the brittle failure of soil-flyash specimen. Hence, the test results reveal that the inclusion of randomly distributed HHF in soil significantly improves the engineering properties of soil and can be effectively utilized in pavements. SEM analysis explained the change of microstructures and the formation of hydration products that offered increase in strength and it was found to be in accordance with strength tests.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.6
• /
• pp.937-941
• /
• 2003

Red mustard leaf (RML) kimchi was prepared with native Brassica juncea czerniak et coss as a major raw material and antioxidative characteristics of crude anthocyanin (CA)/refined anthocyanin (RA) isolated from RML kimchi were studied. Among crude pigment fractions, CA fraction showed a higher inhibition rate of peroxide formation in linoleic acid autoxidation system. These effects seemed to be increased with the increase of CA concentration. CA also was considered to have a role of electron donor by the experiments using DPPH ($\alpha$, $\alpha$＇-diphenyl-$\beta$-picrylhydrazyl) reaction. Furthermore, various RA fractions had a higher antioxidative activity and especially RA-fraction 3 demonstrated the highest score of the antioxidative characteristics in terms of the prevention of lipid peroxidation and scavenging of free radicals.

• Journal of Environmental Impact Assessment
• /
• v.20 no.3
• /
• pp.313-324
• /
• 2011

The purpose of this study is to present the raw data for establishing the plan of top soil conservation in soil environment and preventing the soil loss by establishing the potential amount of soil loss using RUSLE. The results are as follows. To apply the RUSLE model, we calculated the potential amount of soil loss by using 5 factors; rainfall erosion factor(R), topographical factor(LS), soil erosion factor(K), land cover factor(C) and erosion control factor(P). The assessment map of soil loss was drawn up by classifying 5 grades. According to the soil loss estimation by the RUSLE, it showed that approximately 83.9% of the study area had relatively lower possibility of soil loss which was the 1 ton/ha in annual soil loss. Whereas, the 7.0% of the study area was defined as high risk area which was the 10 ton/ha in annual. Therefore, this area was needed that there was environment-friendly construction of farm land, improvement of cultivation environment and so forth. In future, if we will analyze the amount of soil loss of Gyeongju national park and Hyeongsan river watershed, we will offer the help to establishing the conservation plan of soil environment in Gyeongsangbuk-do.

• Korean Journal of Pharmacognosy
• /
• v.36 no.3 s.142
• /
• pp.245-251
• /
• 2005

Phytochemical examination of the barks of Actinidia arguta led to the isolation of five flavonoids. Structures of compounds were elucidated as catechin (1), (-)-epicatechin (2), quercetin (3), $quercetin-3-O-{\beta}-D-glucopyranoside$ (4), $quercetin-3-O-{\beta}-D-galactopyranoside$ (5) by comparison with previously reported spectral evidences. To investigate the anti-oxidative effect and nitric oxide (NO) production inhibitory activity of these compounds, DPPH radical scavenging activity and nitric oxide production inhibitory activity in $IFN-{\gamma}$, LPS stimulated RAW 264.7 cell were examined. The $IC_{50}s$ were determinied as follows : $1\;$IC_{50}=26.61\;{\mu}g/ml$, $2\;IC_{50}=25.30\;{\mu}g/ml$, $3\;IC_{50}=20.41\;{\mu}g/ml$, $4\;IC_{50}=18.23\;{\mu}g/ml$ , $5\;IC_{50}=30.46\;{\mu}g/ml$, $6\;IC_{50}=28.0;{\mu}g/ml$, $7\;IC_{50}=27.24\;{\mu}/ml$. These NO production inhibitory effects were significantly different compared with the positive control, L-NMMA $(IC_{50}=20.77\;{\mu}g/ml)$, respectively. Compound $1\;(IC_{50}=6.19\;{\mu}g/ml)$, $2\;(IC_{50}=8.98\;{\mu}g/ml)$, $3\;(IC_{50}=7.30\;{\mu}g/ml)$ and $4\;(IC_{50}=7.64\;{\mu}g/ml)$ also showed potent antioxidative activities similar level to ascorbic acid $(IC_{50}=9.22\;{\mu}g/ml)$. These results suggest that barks of A. arguta have a potent anti-oxidative and anti-inflammatory activity.

• Progress in Superconductivity and Cryogenics
• /
• v.21 no.2
• /
• pp.40-44
• /
• 2019

In this study, the effects of the compaction method for (Mg+2B) powders on the apparent density and superconducting properties of $MgB_2$ bulk superconductor were investigated. The raw powders used in this study were nano-sized boron (B) and spherical magnesium (Mg). A batch of a powder mixture of (Mg+2B) was put in a steel mold and uniaxially pressed at 1 ton or 3 tons into pellets. Another batch of the powder mixture was uniaxially pressed at 1 ton and then pressed isostatically at $1800kg/cm^2$ in the water chamber. All pellets were heat-treated at $650^{\circ}C$ for 1 h in flowing argon gas for the formation of $MgB_2$. The apparent density of powder compacts pressed at 3 ton was higher than that at 1 ton. The cold isostatic pressing (CIP) in a water chamber allowed further increase of the apparent density of powder compacts, which influenced the pellet density of the final products ($MgB_2$). The compaction methods (uniaxial pressing and CIP) did not affect the formation of $MgB_2$ and superconducting critical temperature ($T_c$) of $MgB_2$, but affected the critical current density ($J_c$) of $MgB_2$ significantly. The sample with the high apparent density showed high $J_c$ at 5 K and 20 K at applied magnetic fields (0-5 T).

