• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1422-1426
• /
• 1987

In this paper, an adaptive DPCM scheme is presented for encoding monochrome images with easy hardware implementation at a transmission rate of exactly 1 bit/pel. The system is mainly composed of a compensated mean predictor and an adaptive two-level quantizer with backward estimation. In this system, the predictor is a sort of two-dimensional ARMA predictor in which a moving-average part is added to the conventional mean predictor. The quantizer adapts to the local statistics of its input without overhead information. To reduce annoying granular noise in the reconstructed image, Lee filter is used after reconstruction in the receiver.

• Journal of information and communication convergence engineering
• /
• 제6권1호
• /
• pp.19-23
• /
• 2008

The AQM (Active Queue Management) starts dropping packets earlier to notify traffic sources about the incipient stage of congestion. The AQM improves fairness between response flow (like TCP) and non-response flow (like UDP), and it can provide high throughput and link efficiency. In this paper, we suggest the QVARED (Queue Variation Adaptive RED) algorithm to respond to bursty traffic more actively. It is possible to provide more smoothness of average queue length and the maximum packet drop probability compared to RED and ARED (Adaptive RED). Therefore, it is highly adaptable to new congestion condition. Our simulation results show that the drop rate of QVARED is decreased by 80% and 40% compare to those of RED and ARED, respectively. This results in shorter end-to-end delay by decreasing the number of retransmitted packets. Also, the QVARED reduces a bias effect over 18% than that of drop-tail method; therefore packets are transmitted stably in the bursty traffic condition.

• Journal of Communications and Networks
• /
• 제8권4호
• /
• pp.422-431
• /
• 2006

This paper proposes an adaptive routing protocol called ARCA for converged ad-hoc and cellular network (CACN). Due to the limitation of both bandwidth and transmission range in a cell, a mobile host (MH) may not be able to make a call during busy time. CACN offers a flexible traffic diversion mechanism that allows a MH to use the bandwidth in another cell to ease the congestion problem and increase the throughput in a cellular network. Based on the presentation of CACN's physical characteristics, the paper details the design issues and operation of the adaptive routing protocol for CACN (ARCA). Detailed numerical analysis is presented in terms of both route request rejection rate and routing overhead, which, along with the simulation results, have indicated the effectiveness and efficiency of the ARCA protocol.

• Journal of Communications and Networks
• /
• 제16권3호
• /
• pp.322-334
• /
• 2014

Multimedia content is very sensitive to packet loss and therefore multimedia streams are typically protected against packet loss, either by supporting retransmission requests or by adding redundant forward error correction (FEC) data. However, the redundant FEC information introduces significant additional bandwidth requirements, as compared to the bitrate of the original video stream. Especially on wireless and mobile networks, bandwidth availability is limited and variable. In this article, an adaptive FEC (A-FEC) system is presented whereby the redundancy rate is dynamically adjusted to the packet loss, based on feedback messages from the client. We present a statistical model of our A-FEC system and validate the proposed system under different packet loss conditions and loss probabilities. The experimental results show that 57-95%bandwidth gain can be achieved compared with a static FEC approach.

• ETRI Journal
• /
• 제29권4호
• /
• pp.445-451
• /
• 2007

An adaptive modulation scheme is presented for multiuser orthogonal frequency-division multiplexing systems. The aim of the scheme is to minimize the total transmit power with a constraint on the transmission rate for users, assuming knowledge of the instantaneous channel gains for all users using a combined bit-loading and subcarrier allocation algorithm. The subcarrier allocation algorithm identifies the appropriate assignment of subcarriers to the users, while the bit-loading algorithm determines the number of bits given to each subcarrier. The proposed bit-loading algorithm is derived from the geometric progression of the additional transmission power required by the subcarriers and the arithmetic-geometric means inequality. This algorithm has a simple procedure and low computational complexity. A heuristic approach is also used for the subcarrier allocation algorithm, providing a trade-off between complexity and performance. Numerical results demonstrate that the proposed algorithms provide comparable performance with existing algorithms with low computational cost.

