• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.161-162
• /
• 2022

The purpose of this study is to determine the viscosity of the polymer-cement composites(PCCs) for crack repair of RC structures and to investigate its compaction. According to the study on the viscosity and compaction property of PCCs for crack repair, the viscosity of PCCs varies greatly depending on the polymer type and polymer cement ratio, and by mixing silica fume into PCCs, appropriate viscosity and excellent flow can be controlled without separation of cement and water. As a result of this study, basic data on the viscosity, fluidity, and compaction properties of PCCs for crack repair of RC structure can be obtained.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.197-198
• /
• 2023

This study was conducted as part of research and development of high-strength grout. Accordingly, dolomite aggregate was used as a filler incorporated into the high-strength grout. Dolomite aggregate has a disadvantage of increasing the viscosity of the grout due to higher generation of fine powder than other aggregates. Accordingly, in this experiment, it was confirmed that the viscosity, flow time, and flow of high-strength grout change according to the volume composition ratio of dolomite aggregate and cement-based material. All experiments were conducted based on the Korean Industrial Standard KS F 4044, and the mixing factor was applied according to the composition ratio of the binder and the filler. In the experiment, the amount of fine powder contained in the dolomite aggregate rather than the silica sand used in the past is grasped, and after mixing with the grout accordingly, the mixture is proceeded to measure the viscosity in an unhardened state. In addition, the flow and flow time of the grout are evaluated according to the viscosity. As a result of the experiment, it was confirmed that the viscosity and flow time decreased and the flow increased as the volume composition ratio of the dolomite aggregate to the cement-based material increased.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.21-24
• /
• 2014

In the entrained-flow coal gasifier, coal ash turns into a molten slag most of which deposits onto the wall to form liquid and solid layers. Critical viscosity refers to the viscosity at the interface of the two layers. The slag layers play an important role in protecting the wall from physical/chemical attack from the hot syngas and in continuously discharging the ash to the slag tap at the bottom of the gasifier. For coal with high ash melting point and slag viscosity, CaO-based flux is added to coal to lower the viscosity. This study evaulates the effect of critical viscosity temperature and ash/flux ratio on the slag behavior using numerical modelling in a commercial gasifier. The changes in the slag layer thickness, heat transfer rate, surface temperature and velocity profiles were analyzed to understand the underlying mechanism of slag flow and heat transfer.

• Korea-Australia Rheology Journal
• /
• 제16권3호
• /
• pp.153-160
• /
• 2004

Open microcellular foams having small-sized cell and good mechanical properties are desirable for many practical applications. As an effort to reduce the cell size, the microcellular foams combining viscosity improvers into the conventional formulation of styrene and water system were prepared via high internal phase emulsion polymerization. Since the material properties of foam are closely related to the solution properties of emulsion state before polymerization, the flow behavior of emulsions was investigated using a controlled stress rheometer. The yield stress and the storage modulus increased as viscosity improver concentration and agitation speed increased, due to the reduced cell size reflecting both a competition between the continuous phase viscosity and the viscosity ratio and an increase of shear force. Appreciable tendency was found between the rheological data of emulsions and the cell sizes of polymerized foams. Cell size reduction with the concentration of viscosity improver could be explained by the relation between capillary number and viscosity ratio. A correlative study for the cell size reduction with agitation speed was also attempted and the result was in a good accordance with the hydrodynamic theory.

• 반도체디스플레이기술학회지
• /
• 제23권2호
• /
• pp.65-70
• /
• 2024

Using a computational fluid dynamics(CFD) simulation tool, we have provided a coating guideline for slot-die coating with a double layer slot die head. We have analyzed the fluid dynamics in terms of the coating speed, flow rate ratio, and viscosity ratio, which are critical for the stability of coating meniscus. We have identified the common coating defects such as break-up, air entrainment, and leakage by varying the coating speeds. The flow rate ratio is the critical parameter determining the wet film thickness of the top and bottom layers. It is shown that when the flow rate ratio exceeds or equals 1.8, air entrainment occurs due to insufficient hydraulic pressure in the bottom layer, even though the total flow rate remains constant. Furthermore, we have found that the flow of the bottom layer is significantly affected by the viscosity of top layer. The viscosity ratio of 4 or higher obstructs the flow of the bottom layer due to the increased hydraulic resistance, resulting in leakage. Finally, we have demonstrated that as the viscosity ratio increases from 0.1 to 10, the maximum coating speed rises from 0.4 mm/s to 1.6 mm/s, and the minimum wet film thickness decreases from 800 ㎛ to 200 ㎛.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.166-167
• /
• 2021

The purpose of this study is to evaluate the viscosity and flowability of polymer-cement composites for repairing cracks of RC structures. The viscosity and flowability of the polymer cement composites differed greatly depending on the type of polymer and the polymer cement ratio, and the polymer cement composites could be produced that could repair fine cracks in the RC structure without material separation by adjusting the proper water-cement ratio. In particular, the mixing of high viscosity EVA-modified polymer composites could be adjusted.