• Fisheries and Aquatic Sciences
• /
• v.21 no.11
• /
• pp.32.1-32.7
• /
• 2018

Trout production is a growing activity in recent years but requires new alternative sources of feed to be sustainable over time. The objective of this research was to determine the apparent digestibility coefficient (ADC) of dry matter (DM), organic matter (OM), crude protein (CP) and digestible energy (DE) of $ka{\tilde{n}}iwa$ (Chenopodium pallidicaule Aellen), kiwicha (Amaranthus caudatus L), quinoa (Chenopodium quinoa Willd), beans (Phaseolus vulgaris L.), sacha inchi, (Plukenetia volubilis L) and jumbo squid (Dosidicus gigas) meal in juvenile rainbow trout. The experimental diets were composed of a 70% basal diet and 30% of any raw materials. The ADC was determined by the indirect method using insoluble ash as a non-digestible marker. Jumbo squid, sacha inchi and quinoa showed the highest values of ADC (%) of DM (84.5, 73.5 and 69.7), OM (89.1, 78.4 and 72.9), CP (93.2, 98.0 and 90.3), and DE (4.57, 4.15 and 2.95 Mcal/kg DM), respectively. The ADC values for $ka{\tilde{n}}iwa$, kiwicha and bean were significantly lower. In conclusion, quinoa meal and jumbo squid meal have an acceptable digestibility but sacha inchi meal is a potential alternative for rainbow trout feeding in the future.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2418-2425
• /
• 2021

Monazite is a phosphate mineral that contains thorium (Th) and rare earth elements. The Th concentration in monazite can be as high as 500 ppm, and it has the potential to be used as fuel in the nuclear power system. Therefore, this study aimed to conduct the techno-economic analysis (TEA) of Th extraction in the form of thorium oxide (ThO₂) from monazite. Th can be extracted from monazite through an alkaline fusion method. The TEA of ThO₂ production studied parameters, including raw materials, equipment costs, total plant direct and indirect costs, and direct fixed capital cost. These parameters were calculated for the production of 0.5, 1, and 10 ton ThO₂ per batch. The TEA study revealed that the highest production cost was ascribed to installed equipment. Furthermore, the highest return on investment (ROI) of 21.92% was achieved for extraction of 1 ton/batch of ThO₂, with a payback time of 4.56 years. With further increase in ThO₂ production to 10 ton/batch, the ROI was decreased to 5.37%. This is mainly due to a significant increase in the total capital investment with increasing ThO₂ production scale. The minimum unit production cost was achieved for 1 ton ThO₂/batch equal to 335.79 $/Kg ThO₂.

• Advances in materials Research
• /
• v.11 no.2
• /
• pp.121-146
• /
• 2022

In the recent years, the use of agricultural waste in green cement mortar and concrete production has attracted considerable attention because of potential saving in the large areas of landfills and potential enhancement on the performance of mortar. In this research, microparticles of palm oil fuel ash (POFA) obtained from a multistage thermal and mechanical treatment processes of raw POFA originating from palm oil mill was utilized as a pozzolanic material to produce high-performance cement mortar (HPCM). POFA was used as a partial replacement material to ordinary Portland cement (OPC) at replacement levels of 0, 5, 10, 15, 20, 25, 30, 35, 40% by volume. Sand with particle size smaller than 300 ㎛ was used to enhance the performance of the HPCM. The HPCM mixes were tested for workability, compressive strength, ultrasonic pulse velocity (UPV), porosity and absorption. The results portray that the incorporation of micro POFA in HPCMs led to a slight reduction in the compressive strength. At 40% replacement level, the compressive strength was 87.4 MPa at 28 days which is suitable for many high strength applications. Although adding POFA to the cement mixtures harmed the absorption and porosity, those properties were very low at 3.4% and 11.5% respectively at a 40% POFA replacement ratio and after 28 days of curing. The HPCM mixtures containing POFA exhibited greater increase in strength and UPV as well as greater reduction in absorption and porosity than the control OPC mortar from 7 to 28 days of curing age, as a result of the pozzolanic reaction of POFA. Micro POFA with finely graded sand resulted in a dense and high strength cement mortar due to the pozzolanic reaction and increased packing effect. Therefore, it is demonstrated that the POFA could be used with high replacement ratios as a pozzolanic material to produce HPCM.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.3
• /
• pp.181-194
• /
• 2017

This study aims to develop a regression model for forest volume estimation using field-collected forest inventory information and airborne LiDAR data. The response variable of the model is forest stem volume, was measured by random sampling from each individual plot of the 30 circular sample plots collected in Bonghwa-gun, Gyeong sangbuk-do, while the predictor variables for the model are Height Percentiles(HP) and Height Bin(HB), which are metrics extracted from raw LiDAR data. In order to find the most appropriate model, the candidate models are constructed from simple linear regression, quadratic polynomial regression and multiple regression analysis and the cross-validation tests were conducted for verification purposes. As a result, $R^2$ of the multiple regression models of $HB_{5-10}$, $HB_{15-20}$, $HB_{20-25}$, and $HBgt_{25}$ among the estimated models was the highest at 0.509, and the PRESS statistic of the simple linear regression model of $HP_{25}$ was the lowest at 122.352. $HB_{5-10}$, $HB_{15-20}$, $HB_{20-25}$, and $HBgt_{25}-based$ models, thus, are comparatively considered more appropriate for Korean forests with complicated vertical structures.