• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.849-854
• /
• 2008

For the running safety assessment of Saemaul train passing through curves, an analysis model for multibody system has been developed. By using this model and ADAMS/Rail, sensitivity analyses depending on the variation of parameters related to the derailment coefficients have been conducted. According to the increase of running speed, the derailment coefficient and unload ratio were increased. At high speed, the derailment coefficient and unload ratio of left wheel showed higher than right wheel. If the cant increased, the derailment coefficient and unload ratio increased. but decreased based on the balance cant value by the curvature and running speed.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 추계 학술대회논문집
• /
• pp.44-50
• /
• 2001

A numerical study was made to choose the better turbulence model for the flow in the discharge flow path from a diffuser to a wall. In this study standard $\kappa-\epsilon$ model(SKE), RNG $\kappa-\epsilon$ model(RNG), and Reynolds stress model(RSM) were applied. In case of the flow with relatively high Reynolds number at a diffuser inlet, the pressure loss coefficients by RNG have a tendency to be near to those by SKE at small ratio(below about 0.35) of $h/D_o$, but to those by RSM at large ratio(above about 0.35). At large ratio RNG begins to enlarge the effects of rapid strain and streamline curvature. RNG & RSM are recommended as the appropriate turbulence models for this case. But it is noticeable that the velocity gradient pattern in RNG is same as in SKE, and also that the total pressure distribution in RNG is same as in RSM only at swirling flow area, same as in SKE only at main flow area.

• Advances in concrete construction
• /
• 제9권3호
• /
• pp.289-299
• /
• 2020

To investigate the long-term behavior of eccentrically loaded RC columns, which are more realistic in practice than concentrically loaded RC columns, long-term eccentric loading tests were conducted for 10 RC columns. Test parameters included concrete compressive strength, reinforcement ratio, bar yield strength, eccentricity ratio, slenderness ratio, and loading pattern. Test results showed that the strain and curvature of the columns increased with time, and concrete forces were gradually transferred to longitudinal bars due to the creep and shrinkage of concrete. The long-term behavior of the columns varied with the test parameters, and long-term effects were more pronounced in the case of using the lower strength concrete, lower strength steel, lower bar ratio, fewer loading-step, higher eccentricity ratio, and higher slenderness ratio. However, in all the columns, no longitudinal bars were yielded under service loads at the final measuring day. Meanwhile, the numerical analysis modeling using the ultimate creep coefficient and ultimate shrinkage strain measured from cylinder tests gave quite good predictions for the behavior of the columns.

• Steel and Composite Structures
• /
• 제27권4호
• /
• pp.479-493
• /
• 2018

In this paper nonlocal free vibration analysis of a doubly curved piezoelectric nano shell is studied. First order shear deformation theory and nonlocal elasticity theory is employed to derive governing equations of motion based on Hamilton's principle. The doubly curved piezoelectric nano shell is resting on Pasternak's foundation. A parametric study is presented to investigate the influence of significant parameters such as nonlocal parameter, two radii of curvature, and ratio of radius to thickness on the fundamental frequency of doubly curved piezoelectric nano shell.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.258-264
• /
• 1999

In this study, a computer program was developed for analysis of the orthotropic curved ring sector plates. In the developing program , the thin-plate theory and multi-base coordinate system was adopted. The effect of design factors-boundary conditions, loading conditions, steel ratio, open angle, radius of curvature and relative flexural rigidity between slab and edge-beam-on the behavior of the circular ring sector plates were discussed. Also, the practical limitations was proposed to replace the problem of the orthotropic sector plate by equivalent rectangular plage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.453-458
• /
• 1996

In reinforced concrete structure, it is very important to secure ductile performance of column because the columns become brittle failure and cause the collapse of an entire structure and the damage of human life. This study is intending to seek the quantity of transverse steels in square reinforced concrete columns which is derived from moment-curvature analysis of cross section about various arrangements of transverse steel and the ratio of axial force and to propose the design method to secure the sufficient ductile behavior subjected to complex loading.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.683-687
• /
• 2007