• 동아시아식생활학회지
• /
• 제25권1호
• /
• pp.162-175
• /
• 2015

The purpose of this thesis was to develop pumpkin soup with different ratios of ingredients, using high-nutrient sweet pumpkins. P10G0 without sweet pumpkin and glutinous rice powder showed the highest moisture content, whereas, P5G0 whit Cheongdung pumpkin and sweet pumpkin at the same ratio whitout glutinous rice powder showed the lowest moisture content. For chromaticity lightness of control pumpkin soup scored the lowest. Lightness of P10G0 without sweet pumpkin and glutinous rice powder also scored the lowest. For redness, the P5 group with Cheongdung pumpkin and sweet pumpkin at the same ratio scored the highest while the P10 group without sweet pumpkin scored the lowest. As for yellowness, increased ratio of glutinous rice powder in pumpkin soup scored resulted in reduced yellowness in all groups P5 (p<0.01), P7 and P10 (p<0.001) A higher ratio of Cheongdung pumpkin was thus generally associated whit reduced yellowness (p<0.001). For the spread-ability, higher ratio of sweet pumpkin to Cheongdung pumpkin resulted in significant reduction of spread-ability. However, groups with 12% glutinous rice powder showed no significant differences. Spread-ability of the P5 and P10 groups significant increased and thereafter decreased according to the addition ratio of glutinous rice powder, viscosity of the G0 and G4 groups decreased according to the addition ratio of Cheongdung pumpkin, whereas they first decreased and then increased in the G8 and G12 groups. All groups showed increased viscosity whit more glutinous rice powder. For the sensory evaluation, P5G8 was mostly preferred in all aspects. P7G4 was superior in all aspects except for flavor. P10G4 scored the highest in all aspects except viscosity. For acceptance test, except for the control group, P7G4 whit added of 70% Cheongdung pumpkin, 30% sweet pumpkin and 4% glutinous rice powder was the most preferred in all aspects except color (gloss, viscosity, flavor, taste and overall quality).

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.132-141
• /
• 1992

본 연구에서는 실제적으로 베나트 대류의 발생시 유체층의 상하면은 적당한 대류 열전달 계수를 가지고 있게 되는데, 이와 같은 경계 조건을 가진 가변 점성 유 체의 안정성은 연구된 바가 없다. 이에 따라 본 연구를 수행하게 되었으며 유체의 점성이 지수 함수적으로 (.nu.=.nu.o exp(-CT)) 변화할 경우를 관찰하였다. Fig.1은 대 상이 된 유체층을 보인 것으로 하부는 고정되어 있고 상부는 고정되어 있거나 자유 표 면 상태이다. 유체층의 하부는 상부보다 더 뜨겁게 되어 있는데, 이것은 유체층의 상부는 차가운 주위로 열을 빼앗기며 하부는 뜨거운 주위로부터 가열되기 때문이다. 이때 상하부의 냉각 및 가열 경계 조건은 대류경계 조건으로 주어진다. 열팽창 계수 는 양이며 온도의 증가에 따라 점성은 감소한다.이와 같은 온도-점성 관계, 수력학 적 경계조건, 열적 조건등은 프란틀 수가 큰 유체에서 표본적으로 나타나는 것들로서 선형적 안정 이론을 적용하여 옳은 결과를 얻을 수 있다.

• Tribology and Lubricants
• /
• 제24권1호
• /
• pp.1-6
• /
• 2008

An experimental study was conducted to evaluate the viscosity characteristics of multi-grade engine oils in which contain diesel fuels. Unused engine oils of SAE 5W40, 10W40 and 15W40 were blended with a diesel fuel ratio of 5%, 10%, and 15%. The viscosity of a diluted engine oil was measured with temperature variation ranging from $-20^{\circ}C$ to $120^{\circ}C$ using a rotary viscometer. The diluted engine oil in which is blended to a diesel fuel plays an important role for decreasing an engine oil viscosity, which may decrease the oil film thickness and a load-carrying capacity. Test results show that the viscosity tends to fall for the increased temperature when engine oil is mixed with a diesel fuel. Especially, the viscosity at a low temperature zone is radically decreased compared with a high temperature zone. Based on the experimental results, the empirical equation that can predict the viscosity of diluted engine oil is expressed in the exponential function with the variation of the temperature and a fuel ratio of diluted engine oil. This equation may be possible to predict the limitation of the oil-fuel dilution rate at the concept design stage of the CDPF system, which doesn't affect the influence of the tribological components.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.52-53
• /
• 2018

In this study, viscosity analysis of the lightweight foamed mortar was conducted to evaluate the foam stability. According to a series of experiment, void volume related with density of the mixture and viscosity of the mixture were infleunced by water-to-binder ratio and addition of viscosity modifying admixture (VMA). Especially, the stability of the foam inside the mortar was confirmed with adding VMA.