• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.483-490
• /
• 2010

The objectives of this study were to measure particle size and evaluate the effect of increasing alfalfa hay particle size on production characteristics in lactating Holstein dairy cows. Ninety multiparous Holstein cows in early to mid-lactation were randomly assigned in a complete randomized design for a 30-day period. Animals were offered one of the three diets, which were identical in energy, protein, and chemical composition, but differed only in particle size of alfalfa hay. The treatments were A) total mixed ration (TMR) in which only fine chopped alfalfa hay was incorporated in the ration, B) the same diet in which half of the alfalfa hay was fine chopped and incorporated in the mixed ration and half was long hay and offered as a top dressing, and C) the same diet with long hay alfalfa offered as a top dressing. Distribution of particle size of rations was determined through 20,000, 8,000 and 1,000 ${\mu}m$ sieves. The new method of quantitative determination of manure index was examined for each cow on different treatments. The geometric mean length of particle size in the rations was 5,666, 9,900 and 11,549 ${\mu}m$ for treatments A, B and C, respectively. Fat corrected milk (4%), milk fat percentage and production were significantly different (p<0.05) in treatment A versus B and C (fat corrected milk (FCM, 4%)) 28.3 vs. 35.2 and 32.3 kg/d, fat percentage 2.89, 4.04 and 3.62; but the change of ration particle size had no significant effect on milk production (p>0.05). Blood concentration of cholesterol in treatment A was significantly higher (p<0.05) than treatment B and C (181.0 vs. 150.0 and 155.2 mg/dl). Manure index in treatment C was significantly different (p<0.05) from treatment B (15.86 vs. 17.67). Based on these experimental findings, it is concluded that an increase in the ration particle size can increase milk fat percentage due to providing more physically effective fiber, which in turn could effect changes in manure consistency.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.3
• /
• pp.285-291
• /
• 1991

Two experiments were conducted to evaluate the effect of mold inhibitor in the ration which had two different protein levels (18% and 12%) and two different particle sizes (80 or 40% of the particles in the ration less than 1.19 mm). The experimental diets with ave. 12.7% moisture which were treated at the level of 0.1% mold inhibitor were stored under 85% humidity and at $29{\pm}1^{\circ}C$ for 10 to 40 days. In experiment 1, after 40 days of storage the $CO_2$ production in the feed treated with mold inhibitor was higher (p < 0.01) than when 40% of the ration's panicle size was 1.19 mm. Aflatoxin production in the experimental diet with mold inhibitor was affected (p<0.05) by the levels of protein and the different particle size ranges after 40 days storage. The interaction of protein levels and particle size ranges on the anatoxin and $CO_2$ production was significant (p<0.05) at 40 days storage. In experiment 2, there was a decrease in total body weight gain and total feed intake observed in chicks fed the untreated diet of 18% protein with 40% of the particles in the ration less than 1.19 mm stored for 40 days. Feed conversion was depressed (p<0.05) in the chicks fed the untreated diets of both particle sizes. Particle size X types of feed interaction in feed conversion was significant (p<0.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.12
• /
• pp.1755-1762
• /
• 2003

Two experiments were conducted to determine effects of particle size in total mixed ration (TMR) on performance of lactating cows. Three rumen cannulated Holstein cows were used in a $3{\times}3$ Latin square design for the metabolic experiment. The particle size of the diets was determined using the Penn State Particle Size Separator (PSPSS) and weighing the proportion of sample remaining on the top screen (19 mm diameter). The 3 treatments were short, medium or long diets (4.9, 24.2 and 27.8% of sample remaining on the top screen of the PSPSS, respectively). Nine farms in the Edmonton area were surveyed and the farms were placed into groups based on the particle size of the ration fed. The groups were short ${\leq}6%$, medium 7-12% and long ${\geq}13%$ of sample weight remaining on the top screen of the PSPSS. Dry matter intake was greater (p=0.07) for the medium diet than the long diet in the metabolic study and resulted in a higher (p=0.07) efficiency of milk production. On the commercial farms, a significantly (p=0.002) lower milk fat percentage was observed for the long diet compared to the short diet. The results of these studies confirm that forage particle size influences milk composition and milk fat was negatively correlated to TMR particle size.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.94-102
• /
• 1999