Internally Confined Hollow-Concrete Filled Tube(ICH-CFT) column which has two tubes on both side of concrete, inner tube and outer tube perform great seismic abilities, ductility and absorption of energy, by the tubes and the hollow pmt. So this study does qualitative analysis about seismic capacities depending on parameters diameter of column, hollow ratio, thickness of tubes - by moment-curvature analysis.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.144-147
• /
• 2007

Internally Confined Hollow-Concrete Filled Tube(ICH-CFT) column which has two tubes on both side of concrete, inner tube and outer tube perform great seismic abilities, ductility and absorption of energy, by the tubes and the hollow part. So this study does qualitative analysis about seismic capacities depending on parameters - diameter of column, hollow ratio, thickness of tubes - by moment-curvature analysis.

• 한국지진공학회논문집
• /
• 제10권1호
• /
• pp.41-49
• /
• 2006

지난 1982년 우라카와 근해지진 및 1995년 효고현 남부 지진 등에 의하여 주철근이 겹침이음된 많은 교각들이 주철근 겹침이음부의 활동에 의한 휨-전단파괴를 발생하였음을 경험하였다. 철근콘크리트 교각의 내진성능은 소성힌지구간의 변형능력에 좌우되고 있으며, 이는 곡률연성도로서 평가된다. 우리나라에서는 1992년 내진 설계가 도입된 이후 철근콘크리트 교각의 주철근겹침이음에 대한 규정이 없었으나, 2005년 도로교 설계기준에서 주철근겹침음을 50% 이내에서 허용하고 있다. 본 연구는 단면 직경이 600 mm이고 형상비가 2.5 및 3.5인 주철근 겹침이음이 있는 철근콘크리트 교각에 대하여 지진시 소성힌지부의 곡률분포 및 곡률연성도에 대하여 조사하였다. 실험은 일정한 축력 $P=0.1f{ck}A_g$가 재하된 상태에서 변위제어 방식으로 준정적실험을 실시하였다. 실험결과 반복하중에 의한 주철근 겹침이음부에 활동이 발생하면, 주철근 겹침이음 구간 내의 곡률이 주철근 겹침이음이 없는 경우와 다르게 나타났다. 다시 말하면 주철근 겹침이음 실험체의 겹침이음 구간 중의 하부 곡률은 주철근 겹침이음이 없는 실험체의 경우보다 큰 값을 보이고 있으며, 상부는 작은 값을 보였다. 이로 인하여 교각실험체의 손상은 겹침이음 구간의 하부에 집중되어 휨파괴되는 모습으로 보이는 양상을 보였다.

• 콘크리트학회논문집
• /
• 제26권6호
• /
• pp.687-694
• /
• 2014

이 연구에서는 철근콘크리트 전단벽의 경계요소의 연성설계를 위한 변위연성비모델을 제시하였다. 부재의 길이에 따른 곡률과 자유단에서의 변위를 산정하기 위한 전단벽의 단면의 변형률 및 내부힘들의 분포는 베르누이(Bernoulli)의 정리, 변형률 적합조건 및 힘의 평형조건을 이용하여 이상화하였다. 경계요소내의 횡보강근에 의한 구속효과는 Razvi and Saatcioglu에 의해 제시된 콘크리트의 응력-변형률 관계를 이용하여 고려하였다. 항복시 및 최대내력 이후 최대모멘트 80%에서의 곡률은 등가소성 힌지길이 개념을 도입하여 변위값으로 환산하였다. 일반화된 변위연성비의 모델은 다양한 범위에서 수행된 변수연구로부터 얻어진 데이터들의 회귀분석을 통하여 단순식으로 정립되었다. 제시된 단순모델은 실험결과 대비 평균, 표준편차 및 변동계수가 각각 1.05, 0.19 및 0.18로 대부분의 실험결과의 경향을 잘 예측하였다. 따라서 제시된 모델은 경계요소에서 소요연성비에 따른 횡보강근의 상세를 결정하는데 쉽게 이용될 수 있을 것으로 기대된다.