• 한국정밀공학회지
• /
• 제15권5호
• /
• pp.43-49
• /
• 1998

Adaptive neural network approach is presented for determining Electrical Discharge Machining (EDM) parameters. Electrical Discharge Machining has been widely used with its capability of machining hard metals and tough shapes. In the past few years, EDM has been established in tool-room and large-scale production. However. in spite of it's wide application, an universal selection method of EDM parameters has not been established yet. No attempt has been tried before to suggest a logical method in determining essential machine parameters considering the machining rate and resulting surface roughness integrity. The paper presents a method, which is focusing on determining appropriate machining parameters. Depending on the electrode wear and surface roughness, an adaptive neural network is designed for providing suitable machining guideline.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.109-110
• /
• 2006

The performance of a digital baseband signal processing and data transmission rate depends on the modulation technique. In this paper, We implemented DSP communication system for Underwater acoustic communication using by adaptive BPSK modem technique. In order to implement adaptive modem, we suggested SNR detection block. SNR detection block has the reference SNR value that selects between window filter path and matched filter path. In this paper, suggested system is based on software interface and all Hardware(PLL, modem filter, equalizer etc) is implemented by software, exclusive of DSP, A/D, D/A converter, SDRAM and Flash memory.

• 전자공학회논문지C
• /
• 제35C권1호
• /
• pp.42-54
• /
• 1998

For decreasing intersymbol interference (ISI) due to band-limited channels in digitalcommunication, the uses of equalization techniques are necessary. Among the useful adaptive equalization techniques, because of their ease of implementation and nonlinear capabilites, the neural networks have been used as an alternative for effectively dealing with the channel distortion. In this paepr, a complex-valued multilayer percepron is proposed as a nonlinear adaptive equalizer. After the important properties that a suitable complex-valued activation function must possess are discussed, a new complex-valued activation function is developed for the proposed schemes to deal with M-ary QAM signals of any constellation sizes. It has been further proven that by the nonlinear transformation of the proposed function, the correlation coefficient between the real and imaginary parts of input data decreases when they are jointly Gaussian random variables. Lastly, the effectiveness of the proposed scheme is demonstrated by simulations. The proposed scheme provides, compared with the linear equalizer using the least mean squares (LMS) algorith, an interesting improvement concerning Bit Error Rate (BER) when channel distortions are nonlinear.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.573-578
• /
• 2011

We propose a switching-based adaptive state feedback controller for a class of nonlinear systems that have uncertain nonlinearity. The base of the proposed conditions on the nonlinearity is the feedforward form, then it is extended via a nonlinear function containing all the states and the control input. As a result, more generalized systems containing feedforward and nonfeedforward terms are allowed as long as the ratio condition of the nonlinear function is satisfied. Moreover, the information on the growth rate of nonlinearity is not required a priori in our control scheme.

• 대한전자공학회논문지
• /
• 제20권1호
• /
• pp.37-44
• /
• 1983

본 논문에서는 MRAC 방식을 이용하여 이산 시간이고 잡음이 없는 단일한 입출력을 갖는 선형계에 직접제어 방식으로 적응 제어 알고리즘을 원용하였다. 직접 제어 방식에서 제어기는 매개변수형으로 구성되고 그리고 매개변수 조정을 위한 검증 알고리즘은 일련의 축차방정식으로 주어지는데 이는 가중 최소 자승법에 따라 유도되었다. 가중 최소 자승법으로 제어기 매개변수를 검증했을 때 출력 추적오차가 영에 수검하는 속도가 경도법 또는 최소 자승법을 사용했을 때보다 빠르다는 것이 컴퓨터 시뮬레이견으로 확인되었으며 또한 λ를 변화시키는 제안된 가중 최소 자승법은 규범형 모델 입력의 동파수 성분에 관계언이 사용될 수 있음을 보였다. 또한 이런 경우에 있어서 수험성과 안정도에 관해서도 고찰했다.