Ni/CGO cermets were fabricated as the anode for SOFC which uses CGO as the electrolyte. And their electrical conductivity, electrochemical reactivity, and thermal expansion coefficient were optimized through the variation of NiO/CGO particle size ration and their composition. The electrical conductivity of the cermet was increased abruptly at a certain Ni content and the percolation concentration was decreased with the decreasing particle size ratio. Anodic overpotential was also decreased with the decreasing particle size ratio. For a fixed ratio it showed a minimum value at 50 wt.%. Thermal expansion coefficient was increased monotonically with increasing Ni contents, however it did not depend on the size ratio. With three properties taken into account, the cermet of particle size ration of 0.03 and composition of 50 wt.% was judged to be optimal as the anode.

• Korean Journal of Poultry Science
• /
• v.15 no.4
• /
• pp.261-268
• /
• 1988

The effect of two particle size ranges (80% of the particles in the ration less than 1.19mm ; and 40% of the particles in the ration less than 1.1mm) and two different levels of protein (18% and 12% ) on the activity of mold inhibitors in commercial ration was determined by measuring mold count, CO$30^{\circ}C$ production and aflatoxin concentration. A commercial fungistat was mixed in the treated diets at the level of 0.1% (W/W). Two types of experimental diets (18% & 12% protein) which contained 12.6 and 12.7% moisture content each were stored under the forced air humidifier at 85% humidity and a controlled-temperature of 29＋1$30^{\circ}C$ for 5 to 40 days. Mold count and CO$30^{\circ}C$ levels in the feed treated with mold inhibitor were significantly higher (P＜0.05 and P＜0.01 respectively) when 40% of the ration's particle size was<1.19mm. The different protein levels in the ration treated with mold inhibitor did not have a significant effect (P＞0.05) on the mold count and $CO_2$ production. Protein level $\times$ particle size range interaction on the $CO_2$ production was significant (P＜0.05). Aflatoxin production in the experimental diet with mold inhibitor was significantly (P＜0.05) affected by the levels of protein and the different particle size ranges. The interaction of protein levels and particle size ranges on the aflatoxin production was significant (P＜0.05) at 40 days of storage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.1
• /
• pp.80-85
• /
• 2018

Objective: This study was conducted to investigate the effect of corn grain particle size on ruminant fermentation and blood metabolites in Holstein steers fed total mixed ration (TMR) as a basal diet to explain fundamental data of corn grain for cattle in Korea. Methods: Four ruminally cannulated Holstein steers (body weight $592{\pm}29.9kg$) fed TMR as a basal diet were housed individually in an auto temperature and humidity modulated chamber ($24^{\circ}C$ and 60% for 22 h/d). Treatments in a $4{\times}4$ Latin square design were TMR only (control), TMR with whole corn grain (WC), coarsely ground corn grain (CC), and finely ground corn grain (FC), respectively. The corn feeds substituted for 20% energy intake of TMR intake. To measure the ruminal pH, ammonia N, and volatile fatty acids (VFA), ruminal digesta was sampled through ruminal cannula at 1 h intervals after the morning feeding to determine ruminal fermentation characteristics. Blood was sampled via the jugular vein after the ruminal digesta sampling. Results: There was no difference in dry matter (DM) intake between different corn particle size because the DM intake was restricted to 1.66% of body weight. Different corn particle size did not change mean ammonia N and total VFA concentrations whereas lower (p<0.05) ruminal pH and a ratio of acetate to propionate, and higher (p<0.05) propionate concentration were noted when the steers consumed CC compared with WC and FC. Concentration of blood metabolites were not affected by different particle size of corn grain except for blood triglyceride concentration, which was significantly (p<0.05) increased by FC. Conclusion: Results indicate that feeding CC may increase feed digestion in the rumen, whereas the FC group seemed to obtain inadequate corn retention time for microbial degradation in the rumen.

