• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.107-111
• /
• 2001

This paper presents a detailed analysis method of the universal input forward converter with LC input filter operating in discontinuous capacitor voltage mode(DCVM) for wind power generation. In this analysis, condition for DCVM operation and conversion ratio for rectified sinusoidal input are made clear. To verify the validity of the analysis, simulation is carried out for the universal input ranging from 90 $V_{rms} to 260 V_{rms}$

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11a
• /
• pp.673-676
• /
• 2002

저가형 디지털 카메라에 사용되는 광학계의 경우 상대적으로 많은 렌즈 왜곡을 보인다. 이러한 현상은 제조 가격 및 소형 구현시의 제한에 기인하는 것으로 렌즈 재설계를 통한 물리적 보정에는 비용 및 구현시 부피 등의 측면에서 바람직하지 못한 것으로 여겨진다. 본 연구에서는 이러한 렌즈 왜곡을 소프트웨어 측면에서 보정하는 경우에 카메라 캘리브레이션을 통한 렌즈 왜곡 변수를 계산하는 방법 및 계산된 렌즈 왜곡 변수를 이용하여 왜곡된 원영상을 이미지 워핑을 통해 보정하는 방법에 대해 알아본다. 아울러 이러한 방법의 적용 타당성을 살펴보기 위하여 카메라 캘리브레이션을 통해 scale factor ratio 및 이미지 센터와 같은 카메라 상수를 처리하는 방식에 대해 살펴보고자 한다.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.3-4
• /
• 2012

역률개선용 변환기는 입력전류를 교류전원과 동상으로 제어하여 다이오드 정류기에 비해 역률을 개선하고 THD를 저감시킬 수 있다. 본 논문에서는 단상 역률개선용 배전압 변환기를 IP 제어기와 Anti Wind-up Control을 사용하여 출력전압의 크기를 안정되게 제어하며 PI 제어기와 Anti Wind-up Control을 사용하여 입력전류가 입력전압과 동상이 되도록 제어한다. 또한 Duty-ratio Feed Forward Control을 사용하여 디지털 제어에 의한 진상현상을 저감시킨다. 본 논문에서는 소형화와 경량화가 가능하고 출력전압이 높은 역률개선용 단상 브리지리스 배전압 변환기를 구현한다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1416-1418
• /
• 2005

This paper presents a new hybrid control method of asymmetrical half-bridge converter(AHBC) with low voltage stresses of the diodes and interleaved PFC(power factor correction). The proposed new control scheme can observe variation of secondary diodes voltage stresses by variation of duty ratio and then decide the control portions which are asymmetrical control and PFM(Pulse Frequency Modulation). Therefore, the proposed control scheme has many advantages such as a low rated voltage of the secondary diodes, low conduction loss according to the low voltage drop and wide zvs range by load variation. Through simulation results, the validity of the proposed control scheme is demonstrated.

• Land and Housing Review
• /
• v.11 no.1
• /
• pp.59-66
• /
• 2020

This thesis investigates relationship between Stock-to-Flow price and housing starts in Seoul metropolitan form 2008 year to 2019 year. The paper tests the relationship through two time-series models such as a vector error correction model and Dynamic Panel regression model. The model results show evidence of positive correlation between Stock-to-Flow price and housing starts in the long run. By transforming the regional data into a panel data set and running a fixed effects model, we test the explanatory power of PBR on housing starts. The result of VECM confirms that one unit uprising PBR raises up apartment construction by 7.4%. This result supports that PBR is a major factor in choosing a start of housing construct. Base on the result of empirical model, We also suggest that the market self-regulation function of housing providers is operating in the entire metropolitan area market.

• Food Science and Biotechnology
• /
• v.14 no.3
• /
• pp.334-339
• /
• 2005

An instrument using thermal probe method was designed to measure thermal conductivity of liquid and solid foods. Thermal conductivity probe was designed with diameter to length ratio of 100 and diameter of 0.51 mm to minimize axial flow effect on thermal conductivity measurement. Thermal conductivities of distilled/deionized water, glycerin, and beef frankfurter meat were measured at $20-80^{\circ}C$. Mean thermal conductivity values of water showed less than 2.0% difference from several reference values without using time correction factor or probe calibration constant. For glycerin, difference was less than 0.7% from reference values at $20-50^{\circ}C$. Mean values of thermal conductivity for beef frankfurter meat ranged from 0.389 to $0.350\;W/m{\cdot}K$ at $20-80^{\circ}C$.

• Advances in nano research
• /
• v.5 no.2
• /
• pp.113-126
• /
• 2017

This paper proposes a new nonlocal higher-order hyperbolic shear deformation beam theory (HSBT) for the static bending and vibration of nanoscale-beams. Eringen's nonlocal elasticity theory is incorporated, in order to capture small size effects. In the present model, the transverse shear stresses account for a hyperbolic distribution and satisfy the free-traction boundary conditions on the upper and bottom surfaces of the nanobeams without using shear correction factor. Employing Hamilton's principle, the nonlocal equations of motion are derived. The governing equations are solved analytically for the edges of the beam are simply supported, and the obtained results are compared, as possible, with the available solutions found in the literature. Furthermore, the influences of nonlocal coefficient, slenderness ratio on the static bending and dynamic responses of the nanobeam are examined.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.8-14
• /
• 2023

This paper proposes a PFC converter with a double step-up function using an asymmetrical PWM scheme. For the conventional PWM scheme, the input voltage range, which maintains a double step-up function, is limited because the proposed converter has different voltage gains and characteristics when the duty ratio(D) is less than 0.5. The proposed converter has a constant voltage gain regardless of the magnitude of the input voltage and can achieve output voltage balancing by using the asymmetrical PWM scheme. A 1.6-kW prototype of the proposed converter was built and tested to verify the performance.

• Structural Engineering and Mechanics
• /
• v.88 no.3
• /
• pp.201-208
• /
• 2023

In this work, the effect of the correction fibers direction on the efficiency of repairing damaged composite plates was highlighted. The composite plates studied in this work consist of eight layers of graphite/epoxy, while the patch used in this repair consists of four layers of the same type. The results obtained in this work, whether with regard to the experimental or analytical side, showed that the fibers orientation affects the repair efficiency, so the closer the angle of fibers inclination is to the tensile strength direction, the performance of the composite material is ideal. Hence, we conclude that the composite materials with longitudinal fibers (Parallel to tensile strength) is the most powerful and efficient material in performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.979-983
• /
• 2007

In this thesis, a strip layout drawing of LCD S/C (shield case) was prepared. In the press die, strip layout drawing is a major factor that decides the mass production of a product. The 3D CAD/CAM system was applied for the easy correction of the interference factor with other parts to be mounted. The material use ratio was enhanced to 60.17% by optimizing the blank layout and strip layout in double width array. Furthermore, the flatness of the product was made to fit the requirements by adding the bidding process intensively on the notching part where the occurrence of the change in shape is expected owing to the thin material. For the 3D CAD/CAM software, Unigraphics NX3.0 was used. The strip layout drawing was prepared in 12 processes.