• Korean Journal of Poultry Science
• /
• v.15 no.4
• /
• pp.269-275
• /
• 1988

The effect of mold inhibitor was determined in the commercial rations which had two different protein levels(18% and 12% ) and two different particle sizes(80% of the particles in the ration less than 1.19mm and 40% of the particles in the ration less than 1.1mm). After 40 days storage of the rations treated and not treated with the mold inhibitor the nutritional change of the experimental diets with 18% and 12% protein levels, the growth performance of chicks, and the weight of internal organs fed the 18% protein diet were observed as the criteria of this research The fat level and carotene content in the two diets with 18% and 12% protein level each were significantly (P＜0.05) decreased when the diets were not treated by the mold inhibitor. Even if mold inhibitor was mixed in the diet, the fat content in the diet which had 40% of the particles in the ration less than 1.19mm tended to be decreased, especially, in the diet with a 12% protein level. The carotene content in the diet treated with mold inhibitor which had 40% of the particles in the ration less than 1.19mm also tended to be decreased in both diets (18% protein and 12% protein). Feed types$\times$particle size interaction was significant for the fat content (P＜0.05) and for the carotene content (P＜0.05). The amount of crude protein and ADF was not significantly (P＞0.05) changed after 40 days storage. There was a significant decrease (P＜0.05) in total body weight gain and total feed intake observed in chicks fed the untreated diet with 40% of the particles in the ration less than 1.19mm. Feed conversion was significantly (P＜0.05) depressed in the chicks fed the untreated diet of both particle sizes. Particle size$\times$types of feed interaction in feed conversion was significant (P＜0.05). Relative sizes of the liver, pancreas and spleen were not affected significantly (P＞0.05) by the treatments.

• Preventive Nutrition and Food Science
• /
• v.4 no.1
• /
• pp.1-5
• /
• 1999

Seven rice varietes(Suweonjo, Suweon232 , BG276-5, IR44, IR41999-139, Suweon230 and Yongjubyeo) were used to study the influence of amylose content and particle size on the physicochemical properties of rice flours. Suweonjo has the highest amylose content (27.1% amylose content) had the finest flour particle as supproted by scanning electron microscopy (SEM). Suweonjo had the highest value in hardness of rice grain but the lowest length/width ration. There were no significant differences in color values among the rice flours. Data of brabender visco/amylograph was not associated with amylose content. Yongjubyeo had the highest maximum viscosity and breakdown value while Suweonjo had the lowest maximum viscosity , setback value and breakdown value. Yongjubyeo had the lowest water solubility index (WSI). The Suweon232 rice variety absorbed more water than any other varieties but rice varieties and amylose contents affected water absorption a little.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.618-629
• /
• 1991

The purpose of this experiment is to understand the distribution of coal particles inside CWM droplet which is believed to be a very important factor controlling the flame stability. CWM slurry is atomized by an air assisted twin fluid nozzle. An experimental rig is designed and fabricated. The mean size of coal particle distribution in CWM slurry, atomizing air pressure, coal particle loading in slurry and sampling position inside spray are main experimental variables. The atomized CWM droplets are sampled on the thin white layer of magnesium oxide by the emergency sampling shutter. The sampled coal particles on magnesium oxide layers are collected into test tubes and dispersed completely by Ultra-Sonicator. The size distribution of coal particles inside droplets are measured by Coulter Counter. The presence of coal particle inside the impressions of droplets on magnesium oxide layer are investigated by photo technique. There are quite many droplets which do not have any coal particles. Those are just water droplets, not CWM droplets. The population ratio of droplets without coal particles to toal number of droplets is strongly affected by the mean size of coal particle distribution in slurry and this ration becomes bigger number as the mean size of coal particles be larger. The size distribution of coal particles inside CWM droplets is not even and depends on the size of droplet. Experimental results show that the larger CWM droplets has droplets has bigger mean value of particle size distribution. This trend becomes more evident as the atomizing air pressure is raised and the mean size of coal particles in CWM slurry is bigger. That is, the distribution of coal particles inside CWM dropolets is very much affected by the atomizing air pressure and the mean size of pulverized coal particles in CWM slurry.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1993.10a
• /
• pp.23-28
• /
• 1993

Shearing properties of soil reinforced with discrete randomly oriented inclusions depend on soil density, particle size, grading, fiber length, tensile strength and stiffness of fiber, mixing ration of fiber, confining stress, etc.. In this paper the effects of those various factors on shear strength of the fiber-reinforced soil was evaluated through triaxial tests and uniaxial tests. Tests were performed on two sandy soils and one silty soil with inclusions in varing lengths, contents and tensile strengths and tested at different confining stresses in triaxial test. From the experimental results, it was investigated if there is an optimal range of fiber lengths and fiber contents for the tested soils.